Tvilum Walden Desk with 5 Drawers Assembly Instructions (How to assemble Tvilum 5 drawer desk) Anoka

This video is a step-by-step assembly guide for the Tvilum Walden Desk with 5 Drawers
✅ View the Product Here:
amzn.to/3QbDGlr - In Oak, White
amzn.to/3tww8ju - In Black Woodgrain
amzn.to/39nyfPH - In Truffle, Light Woodgrain
amzn.to/3Sr1N0H - In Chocolate
✅ Download The Instruction Manual Here (FREE): prime-spaces.c...
DISCLAIMER: This video and description may contain affiliate links that earn us a commission. This helps support the channel and enables us to quickly create more videos like this.

[@thepragmaticidealist4015]

This video is awesome! The only issue I am having so far is with section 7 found on page 13 of the manual. The chem bolts (#31561) are interlocking with the chem screws (#31687) when connecting GG to SP but when connecting HS to SP the chem bolts on the right side are not interlocking with the chem screws. The right side chem bolts continue to slip out of place as I try to interlock. In fact, it seems as if the chem bolts are not reaching fully into the chem screws. However, when i remove HS from SP and try to interlock bolt and screws directly it works. Am I doing something wrong or could this be a product defect? Thanks in advance! A new subscriber

[@Prime_Spaces]

Hey there! Try taking OUT the cam locks #31687, then insert the bolts #31561. See if the bolts are reaching all the way to the circle. If the bolts aren’t reaching the entire way then perhaps there’s a defect, but if you can see the bolt reaching the circle (closer to the middle) then it should be able to interlock. Give that a try.

[@rorriebanuelos1664]

hi i’m having the same exact problem and i can’t seem to figure it out i even bought be can locks cause i had messed up 2 of them but i still can’t seem to figure it out .

[@Princessedith.]

@@rorriebanuelos1664im still having issues with it idk what to do

[@sweetcuppincakes19]

@rorriebanuelos1664 @princessedith. I had this same issue so I came back to this video to see what I was doing differently and I realized that I had the back piece upside down - I had the unfinished edge on top. The unfinished edge should be on the bottom. After I flipped the piece, the screws interlocked.

[@lizramos9105]

Can I change the key spot for an actual knob?

[@Prime_Spaces]

Hey there! I don’t think so, but you can try. Make sure you remember how to put it back on in case the knob doesn’t work.

[@dawoodalgahim1606]

Thank you so much it really helped me.

[@Prime_Spaces]

Hey there! 👋🏾 Awesome! I’m glad this video helped you get your desk put together. Please, subscribe to the channel if you have not already. ✅🙏🏾

[@simplyvivianne]

Thanks for the video

[@Prime_Spaces]

Hay there! 👋🏾 I’m glad you found the video to be helpful and that it served its purpose. Please, subscribe to the channel if you have not already! ✅🙏🏾

[@somrai1016]

Which size of drawer slides do we need?

[@Bissah6]

Thank you!!! this was very helpful but I'm still having trouble with the drawer, it doesn't go in enough to be locked

[@Princessedith.]

Yesss same to meee

[@franaguejio6315]

Bsr frero j'aimerais connetre fait les production informatique.deja j'aprecit beaucour vo mantage mercie

[@areliecruz4641]

Can this be assembled even though I only have a handheld screwdriver? I don’t have a drill or hammer or mallet…

[@Prime_Spaces]

Hey Arelie! 👋🏾 Anything I’m using in the video I would suggest you have. You can use a screwdriver in place of a drill but it will take longer to complete.

[@poraliyogi6813]

Thank you

[@Prime_Spaces]

Hey Porali! 👋 You are very welcome! 😉Please, subscribe to the channel if you have not already. ✅

[@ibrahimshakak2094]

Thanks a lot

[@Prime_Spaces]

No problem, Ibrahim. 👍 Please, subscribe to the channel if you have not already! ✅

[@rubynicole3713]

Thank you!!

[@Prime_Spaces]

No problem! I’m glad the video served it’s purpose for you. Please, subscribe to the channel if you haven’t already! ✅🙏🏾

[@daryna.kk09]

I’m so confused on how to lock works. It doesn’t actually lock the drawer for me. Is there any explanation to that?

[@Prime_Spaces]

Hi Daryna! 👋🏾 In step 2 of the manual, you insert part #90801 into the table top. This part is what latches onto the keyboard lock when you turn the key. This part was accidentally edited out when making the video, but you can see the small white part inserted (just below my body) at the 01:19 minute mark. I hope this helps! Please, subscribe to the channel if you haven’t already. ✅🙏🏾

[@daryna.kk09]

@@Prime_Spaces thank you so much!

[@alayna7512]

thanks

[@Prime_Spaces]

You’re welcome! Please, subscribe to the channel if you have not already. ✅

[@Ang5linaa]

Ugh sadly I have no tools so I have to wait to build mine

[@sedraalhalabi1394]

Why so fast

[@Prime_Spaces]

Hey Sedra! 👋🏾 Adjust the playback speed as I showed in the first 15 seconds of the video.

[@RatgenerationX]

Why not just play in normal speed man. It's not like they are charging you by the minute to post the video.

[@Hyunjinssideyee]

I think it will prob be like a 1 hr long vid if he does that idk tho just an opinon

[@mayaalqahtani3494]

TttttttttttttHhhhhhhhhhaaaaaaaaNnnnKkkkkkk YyYyoooouuuuuuuuuu

[@Prime_Spaces]

Hey Maya! 👋🏾 You are very welcome. 😊 Please, subscribe to the channel if you haven’t already. ✅🙏🏾