How to Repaste and Clean the XBOX One Original 1540 Step by Step 🧹

[@thomasthetrain3942]

Cool…I always liked the original Xbox One design…

[@uFixTek]

yes they had a good design and a better components on board, compare to the next gen. cheers🍻

[@Lando00100]

What i love about that heatsink is the screws. They used the same clamp in the O.G. 360 and it would warp and over heat so the diy solution was washer and screw kit lol. I feel validated for using the diy method back then now. Theres a few youtubers that have judged me for it. Lol This video has mad me feel more comfortable now to dive into a X One thx.

[@uFixTek]

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your situation, just open and clean and use a good quality thermal paste like: thermal grizzly kryonaut: amzn.to/3Qs7ufv no need for washers on any of the xbox one series, that washer was for the xbox 360 only because of horrible heatsink that they had and a bad fan system and bad fan curve. here only repaste with good quality paste and you set to go. Should you have any further questions or requests in the future, please don't hesitate to ask me. This is an Amazon affiliate, when you use my links, I earn a percentage, which helps support the channel🙏.

[@ronaldhenson3379]

Thanks your video helped me clean my original xbox one i cleaned so much dust off the motherboard the cooling fan and heat sink now my original xbox one works excellent

[@uFixTek]

It's truly a pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both! Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

[@aktiveXkontrol_gaming]

Maybe blow the dust on the heatsink as well

[@uFixTek]

yes you can take the entire heatsink out remove the fan and even wash it with soup and leave it to dry🫠 just blowing air is fine, in my humble opinion.

[@aktiveXkontrol_gaming]

❤ Thanks mate

[@uFixTek]

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

[@pencarikeadilan5571]

you are amazing, thank you for the video,

[@uFixTek]

It's my pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both! Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

[@pedrogalloza3363]

Great I will do the same to My Console, Just bought It and is more dust than the one in the video wao.. Great Job and video.

[@uFixTek]

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P Should you have any questions or requests in the future, please don't hesitate to ask me. cheers🍻

[@manicbanana]

doing this i broke a component off the top of the cpu any way to fix ? i cant seem to find my specific motherboard i also cant seem to find a way to replace just the cpu

[@manicbanana]

ah they are caps on top of the cpu yeah i broke one of those off

[@uFixTek]

much appreciate the support, you need to get an CPU or board from ebay dead board and you will need a heatgun and flux to be able to replace the Caps, i recommend you to take to repair shop and tell them how much they charge to replace the caps it should not cost more than 20usd. Should you have any further questions or requests in the future, please don't hesitate to ask me. cheers🍻

[@mobtae7825]

Good work

[@uFixTek]

You are welcome! Glad that it helped you 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.

[@MahdiShraim]

Many thanks 👍

[@uFixTek]

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P Should you have any further questions or requests in the future, please don't hesitate to ask me.

[@MahdiShraim]

@@uFixTek Thank you very much , I want to ask you about the power supply of the x-box , which I changed a capacitor in but I did not found the same capacitor so,I put a capacitor that has the same voltage but a big capacitance then I plugged the power supply to the x-box and it run all good but after a minute the device shout down ! Does that capacitor is the reason ??

[@uFixTek]

i would need to see a picture of the capacitor old one and the new one and the inside of the charger, but its not because you place a bigger capacitance (depending how big), i have made few videos on those, kzbin.info/www/bejne/iWK1o6eplryarpo kzbin.info/www/bejne/m2mai4d4h9dprM0 note, Microsoft always changes the inside of the chargers all the time so yours my always be different.

[@MahdiShraim]

@@uFixTek Really thanks , you deserve like 👍 and subs 🌺

[@uFixTek]

much appreciate it .🍻

[@ronaldhenson3379]

I cleaned fixed inspected refurbished repaired restored reapplied new thermal paste on the central processing unit and graphics processing unit i used 9 q tips to clean the motherboard the cooling fan and heat sink and my original xbox one works excellent i own a original nintendo entertainment system super Nintendo entertainment system Nintendo super famicom nintendo game cube dol-001 original microsoft xbox original microsoft xbox 360 and the original xbox one and they all work excellent i use 91 percent rubbing alcohol and q tips to remove all dust off the top and bottom of the system shell

[@uFixTek]

Great Job my friend and awesome setup, and much appreciate the comment 🫠 🍻cheers

[@ronaldhenson3379]

Most importantly when cleaning the xbox one the motherboard the cooling fan the heat sink reapply fresh thermal paste on the central processing unit graphics processing unit and clean all the dust off the system shell

[@uFixTek]

yes as i have shown in the video applying a fresh thermal paste is a good idea 🫠👍 cheers🍻