Tutorial Tuesday - Chasing and Repousse series #6: A demonstration of repousse

[@ss5gogetunks]

The hammer strikes sound like a power tool sped up so fast! Very impressive thanks for this! I'm excited to try it out. I'm going to start by making my own repousse punches. Money's tight :P

[@user-tm5rb3ne3e]

Thanks David, I'm glad you enjoyed. Good luck

[@BlueLineofthesky]

I love your work.

[@user-tm5rb3ne3e]

Thanks!

[@profjewellery413]

Nice work

[@cheliae8560]

Beautiful.

[@annabr776]

If for some reason I had to stop on a project and come back to it later or even the next day, would I need to do anything like softening the pitch? Thanks.

[@user-tm5rb3ne3e]

Sometimes if it is very cold outside, I will warm the pitch slightly, but besides that, no

[@---Blue]

Worst case heating up the pitch will help soften it, in desperate times you might be able to use the Oven for a while

[@luckydog854]

So to get the nice crisp edges on the raised areas, you leave the pitch pretty much room temperature? I’m just learning. The repousse never has sharp edges and the background is always really misshapen. The pitch is probably too warm? And, did you anneal at all during the repousse step? Or just once at the start? Thanks.

[@user-tm5rb3ne3e]

Hi, Thanks for your questions. If you watch the rest of the series, I think you'll find the answers to most of your questions. Cheers

[@beebeeralli2507]

So when you switch to Repousse do you also switch hammer, to heavier hammer? Or use same hammer you were using when you were chasing? Thank you, Bonnie

[@user-tm5rb3ne3e]

Good question. Yes I’ll typically switch to larger sized hammer when I switch to repousse depending on the tool size.

[@Justoaqui]

Awsome work bro , is that brass copper or what kind of flexible metals could be used , thanks .

[@user-tm5rb3ne3e]

This is 32 oz copper. Just about any sheet metal could be used, with the proper technique

[@grandadz_forge]

I make all of my own tools but after seeing your website it would be sweet to just plop down cash and get the whole bundle. LOL Maybe in my next life. LOL

[@louisedwards4023]

Did you make the master ,fleur-de-lis your self or copy ,,,,, eathr way it's very good work ,,,,, AND I MEAN WORK👍

[@user-tm5rb3ne3e]

Louis Edwards Thanks. I did make the original

[@louisedwards4023]

@@user-tm5rb3ne3e I haven't searched for it but is there a you tube about how? "I think I've got a BUG 😳

[@user-tm5rb3ne3e]

@@louisedwards4023 go to my channel. there are all sorts of videos on the process

[@louisedwards4023]

@@user-tm5rb3ne3e Yes, found , addicted,Thanks

[@karidust1]

I love Repousse. I just wish I could really do it that fast! Lol

[@user-tm5rb3ne3e]

Me too!

[@nahlaali6406]

@@user-tm5rb3ne3e 9 guy q6rzgy60l0yogp I 07

[@diamond2love]

Any power tool involved or simply hammering?

[@user-tm5rb3ne3e]

Only hammering

[@ulfheinni.b2633]

the piece of metal and the "drawing" (let's call it so) that one is going to use must be whider than the final product, right? I beg you pardon if my English isn't the best. I'm from Portugal and don't have many changes to write in English, for that its a liiiitle bit rusty. x)

[@user-tm5rb3ne3e]

The piece of metal that the design is on should be larger than the design, to minimize distortion, and give the pitch room to overlap and hold in place

[@chitowngamer7638]

Hi everybody, Try to use chisel with ball on the end. Much better and easy to do 3d

[@ulfheinni.b2633]

oh, and by the way... can wax be used as pitch?

[@user-tm5rb3ne3e]

Some people use microcrystalline wax instead of pitch, but it is not sticky so it is better to be used to fill vessels instead of using in a bowl with flat pieces

[@russellgraymiller636]

What gage copper do you start with?

[@user-tm5rb3ne3e]

18

[@brandonroth7926]

Where can I buy these tools

[@user-tm5rb3ne3e]

Hi Brandon, They are available at www.metalsmithing-tools.com

[@sandyreeves-walsh8920]

What wax is used to hold the work?

[@donna1351]

Sandy Walsh it's called pitch, you can get it on amazon for about £40 or on jewellers websites

[@user-tm5rb3ne3e]

Hi Sandy, it's the California red medium pitch available at www.metalsmithing-tools.com

[@stavroskostaras1590]

Μπράβο συγχαρητήρια υπέροχο κάνω την ίδια δουλειά πολλά χρόνια..

[@davesimmer5617]

What is the metal gauge or thickness for this project?

[@user-tm5rb3ne3e]

32oz or 18 gauge

[@bhsinnevnsndisn207]

Why dont you use hammer handpiece to make that more easy?

[@jeweltech3081]

What is the components of pitch? Plz

[@gianbattista]

mi direste dove comprare la pece grazie

[@madechoo]

Excelente trabajo!!!:.

[@s.s9397]

yeh kaam india me kaha hota hai? mujhe yeh kaam bulk me karana hai. kisi ke pas work shop ka number hai to send karo. thankyou

[@rajeshchary7122]

you can call me9603759022

[@bollywoodandpollythikana2286]

Mujhe yeh kaam sikhna pls KoI contact hai India me pls

[@arvinku6662]

Sir m bhi kar sakta hu

[@arvinku6662]

I also can do it

[@tomz7226]

Tamo eigi tan Amata sabiO photo tharake yagadaro sanglaD sabiO

[@amitverma0029]

Hi

[@violetaespejo9202]

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!