MATLAB - Simulink Tutorial for Beginners | Udemy instructor, Dr. Ryan Ahmed

Learn the basics of Simulink with Dr. Ryan Ahmed in this video, MATLAB/Simulink for Beginners Tutorial.
Take the full course on Udemy with a discount using the following link: www.udemy.com/matlabsimulink-...
Build 10 Practical Projects and go from Beginner to Pro in Simulink with this Project-Based Simulink Course!
This course will cover the basic of Simulink and students will be able to create basic Simulink models and run simulations. Students will be able to develop fun, useful and practical Simulink models from scratch.
In this course, students will be able to:
- Experience a true practical project-based learning experience, we will build 10 Simulink projects together
- Access all the Simulink models and slides,
- Receive a certificate of completion to post on LinkedIn profile to showcase your skills in Simulink to employers.
- Receive a risk free trial with 30 day money back guarantee so you can give a course a try risk free!
What you'll learn
- Develop Simulink models in a practical, fun and easy way.
- Develop, simulate and analyze electrical and mechanical systems in Simulink.
- Understand the basic concepts of control systems and develop your own controllers in Simulink.
- Understand control system theory, develop PID controllers, and tune these controllers in Simulink.
- Impress future (or current) employers with your marketable skills in MATLAB/Simulink
#MATLAB
#Simulink
#Udemy
#ITeachOnUdemy
Share your story with #BeAble

[@kaluobinna6907]

I watch your video sir I used to be afraid of simulink thinking it is difficult, but you simplified it for me God bless you sir. Am a total beginner I really need more useful video am writing from Nigeria.

[@applyyourimagination1728]

How has your MATLAB journey been?

[@8kSarah]

This tutorial was absolutely great! It was my first trial with Matlab and I absolutely enjoyed it! Thank you!

[@harshsharma4692]

Thank you very much Sir. One day before i know nothing about MATLAB, now i am gaining confidence and learned so many thing from this lecture. You are GREAT teacher.

[@leemontgomery7914]

This is what I’ve been looking for‼️

[@belloamadu3773]

This is great! It has added a lot to my knowledge on electronics systems design using Simulink. Please keep it up! Thanks.

[@AJEETKUMAR-ej5st]

This is really good simulink tutorial to start with. Thank you sir...

[@paulmccumber9291]

Outstanding. One of the best technical presentations I've seen.

[@klong4128]

Very good introduction to MATLAB Simulink Modeling. When I first self learnt MATLAB Simulink 5 years ago through Matlab Simulink ,I absolutely see Star and Stared at the two thousands pages Training manual/book . After try and error through examples/internet-self teaching for one month. I fully understand and I am able to teach secondary school engineering classes. You demo MATLAB Simulink with video example for beginner. Very informative and demo with hands-on example . Very good job done !

[@thomashowells6337]

A very informative video! Well worth the time to listen, thank you Dr. Ryan Ahmed! :) I took a C++ training for a masters and felt like I was missing something like this to better understand pulling together all the possible variables and manipulating them in MATLAB/Simulink. MATLAB/Simulink are expressed as totally different entities. Thanks for setting me straight on that. It has been a long time since I had my combustion, emission and engine controls classes in 1974. I am in engine controls now and the experts talk over your head. There is so much more to learn. This is a great start. 😀

[@bonzaiii3]

Great tutorial, one of the best I've ever seen!

[@sandarwin-vr6xg]

Thank you very much more than I can say. The Great tutorial!

[@kyawtkyawthtay3449]

This is a very good simulation tutorial and I learned a lot. Thanks a lot Dr. Ryan Ahmed!

[@melmeja]

Dr. Ryan, was born to teach! ... I Love Your Tutorial. If I get a money, I will learn/watch all your video classes.

[@papaimoeda]

OMG amazing teacher. Amazing class. SUPER! Thank you sooo much!

