Incredible Process of Manufacturing Truck Engine Piston-Production of Truck Engine Piston|

[@ben748]

When publishing a video like this, keep in mind that engine builders will also be watching. I watched it with a 50 year old engine builder. The piston at the end of the video is not the same as the one machined on the lathe. Most likely the master couldn't make the material he machined and they ended up installing a factory made part.

[@bigtreedeeproots]

Noticed the same, laughed just as hard. That final piston has a bunch of factory markings, they have never bothered to hide.

[@digicabtech]

@@bigtreedeeproots 100% agree. Fabrication. CNC has better accuracy.

[@bertfromnz9069]

@@bigtreedeeproots the lathe puts them on, it also fixes the porosity and puts the wrist pin hole in the right place :)

[@tech5298]

“In credible” was an apt title.

[@snarkybuttcrack]

I've never made pistons before, and I don't think anyone in this video has either

[@Анеботакоеже]

33:31 вынимают совсем другой поршень! 😅 Нас опять наипали 😄

[@СергейБаламут-э6м]

Я думал только я это заметил, то лужа была с боку, потом она по середине стала и гровировка на донышке появилась чудом🤣

[@Kori687]

А как вам поршень без колец в блок в конце установили?😄

[@СергейБаламут-э6м]

@@Kori687 Да да, точно🤣 Интересно, на каких д расчитанны такие ролики. А сейчас много кто не в теме, диванных много ничего не умеющих, все халявы ищут. Эволюция вспять происходит..

[@monoxromtv]

хоть бы номер поршня не светили

[@assldjalloul3478]

yes me too see that 😂

[@gvvggvgjj6724]

بارك الله فيكم وفي صنعتكم # MOROCCO

[@kafayathussain9637]

بزرگوں ماشاءاللہ مزہ آگیا جاب کا ، مگر Pine سگریٹ کا مزہ اپنی جگہ اللہ سلامت رکھے آمین

[@gvvggvgjj6724]

صناعة باكستانية متقنة فيها تحدي كبير للدول المتقدمة ،، الله يبارك ويزيد ،،، MOROCCO

[@StefSeva]

Что только не сделаешь для контента). И многие наверно поверят в происходящее))) но процесс изготовления настгящего поршня значительно труднее, и технологичнее. Но самодельный поршень можно в качестве сувенира подарить. Молодцы, сорвали куш просмотров.❤ Привет с Белого моря.

[@СергейБаламут-э6м]

Вы самого главного не заметили, поршень на 33.36 вынимают другой, заводской, лужа была с боку всё время, а потом стала по середине с гровировкой заводской на донышке! А вы уж сразу заводское ругаете🤣

[@владимиртерещенко-ж8е]

Технология литья в землю,зачет ! Отливка из говна долго не проработает!

[@andrealves9786]

Imagine the material composition of this?!, made with the remains of scraps, the trash!, tell me this will withstand the fatigue demanded by the engine! (Brazil) lol (laughs!)

[@leneanderthalien]

I worked for 30 years at Mahle, and believe me, pistons made in this way cannot work correctly, because a piston is very far from being cylindrical, its shape resembles a conical and oval barrel with a difference in diameter of more than half a millimeter between the largest and smallest part, this is done to compensate for the effects of expansion and mechanical forces, and the precision of machining, normally carried out with water-cooled diamond cutting tools is of the order of 3 thousandths of a mm for the axle hole and 8 thousandths of a mm for the maximum diameter of the piston, in addition the segment grooves also have a special shape and their fit and surface finish must be very precise = it is certain that an engine using these imitation pistons will work very poorly, smoke a lot and risk seizing quickly, in short the people who make it don't know how to make an engine...

[@Антон-л7я]

Да конечно, показали, как на коленке можно сделать типа поршень.

[@hans-williszimon3870]

What about shrinkage? The model for molding need some oversize to compensate the shrinkage when cooling down as well as some for machining. When using an old piston as model, the new one will be 2 mm smaller in Diameter and length. So funny video but useless process.

[@blindabinda1234]

These would definitely not be the pistons id put in my foxbody but have you seen the shit these guys do with their trucks that likely run these pistons.

