Follow along as Mitch installs a set of 12v Cummins injectors in this step-by-step direction video with some pointers and tips. Looking for a set of 12V injectors or parts? Check out our website. dynomitediesel...
Пікірлер: 22
@FreightDogs4007 ай бұрын
It should be noted that the crows foot must be at a 90 degree to the torque wrench. If not at a 90, you effectively lengthen the torque arm and a setting of 22 ft lbs becomes something more.
@billferris529211 ай бұрын
#1, cool rig Mitch!
@reedspaulding26588 ай бұрын
It is amusing that you simply lifted the injector out of it’s bore. They NEVER come out that easily. On my 95 the #6 injector was rust welded to the hold down nut, the injector wanted to turn with it’s nut. No penetrating oil, no heat treatment, nothing would break that bond. Finally, after breaking several tools to hold the injector from turning I just let it turn in it’s bore with the nut. Th]e locating ball ground its way up through the head. After cleaning the metal debris out of the bore, I installed new injectors. Of course, it HAD to be #6, never #1 or #2. Real mechanics told me that I needed a new head. 120,000 miles later I sold the truck with a still strong 300,000+ mile engine.
@ligmatubeandfab94877 ай бұрын
what did you do on the return line to make life easier?
@jaybee647711 ай бұрын
Is that a runaway engine plate to cover the turbo
@DynomiteDieselTV11 ай бұрын
Yes, it's a mechanical shut-off. Typically used in competition applications as a fail safe.
@alexandersmith932210 ай бұрын
my injectors came with 3 different size washers that go around the tip of the injector, should i just use the same size as the stock ones or use the thicker or thinner one?
@DynomiteDieselTV10 ай бұрын
Assuming you're running a set of our injectors for a 94-98 Dodge Ram then we recommend running the thin copper washers we provide which are 0.5mm thick.
@docksidemarine427311 ай бұрын
I just did a set of ddp stage 3 and also delivery valves. They work great however on the highway i get a constant light haze and covers anything i tow in soot. Should i try going back to stock dv? Or tighten the afc spring?
@witcher7111 ай бұрын
Check your fuel pressure at the injection pump. Above 35psi is textbook when the engine is working.
@docksidemarine427311 ай бұрын
@@witcher71 fuel pressure is 60 psi. Fass with tork tec fitting. Boost is about 10 psi total and 3psi from the big turbo at 70 mph 1900 rpm. Constant black haze i never had before
@witcher7111 ай бұрын
@@docksidemarine4273 And the EGT isn't out of sight? What DV's?
@docksidemarine427311 ай бұрын
@@witcher71 egt is actually better with these injectors. About 800 deg towing level and 650 empty. Pre turbo temps. It runs amazing, smokes less under heavy acceleration then my old stage 2s did and make more power for sure. But i did ddp street delivery valves at the same time. Thinking of trying stock dvs and see if my haze goes away. Its my only gripe so far otherwise great upgrade
@witcher7111 ай бұрын
@@docksidemarine4273 I have stage 2's and 055 DV's and no fuel plate. Super clean towing at cruise. I'm curious as to what you find. Best of luck.
@daviddroescher11 ай бұрын
3:30 "remove the stock horne it makes life easier." No it makes life possible.
@andrewgordon23523 күн бұрын
Is this port or direct injection I know some of the older diesels used port injection which washes off the valves so they don't get build up as bad as direct injection engines do.