Tvs Apache Carburetor Tuning ‖ Universal Method

Like my Contain ? watch These and I can bet you will enjoy !!!
Secondary Air Injector: kzbin.info/www/bejne/rYLMap6uZbB_e68
Tappet Settings: kzbin.info/www/bejne/nYCQomyVhpyBr80
Featured Engineering: kzbin.info/www/bejne/e32agIN_YtWSgKc
Fuel Mixture: kzbin.info/www/bejne/m5zQqn-GiNaFpLc
Welcome to a detailed and universal guide on carburetor tuning, specifically demonstrated on the TVS Apache RTR 200 4V BS4 model, but applicable to the 160 4V and all carbureted bikes across the planet. This step-by-step tutorial ensures that you achieve optimal performance and fuel efficiency with a basic yet effective tuning method.
Step 1: Initial Adjustment
Begin by closing both the throttle screw and idle screw completely. This provides a clean slate for the tuning process.
Step 2: Opening the Idle Screw
Gradually open the idle screw to allow more fuel into the system. This step is crucial for establishing a baseline for the tuning procedure.
Step 3: Engine Start and Rough Idle
Start the engine and observe the initial rough idle. This is a normal part of the process as the system adapts to the increased fuel flow.
Step 4: Increasing Throttle Screw
Gradually increase the throttle screw to elevate the RPM for a better tuning experience. This step sets the stage for achieving the optimal performance of your bike.
Step 5: Fine-tuning with Idle Screw
Once the RPM has increased, carefully decrease the idle screw until you notice a drop in RPM. This marks the sweet spot for your carburetor tuning.
Step 6: Final Adjustment Check
After achieving the desired tuning, carefully check for any fluctuations in RPM. A stable and consistent RPM indicates a successful tuning process.
By following these steps, you ensure that your TVS Apache RTR 200 4V BS4 or 160 4V, along with any carbureted bike, runs at its best. This method not only enhances performance but also contributes to fuel efficiency. Whether you're a seasoned rider or a beginner, this universal carburetor tuning guide is tailored to meet the needs of all biking enthusiasts.
For more informative content on motorcycle maintenance, tuning, and riding tips, subscribe to our channel and hit the notification bell to stay updated on our latest releases. Ride safe, and enjoy the optimal performance of your carbureted bike!
Music track: Start by Damtaro
Source: freetouse.com/music
Royalty Free Music for Video (Safe)

[@rohansalve1935]

Apache 200 bs3 me bs6 ka magnet lagane se kya hoga current jyada banega?

[@NHC23]

No

[@sza8679]

Mere bike main Over Flow ka problem tha , new carboretor Lagai abb Shock dana sa hee Bike salta hai nahi too missing hokay off hoo jata hai kiya karu

[@NHC23]

Pardon me but '' abb shock dana sa hee Bike salta hai'' - - - I didn't understand this clearly. Missing Kab kis situation me ho raha hai, wo vi batana.

[@darkHorse159]

Bullet bs4 ka btao brother kitna rhta h??

[@NHC23]

about what ?

[@darkHorse159]

@@NHC23 carburetor tuning ??

[@NHC23]

I did not get your point, kiska value batana hai ?

[@darkHorse159]

@@NHC23 okay sorry for inconvenience.. I have bullet 350uce bs4 I wanna tune carburetor so I wanna know how many turns anticlockwise for optimum mixture AF

[@NHC23]

Dear darkhorse, pura video aap dhyan se dekhiye, maine kahi par vi tuning screw turn count karke adjustment nehi kiya hu, opening ke time 4 turn bataya tha jiska matlab ye tha ki large open karna hai, aap chahe to kam ya jada vi kar sakte hai, then strat to close it nice and slow till rpm starts falling. Tuning a carburetor by screw count is not a practical method.

[@abhisekdas2862]

Kahan se automobile engineering pass kiye ho bhai

[@NHC23]

mobail ke baare mein veediyo na banaavenee, motarasaikil ke baare mein banaavenee.

[@ALFA95C]

​@@NHC23Bhai automobile..ah

[@NHC23]

@@ALFA95C 😜

[@rajeshronghang8749]

Mera bike 6k rpm ke bat rpm lag kar raha hai kya karu😢

[@NHC23]

1. check tappet clearance 2. check air filter 3. check engine compression 4. clean carburetor or fuel injector nozzle 5. check any leakage in intake manifold, gasket, engine body.

[@rajeshronghang8749]

@@NHC23 thank you sir

[@rajeshronghang8749]

Sir mera bike ka carburettor slide piston ghis gaya he isko change kar sakta hai kya?

[@NHC23]

@@rajeshronghang8749 nehi