[@AmericanSavageGarage-em2oy]

@leneanderthalien I watch these videos of repair and casting and they fascinate me, BUT I wonder about the quality and longevity of these fabrications. Nice post.

[@stevec8496]

you work , with what you got, it might last 5 revolutions of the engine , and be total rubbish, but it cost you 9p.

[@stefanocaneparoneto1189]

Realmente é um processo artesanal sem muita precisão. Más em um país com a imensa população pobre que passa de 1.4 bilhāo é um orgulho ter pessoas como essas trabalhando. Parabéns pela iniciativa.

[@videowale7720]

Its Pakistan brother not India

[@crazyloras]

It’s called job security 😂 next month customer will be back for new piston. It’s funny the ending with a completely different piston

[@MrMuncieman]

LOL

[@teguhdjunaedi3088]

Bukan bln depan ganti piston lagi cukup satu jam piston itu sdh memuai kena panasnya putaran mesin,paling tdk mereka sdh menunjukan bisa membuat piston

[@حسينالحب-ب3ك]

فنان تستحق جائزة أفضل صانع ❤

[@EmmanuelGhapoutsa]

Super C'est vraiment magnifique moi j'aime beaucoup la fabrication.

[@hansrajbhaitanti]

Wow! Really, this is a very nice & ever useful, best picturised Vlog video of Production of Truck Engine Piston.

[@bourlayecoulibaly9104]

I like what they are doing but my concern is they sefty?

[@Wilson.enriquez381]

Very very nice amazing work 👏👏👏

[@EMANWeldingVlogs]

I salute the man who makes a piston🎉

[@xanderdean02able]

These guys are making miracles happen with dirt while more than half of americans dont want to work at all ..hats off to you great work .

[@charlesfarrugia3743]

Miracle for sure: inserting piston without a ring compressor, and gudgeon pin without circlips.

[@trevorspeedy6333]

No miracle, the whole thing wrong in so many ways

[@TheGondal86]

@@charlesfarrugia3743 That was just testing

[@rockyj2008]

You sure got that right

[@workoholekhh7542]

Are you sure? This is fake. The piston at the end it is not that they TRIED to make.

[@tahaali8736]

بأدوات بدائية يصنعون حاجيات ذات قيمة عالية لهم كل التقدير والاحترام

[@nopelindoputraperkasa5869]

Very inspiring and creative.Excellent Greeting from Indonesian traditional gold prospecting 🇮🇩🌼🌺👍👍

[@bharamurayar3025]

Salam bhai. Eid mubarak. Happy holi.

[@andreasali6588]

Dengan alat sederhana kemampuannya luwarbiasa,hebat,dan cerdas👍👍👍🙏

[@СергейБаламут-э6м]

33.36 Поршень подменили на заводской, посмотрите на лужу в поршне, она посередине, а до этого она была всегда с боку, плюс на донышке гравировка появилась заводская, да и качество поршня в целом изменилось! Зачем обманывать? 🤦‍♂️

[@fill3687]

Они же не дебилы, ставить овно в двигатель😅😅

[@glennkamers]

It's for the KZbin views only

[@ms-fair]

Ну ладно гравировка. Может там чем то современным набили. Но эта камера сгорания или как там ее была кривая и большая как хрен знает что. А тут стала меньше аккуратная и ровненькая

[@cedricserieys9768]

33:34 : Top of the piston engraved with serial number... Magic !

[@teguhdjunaedi3088]

Padahal seri no.diatas piston dibuat dgn sinar laser yg halus hasilnya,tdk mungkin diketok seperti membuat plat no.

[@rudycoyy]

First they casting new piston but in the end they realize it doesn’t work and decided to buy new one , at least they tried

[@sylvesterthaxter3889]

Yeah i did see the switch at 33:31 abd thght what!!! that's totally difference....we g I t scammed again😅😅 ..still love old skool machinery beautiful craft😊

[@techweed7861]

1:16 Choli ke peeche kya hai 😂😂😂

[@alshaa1699]

Very Good Job 👏👏👏👏👏 Excellent. God Bless You All Moslem Brothers

[@СтаниславПорманчук]

Я радуюсь от Вашей работы. Дай Вам Бог хорошую мастерскую,чтобы Вы там творили свои чудеса!