[@debashishghosh1233]

It is helping me to start my thesis simulation. Thank you very much.

[@Jigs3108]

absolutely outstanding explanation Ryan. I must appreciate it.

[@monikaborkar2876]

Hello Sir, what type of difference will create in output scope if we use merge block rather than mux block????

[@monkeydruffy9492]

You have truly nailed it! Thank you very much!

[@sarjanatelo1052]

Thank you very much for the great tutorial, sir.

[@trungluong1290]

Wow i wish i would find this earlier. Really details and helpful

[@martinbeveridge3204]

Very positive presenter and great introduction to these tools... Thank You

[@roshnaabdulqadir5306]

1 Million like for you Ryan. You are amazing. Thank YOU.

[@stokesarisnet]

Great tutorial. I do have a question for project 4. The If Action Subsystem blocks have to repeat the same logic as in the if block. Why can't you just route the outputs of the If block directly into the merge block? I'm guessing it's just an implementation issue ?? Thanks again for a wonderful video!

[@hokmuranbayramov6906]

it didn't link to the normal matlab in my pc. what is the problem? Does someone face with this problem?

[@saberhasan9849]

The most important thing which is so amazing is your way to explain information simply and easily

[@beoptimistic5853]

kzbin.info/www/bejne/nIPchpljfL5qa5Y

[@dennissinitsky9779]

watched a few Simulink tutorials and think that this one is the best -- very good choice of examples and demonstrations, very well narrated. Thank you Dr. Ryan Ahmed and Udemy!

[@moustafarefaat6155]

can input instead of sin wave can it be coordinates ? i mean in if conditions ?

[@isiomanwabineli344]

Just your expression at the beginning of the video is very encouraging

[@altwajrebaseem8301]

Thank you very much. The Great tutorial!

[@sirajsaid658]

this makes me familiar with math lab even if , i am beginner and so easy, thank you so much!!

[@mahlive8125]

Want more projects from you. Appreciable Tutorial, I Love it.

[@prof.jamesasuquo7054]

Thanks. This is one of the best presentations.I'm very impressed.

[@musaalihdaniel5846]

Please, I will love to get tutorial for discrete Fourier transform algorithms. Thanks for the great work.

[@libo3308]

Absolutly amazing, thanks for sharing

[@JW-kl2wd]

Thanks so much for the video, but i am wondering why the userinterface on my version of matlab is different, so that i coud not choose 3 axes for the scope and other stuffs! is there any solution? it is really quite different!

[@yaochen5058]

This is a very good simulation tutorial and I learned a lot. I wondering what is the next tutorial as a beginner. Thank you.

[@sleeplessrobot9398]

kzbin.info/www/bejne/rKndg2aNZ6eWiM0

[@zikermu]

You are a great teacher .Thanks a lot .

[@guohaoye9628]

This is just and amazing and gorgeous teaching and I just love it!

[@eskedarayele3328]

Thank you so much. You deserve to be admired what a great lecture!!!!!

[@beoptimistic5853]

kzbin.info/www/bejne/nIPchpljfL5qa5Y

[@moustafarefaat6155]

can input instead of sin wave can it be coordinates ? i mean in if conditions ?

[@rickygogoi]

Thank you for the video. It is indeed very helpful for beginners like us.

[@sirius9038]

So amazing! Excellent teacher!

[@wahyuwah4306]

Such a nice lecturing. Thanks!

[@masalakinkela4940]

How can I have the mathematical equation of each signals from what we have done? It's my first time to use Matlab can't lie your explanation is great. I wanna learn more. Thanks Dr

[@drvijaybhatkar938]

Very Good for beginners, Is the library contains a refrigeration cycle? Thank you very much for the informative and interactive like session.