[@КонстантинКислов-л1к]

Если бы тебе достался двигатель, сделанный такими вот "мастерами" в шлепанцах, ты по другому заговорил бы тогда.

[@СтаниславПорманчук]

@@КонстантинКислов-л1к а вазовские стирильные сделанные в цехах с Масложором моторы как вам?

[@psholnah]

Дай им хоть 10 хороших мастерских, через два дня все будет лежать на полу среди грязи и ишачьего дерьма.

[@albertomatos878]

Olá bom dia! Parabéns pelo seu belíssimo trabalho! O senhor é um profissional de mão cheia!

[@Антон-л7я]

Ага профессионал😂. Не ужели на экспорт делает? На завод MERCEDES BENZ😂

[@saeidghafari6392]

Hello. I think there was a mistake. The piston shown at the end of the video is very different from the piston in turning. It is illogical to make such a piston in turning. In my opinion, this is a show and cannot be true. But with this Now they tried hard and it was interesting

[@robertocarta6246]

Infatti il pistone che toglie dal tornio alla fine è un pistone industriale, vi sono anche le scritte laser sul tetto, niente a che vedere con il soprammobile che stava lavorando....

[@johnhili8664]

Si concordo qesto titzio sta barando🤔

[@glennkamers]

Purely for KZbin views

[@kaduskye]

Parabéns pelo maravilhoso trabalho artesanal. Como foi dito em um comentário anterior, esses pistões ficaram lindos para serem doados ou vendidos como presentes ou souvenirs. Num ambiente de trabalho à altas temperaturas certamente terão uma vida util hiper reduzida, pois o processo de fundição normal é muito mais complexo. No video não mostra se foram adicionados outros componentes para melhorar a liga do aluminio, mas se foram só sucatas, sabe-se lá que tipo de material foi fundido. Outra detalhe é saber se esse material não apresenta porosidade. O processo de fundição foi bem artesanal. Nada a ver com o industrializado. Como souvenir nota 10. 🎉🎉

[@marekolek5477]

Robia gowno z gowna?

[@wotplay732]

Прикольно. Вытачивал отлитый кусок металла. В итоге взял заводской новый поршень ... Фантастика.

[@vituning1]

Ещё и кольца перепутал 😂

[@sergserg8504]

​@@vituning1 еще и в блок без колец запихнули

[@mansuetogirgenti4575]

1q1.​@@vituning1

[@andrelersch8987]

Ja trabalhei muito em torno Ja acompanhei muitos profissionais fabricando peças em tornos. Mas esse senhor da para dar os parabéns. Usando um torno velho certamente cheio d folga sem precisão alguma fabricando pistões M perdoem os simpatizantes do canal não levem para o lado pessoal. Não tem chance destes pistões funcionarem corretamente.

[@ЕвгенийАлександрович-с9г]

Ну как они будут работать если смесь собирается с земли там обезательно будет мусор который сгорит при заливке и будет раковина?

[@RooseveltMarques]

o pistao é diferente. e novo.

[@edwardlara1011]

I doubt they would spend that much time and effort if they didn't work properly. My respects go out to these hard working and intelligent folks. I'm also impressed by how well they work together. No ass grabbing or horse playing just work work work....

[@flaviomasenadore2392]

Si infatti anche loro si sono accorti che non poteva funzionare tanto che al minuto 33:30 hanno sostituito il pistone con uno nuovo😂😂😂

[@Анеботакоеже]

Что наливают в песок? Отработанное моторное масло ?

[@олегядевич-д9ь]

да

[@Koordiant]

@@олегядевич-д9ь Нет

[@Fish_Villain_mBiakuLu]

Soo amazing...i love like it👍👍

[@CoolIdeasDIY-qv1nz]

Brilliant, my colleague👍

[@knobsdialsandbuttons]

Great skills ! 👍

[@ibrandiaye9498]

at 33:30, the piston is suddenly different. It's like they inserted an original piston at this time, and didn't show how they finished and made small holes and engraved text on piston. This step was important to show ! however the rest of video is nice.

[@nonconformist4802]

Nice casting attempt. FULL OF CASTING DEFECTS. Great educational video of HOW NOT TO DO IT.

[@هيثمهيثم-ق8م5ث]

الحاجة هي ام الاختراع ...برغم امكانياتهم البسيطة واليدوية يصنعون اشياء جيدة للتعويض عن النقص وغلاء السعر مرحى لهم.