[@alanyanezalvarez5125]

Vi algunos tutoriales de simulink y creo que este es el menjor muy buenos ejemplos y demotraciones

[@muhammadshehbazaslam4549]

Hope you are doing well Sir I have developed model of solar and wind in simulink. I am using two controllers PID and Fuzzy but the simulation runs very slow... How I can run simulation faster?? Thanks

[@alexandercastaneda9431]

The best tutorial. I bought your course!

[@alexandercastaneda9431]

Greetings from Perú!

[@azninpb]

thank you sir....just beginning to explore....ur teaching is simple yet powerful....just subscribed....

[@durgeshverma8394]

Sir which mates i should apply in the solidworks so that it gets perfectly imported into the matlab. I made a sliding(prismatic) joint model in the solidworks and I want to simulate it using simulink/matlab

[@landonsugar1085]

Great tutorial! thank you very much for the help. At 19.38, why did you use a period instead of a comma to plot "Data"?

[@AJEETKUMAR-ej5st]

It is because the headers Time and data are there in Sum_out variable. SO all the column headers are kind of struct variable with their structure.

[@irfan000pakkada]

Jazakallahu Khairan. Very useful...

[@husseinshutari5209]

Could you please help me to solve the following error as you expert in matlab? Error using fun (line 16) Derivative of state '1' in block 'model4/PMSM /Integrator' at time 1.09996 is not finite. The simulation will be stopped. There may be a singularity in the solution. If not, try reducing the step size (either by reducing the fixed step size or by tightening the error tolerances)

[@menagas2266]

Great tutorial sir. Can you give the tutorial on implementing networking projects in simulink.

[@joeltorres3511]

Very good content... Best for beginner's video I've watched until now. Thanks for the content all the way from ITCG in Mexico.

[@dellpi3911]

kzbin.info/www/bejne/f5LRmIt3eKuKapo

[@kundankumar-dt5uu]

Hello sir, this is very informative video,may you guide me where can I found the inverter designed in simulink which work on variable frequency

[@jitughori3119]

really very good explanation and you made MATLAB very easy. Thank you so much.

[@faisalamir8826]

Nice tutorial, thanks very much.

[@gharbialaddin6159]

that warning sound

[@mohabelshreif130]

appreciate your work Dr. Ryan

[@drewcunningham7359]

I have to say that I think you did a great job and this is very useful as a tutorial. But as much as I like to use the word "basically", I wonder if anyone has done a count for how many times you said "basically" during the video? Just teasing a bit, the material and explanation are superb.

[@RoseKnight04]

Awesome, thank you very much for your effort

[@ParthPatel-id9hf]

A must watch video for beginners. Amazing tutorial.

[@beoptimistic5853]

kzbin.info/www/bejne/nIPchpljfL5qa5Y

[@lindaafifa1997]

thank you sir, this is good tutorial, very useful..

[@sumadesai3536]

Which version software is used for MATLAB simulation in Android phone using plz help me.

[@ihj6085]

Thank you sir. This video is very helpful for me.

[@reihanehmirjalili7467]

It was an amazing tutorial. Thanks!

[@johnstaif846]

Thanks, time well spent.

[@Ashok8808a]

i have learnt lot sir, thank you

[@damaeric9673]

hello, my name is Eric, I am an electrical engineering student, I use Matlab/ simulink 2018 for my thesis. I would like to simulate an electrical network with a FACTS system (TCSC) but I can't find it in the simscap library. what do I have to do. thank you

[@bandilejama2346]

Thank you! I would like to understand the model linked to hardware...e.g. driving a stepper motor.

[@vinodsukhadeve602]

Very good tutorial.. Sir.. I have understand now whatever the question asked in interview in single video

[@nivaabraham8535]

Please Share your interview questions

[@ronycarrillo7052]

Great tutorial. Thank you very much. I am wondering if you have or can make a video for using a function script written in MatLab to solve a system of ODE's, but calling it in from Simulink.? Please. Thanks for your time.