[@eduardooliver6146]

Trabalho incrivel de mecanicos raiz! Aqui no Brasil se vai na loja e compra essa peça pronta, mas ver o processo artesanal de produzi-la é muito interessante!

[@АлексейМихайлович-ж5ж]

Ещё интереснее будет, когда этот поршень у тебя заклинит. Но это всё ерунда, потому, что т, что они делали и то, что получилось, две большие разницы.

[@HadirinTea]

😂

[@RooseveltMarques]

O trabalho foi legal, mas o pistão que foi usinado é diferente do que foi o apresentado. O pistão é novo!

[@pedrogoncalves7227]

Pouca tecnologia. Mais muita inteligência parabéns ótimo vídeo

[@teguhdjunaedi3088]

Luar biasa kemampuan Pakistan membuat spare part termasuk piston bisa dibuatnya padahal untuk piston diperlukan campuran almini dan logam2 lain yg tahan panas untuk menghindari pemekaran waktu mesin jln dgn gesekan2 piston dgn furingnya yg sangat panas yg bisa mengakibatkan kemacetan

[@griggs310]

Продвинутый формовщик, в кроссовках! Элита чё)

[@AsitShouldBe]

At the 33:10 the piston has been transformed to industrial one😂😂

[@JulnaAlsaint]

J'aime beaucoup votre travail

[@grahaml6668]

Well the guys do have very flexible joints, I'll give them that!

[@silvaandre1881]

😱😱😱😱ASSUSTADOR COMO FABRICÀO QUANTO AS ROUPAS DE SEGURANÇAS : LUVAS ? CHINELOS ? TENIS PODRE ? ROUPAS SEM LAVAR FEDENDO , SUJEIRA A REVERIA MEU DEUS DO CÉU É ASSUSTADOR ESTE VIDEO. 😱🙏🏼😱🙏🏼😱🙏🏼😱🙏🏼😱 NEM A 100 ANOS ATRAS ERA ASSIM JAMAIS . AS FABRICAÇOÊS.

[@mehmetingel6867]

ELİNE SAĞLIK ÇOK ĞÜZEL OLDU YALNIZ PİSTONUN ÜZERİNDEKİ SİBOP YUVALARINI AÇMADIN

[@georgesfotsing5271]

Waouh félicitations ❤❤❤

[@antoniodepaduasoaresfilhos6846]

Decks como os CD 3700, 4000 e 5500, nem se discute, os melhores.

[@Tatal.b]

O que é bom tem que ser mostrado, valeu parabéns

[@johnmilner7603]

I hope they wash their feet before going to bed. No need to check piston ring gap 😮. WTH. 36:43 no one bothered to install rings in this piston.😂

[@alex-seyg.3777]

Часовой индикатор у них интересный.🤣 Почему не показали как маркировка на поршень наносилась, и как сверлили отверстия под смазку пальца?

[@АлександрМурманск-н7ф]

Не показали как отверстия под палец калибровал и вообще это разные поршня. Нам показали принцип а не весь техпроцесс.

[@fill3687]

​@@АлександрМурманск-н7фначнем с того, что поршень отливается под давлением

[@sandroscano2483]

Io non li vorrei quei pistoni nella mia auto,bravo però il tornitore ha fatto tutto a mano senza uso di un controllo CNC 👍

[@sanjeevsharma9036]

मै काम की तारीफ तो कर सकता हूँ जो मेरे देश के लिऐ हुआ। जय हिंद।

[@sonykhan1196]

hanji lister ingene k flaiwheel bhi banadoge kitne k ban jaenge

[@BarryRudge]

The method of manufacture shown here make me wonder whether any two pistons end up the same size. And the Piston shown at the end wasn't the same one as we saw in the lathe.

[@wandofiuza8425]

O pessoal são bons no que fazem. Parabéns

[@ПавелПивовар-з7б]

Такие поршни на один раз завести двс херню слепили из металлолома в конце заводские поршни показали клоуны😂😂😂😂😂

[@Andrey98066]

The customer of pistons is Мad Мax I think)))

[@Hamidthiaw4782]

No gloves 🧤, no mask 😷 and no safety shoes. And it works .

[@GoodManJames-z5l]

Even though Health and Environmental Hazardous but it can still be improved. Well done.

[@LegendLength]

It would seem easier to take a solid chunk of aluminum and skip the casting process. Just drill out a big hole for the inside.

[@BALWINDERSINGH-gn2hr]

Very good job 👌🏻

[@samsontadesse9499]

Hard workers of the world 🌎!

[@rotuloeltigretigrillo4283]

Si son cosas serias de q país es me dejo bien admirado como trajan excelente trabajo un saludo de el salvador buen trabajo de admirar visto 9/2/024

[@heresdeorum1453]

номера на торце поршня прямо на токарном вырезали. причем изнутри токарного, ну мастера! ну кудесники! впервые вижу токарный станок с функцией нанесения лазерной гравировки....

[@homosapiensinfuturae]

It is written, incredible process.🤨 Unbelievable!🤔😂

[@aliasaf9118]

Hurra, hurra. Pakistan industry, great. 👍👍👍👍🇵🇰🇵🇰🇵🇰🇵🇰

[@otmanovanony8206]

L'effort est certainement considéré et considérable, cependant il faut penser à rendre plus précise l'étape de la coulée pour éviter tout ce temps consacré à l'ajustage. Ceci dit ,si l'on veut bien sûr continuer à travailler les pistons dans le cadre de ce processus. Sachant bien évidemment qu'il s'agit d'un atelier de réparation et de remise en état des pièces défaillantes

[@alevuwka]

тот случай когда работаешь на производстве, при просмотре таких роликов понимаешь что ведь большинство в это верит) ну да собственно зачем нам металлурги, конструктора, технологи, чпу оборудование, бтк и т.д. когда вот так вот можно все на коленке сделать) смешно конечно)

[@РоманМатвеев-ь6й]

Оптимизировали производство люди, все нормально. Чего дармоедов кормить из итр и прочих.

[@arhim7650]

@@РоманМатвеев-ь6й Ну да, кого интересует развесовка и прочие параметры, ну размотает коленвал и весь движок на высоких оборотах, ну и ладно.

[@abelkingu4653]

Excelent works-From TZ

[@rejuoi9217]

Великолепное шоу😂😂😂

[@sams546]

The song in the background 😅😅 sanju baba rocks😅😅😅

[@TheWhanfried]

Let’s see the shirt sleeves get pulled into the machine.

[@pedroteixeira_de_PORTUGAL]

O piston do minuto 33:20 não é omesmo do minuto 33:21

[@victoreduardourquhartvilla6976]

Entiendase de una vez por todas. La necesidad deun puesto de trabajo para la vital subsistencia es lo que lleva a esta clase de actividad. Todo ser humano lucha con lo que sabe y lo que tiene para comer, mantener una familia y ganarse la vida honradamente. Este video es un ejemplo de habilidad para la supervivencia. Quien juzgue la calidad, la precisión o la durabilidad, esta fuera de contexto. Estas personas son dignas de administración y lo que producen es para que dure el tiempo necesario,de modo que reciclando mantienen el mercado barato y la continuidad del trabajo. No se trata de calificar el producto. Se trata de conocer otro modo de vida. El otro mundo que desconocemos. Por supuesto el youtuber quiere impresionar para likes, mostrando al final un piston elaborado con alta tecnología. Pero quienes conocen la materia, no se tragan la mentira. Un aplauso para los humanos por su habilidad y esfuerzo. Si para ellos vale, genial, si para la otra parte del mundo entendido y tegnologico, NO. Seamos felices todos, cada quien con lo suyo. Buen vídeo para exibir la otra cara de la moneda. Un saludo a todos los trabajadores honestos y sacrificados.

[@soulr34v3r]

Y porque muestran un piston nuevo comprado al final del proceso

[@jorgeschmidt3119]

Estos pistones se fabrican de esta manera pues seguramente es para un motor del cual no se consiguen repuestos, pero no están correctamente fabricados. Primero hay que tener en cuenta que son de una aleación de aluminio, y usaban cualquier tipo de este metal. Podrían haber usado para fundir pistones en desuso. Segundo, el pistón no es cilíndrico. Si se mide su diámetro en pistones originales, se podrá comprobar una pequeña ovalacion en el mismo. De cualquier manera, el repuesto va a funcionar y sacar del apuro.