[@beoptimistic5853]

kzbin.info/www/bejne/nIPchpljfL5qa5Y

[@konehnorbert6300]

thanks for the video. Please I want to plot a 3D surf of two equations united by ‘if’ and ‘else’ statements. For example. “if X>Y Z=2X+Y elseif X

[@muktichaturvedi5994]

Hello Dr. Ryan Ahmed , is there a channel community page, where queries on SIMULINK modelling be discussed? I am working on a project where there is a need to model 3 subsystems. I need help with these, mentioned here in brief: (1) to model ohmic heating of a resistor and measure the rising temperature with resistance/ voltage variation (2) To model an electrical arc as a switch - open switch initially indicating no arc and closed switch with some resistance after some duration (3) to model a hydraulic system which connected to a surface and moves it backward and forward in certain time duration. Any suggestion by Dr. Ryan or others in this domain in modelling these will be highly appreciated.

[@abhijit9339]

i am having a doubt in connection of bldc motor please could you help me out while simulating for an ev / hev

[@jesusfuentes7589]

Thank you, sir. Great tutorial.

[@rickygogoi]

Thank you very much. I have learned very important points from the video.

[@mukeshbathre9083]

I am working on Hybrid Energy Harvesting Model? What part of Simulink should I learn? What else should I learn?

[@trigggedgaming8541]

Its a good tutorial for me as a beginner, Thank you Sir

[@beoptimistic5853]

kzbin.info/www/bejne/nIPchpljfL5qa5Y

[@shireenkhalil-zo3el]

hi, hope you are very good l wounder how I make the sine wave block used in project_trial1 to be input to operational amplifier because it didn't want to connect

[@ShivamKumar-xh5wf]

Really a great to go video. Very much helpful.

[@rusirurajakaruna3693]

Excellent explanation... Thank you very much

[@naafyaddeme6619]

Very important point you gave us. Thank you Doctor.

[@beoptimistic5853]

kzbin.info/www/bejne/nIPchpljfL5qa5Y

[@tehgankerer]

What's the difference between MUX and MERGE?

[@shanali2121]

great explanation sir :) ALLAH tala bless you

[@nafbondebela5326]

how to convert matric(20X20) into source code in matlab?

[@pambedkar93]

Nice explanation and thanks sir

[@arthurthepenier6847]

Excellent introduction thank you very much.

[@rayumatube1221]

thank you for this tutorial . could you help me for final ECE project please?

[@Setiawan-]

i study matlab, simulink, toolbox, etc in signal system since 2003. Aftter almost 17 years, i still don't understand what for

[@rahandrafiq9895]

Best teacher in the world

[@copycarvers]

Hi sir can we generate and Transmit signal from Matlab using USRP B210m

[@wawarazak1501]

veryyyyyyyyyyy superb lecture!!!!!!!

[@stanislasrandrianasolo3409]

Hello, i need a matlab simulation of the solar home oven.

[@moustafarefaat6155]

can input instead of sin wave can it be coordinates ? i mean in if conditions ?

[@danielwang977]

It gives me an error message when I try to set the constant block value to ‘X’. I tried defining X as a variable in Simulink but that didn’t work either. Any suggestions?

[@apoorvranjan3353]

Hi danielwang, This problem is occurring because you are trying to provide 'X ' value to the constant block directly into the Simulink. First create a variable X in the script then save and run it and then try to assign X in the simulimk constant, It will definitely work. Thankyou.

[@adisaolayinka9832]

i was excited for having the opportunity to watch this video. please i will like to also join/watch/ be part of your future work. once again, thank you very much for this great video.

[@indhulekhajayachandran2936]

Can anyone pls tell the commands used in project 2

[@haydergfg6702]

Mr i have problem when working simulink delay time how solve this issue

[@navaneen7891]

If no need of Power GUI Block ?

[@jeanmwizerwa6822]

interesting videos, i decided now to study matlabs for using your videos

[@mloop9451]

can we generate a solid shaft and carry on with simulation test on shaft