[@danielweinberger4093]

Hola, aparte de ser elípticos en la parte de la cabeza son más chicos porque reciben más temperatura y tienen más dilatación

[@ДенисИванов-э7я9я]

Ха ха поршень они выплавили, при обработке видно пористость металла. И поршень вставили заводской с магазина . А про установку вообще молчу, ну ладно шатун установили но всунуть поршень без колец и крепить на коленвал😂 Компрессия будет 🔥

[@2.s.service]

Там кольца в картер просто кидаешь, они сами становятся на место потом!

[@kotovsk66]

в пидаРашке так все делают. гггг

[@rishabhsharma-sg3rq]

When we see last part of this video ,we can clearly see laser marking on piston. From where it came as there is no laser marking before. It means piston shown on Lathe machine and piston fitted are both different.

[@sanjeevsharma9036]

मजा आ गया। आपको धन्यवाद

[@adrianvasile4683]

19th century technology. What amazes me is how many people are amazed about it. OMG! What kind of alloy is that?

[@TranquilinoGonzalez-yb7fd]

Increíble lo que acen los hombres Son Como Dioses se merecen Ser Santos😅😅😅

[@nuwanpradeep5010]

In the end it was funny😂😂

[@mikethompson7290]

Metallurgy, I wonder what the composition of the scraps they use to make a pour? After all its a crap job anyways the piston can't survive long with a material they used not to mention the dirt that gets introduced into the mold and the molten material

[@br0nduljak]

We saw the film "Moonshiners". Marking the place under the finger with a line for the “sea eye” and checking with a caliper is reminiscent of the Goonie who poured half a bag of sugar into a vat without looking, checked with a slide rule and added two pieces of sawn sugar.

[@蔡武訓-l1k]

這就是。。。。經驗嗎！

[@bigtreedeeproots]

That movie is a classic.

[@mitch9198]

Did anybody spot the mistake.. no piston ring compression tool...no piston ring locating lugs on any grooves and the one they show you fitting certainly wasn't the one he machined.

[@PrabhuKumar-dt5bu]

The Best Amazing Working

[@bernardobueta7573]

Very hardworking...

[@thunderbirdone8126]

A depth measurement from the piston top to the crown of the installed pin would be a good rough measurement of squareness, since the skirt and top of the piston were machined together.

[@ВладимирЧубуков-я4б]

Им каждый раз что то снится, по меньше курили бы артисты😂

[@instgdeadj]

CORRETÍSSIMO, fabricar pistons sem o menor conhecimento de engenharia mecânica e complexas medidas e formas de usinagem é LOUCURA. imagine a qualidade destes motores???? kkkk😊

[@SajidShaikh-je4nx]

There's no doubt that this people are talented they have good skill of runing business, if there's no perfection in there work they would have not continued their buisness,The engine would heat up immediately, costomer would have come running with the major complaint after every single production. why would anyone waste his time and energy for making substandard quality product. This really indicates that they are doing a good job they are poor have no support from government. and this is how they take care of there family by running small workshop keep it up , work harder, and should take the initiative to do a fair business to improve yourself and for your own country

[@workoholekhh7542]

The material they used are so soft for a truck piston.

[@mcbalitofarmtv4710]

These guys are hard workers

[@marcionascimento9409]

Agora eu sei de onde estao vindo as peças que estao sendo vendidas aqui no Brasil😂😂

[@roberdbarthelus1410]

Vraiment intéressant.

[@tamhanh7253]

....ÔK .. GOD...! Thank...! ( PISTON MADE INDIA ...! )...

[@Делайсам-м8о]

Наверное так делали поршень в начале 20 века. Ресурс работы его не большой 😅

[@rico1074]

What a scam no way that was the piston he was making 😂😂 he must have a laser engraver tucked away in the back room to put in the unnecessary part number 😂

[@valterjunior5177]

The piston that appears at the end being applied to the engine is far from being the same as the one at the beginning! Completely different pieces

[@Yovani.-_91]

Vi el vídeo por puro entretenimiento porque de eso no se nada. Pero noto ese trabajo como artesanal y a la vez industrial