ULTIMATE DIY STARLIGHT HEADLINER GUIDE!

[@CebalBRZ]

I have to admit, this is one of the best if not the best guides on how to do it. Thanks!

[@naurtix202]

I always thought the black roof liner was the go for this project but now...now I want this

[@drewsgarage4202]

Black hides the holes in the daylight better, but it looks good with any color!

[@Rbdlr]

@@drewsgarage4202 what holes? do you a photo?

[@Maly-Mal954]

Yeah real talk I was telling myself for the past two days I need to paint mines black but after looking at this video it actually looks nice with the tan also…great vid💪🏽

[@famouslyfamous433]

I have just installed one in my f250 this weekend easy

[@christiansuggs6495]

@@Rbdlr the holes placed for the starlight kit you can see the needles on the lighter color roofs

[@procrastinatingrn3936]

dunno if it’s the video, but man it looks professional and super good, well done

[@TaterAvila]

I wasn't sure how these worked. I guess I just assumed it was a projection...it looks good but you saved me a nasty surprise finding out all the fabrication it takes to install it.

[@Joe_Blo]

I'd have walked away half crazy after tediously poking through 187 holes, grabbed my .410, and shot the rest from 20 ft away. Then paid an out of work bud trimmer to install, glue & cut the strands. Honestly, I can't do tedious stuff like that. My hard off to you. Nice job.

[@drewsgarage4202]

Hahahaha, thank you

[@jimmyblankenship5774]

I’m literally watching this video being like, “This is a super cool thing to do, but is it worth all the time and my sanity?”

[@isco5232]

Smoke a blunt and get to work

[@CrowJamz]

@@isco5232 BOOM

[@ImaLoneWolfintheWoods]

​@@isco5232 im doing this right about now, 750 strands. So a blunt or three sounds good lol

[@demarcusdontavious4377]

bro didnt link any of the stuff he bought in the desc

[@procrastinatingrn3936]

Just search it yourself. You’ll find like personally

[@AutosportMore]

​@@procrastinatingrn3936can u provide us a link. There are so many

[@AidanLynch208]

⁠@@procrastinatingrn3936”you’ll find like personally”

[@AidanLynch208]

⁠@@procrastinatingrn3936”you’ll find like personally”

[@smoovkilla]

Its easy to find thats why

[@Cyprus.s]

How did you wire up the star light?

[@just.a.memoir]

Super helpful video🙏🏽 I’m planning on doing a 430 fiber starlight headliner on my single cab f350 soon

[@gangstalifers-4312]

Did u do it

[@freshbox6228]

I wish you would have shown where to put the motor etc

[@cmm4456]

Dude, I wish I had the patience 😂... I'd pay the kid to light my car up 🤘🏼

[@xxbladexx4471]

I was thinking of blacking out my head liner before doing this but it looks good

[@juniork1537]

That’s what I’m doing rn

[@imthdj2u]

your my new best friend lmao i have a 2018 mega cab and am going to do my headliner here soon ....its nice to have a video doing almost the exact same with moonroof...thanks

[@kylereynolds8694]

I got a 2006 Cadillac Escalade I think this would look amazing

[@JohnathanTimmons]

This looks amazing !!

[@Skyoneder]

dang the patience you have to accomplish this!

[@AnshYadav-ki9ph]

Any tips for wiring power supply from battery like should I use fuse or not and HOW!!! Liked the video it was really helpful, you make it look easy maybe I should try it.

[@FK7.Reuben]

How did you get the headliner out of the truck? looks awesome

[@chris1k_]

That’s what I’m tryna figure out Because it didn’t look like he took his seats out

[@rileykirkwood2153]

Did you have any issues with the sunroof getting in the way ?

[@MrAhkhan89]

Not sure about ram but my durango sunroof assembly is closed enclosure.

[@xandermosier8965]

It will make it slighter harder but if you know what your doing then it’s a walk in the park just very time consuming, starlights are very easy and simple you just must take your time and hold patience.

[@broncoupe]

Hi just fitting a starlight in my ML the headline material is quite spongy when cutting fibre optic strands do you press into lining and cut or just cut with no pressure

[@yamaguy]

How did you do it and do you like what you did?

[@Shakira_6.0]

Is there a method to the placement of all the star locations? I'm getting ready to do a 1500pc in my Crew cab super duty with a sunroof and i really don't want to have it lookin all weird

[@Urfavjon]

one question I bought a similar kit. where did you connect it? mines comes with a cigarette connector! but its all the way in the front and my understanding is you need to put the box on the back of your car?

[@jaxzenmask6330]

Hey man, I don’t know if I keep over looking it or what but what’s the brand of the fibers you used? I’d really like to put this in my truck as a summer project.

[@drewsgarage4202]

Azimom

[@randyfleming3004]

You did a great job but when it was all done I noticed some blank spots.. Like I say you did great but how might I avoid it looking a bit spotty or blank? Thank you so much and it does look wonderful.

[@KsantijusLTU]

Yea, i bought a car with this installed and sudently it stoped working, what kind of problem it could be? This morning they just stoped working. Night before everything worked fine, and i don't know where wiring is cause i have this car about 4-5days 😢

[@randykudijaroff482]

Super clean my guy! Great tutorial, you should do more vids.

[@Nfrealmusicfans]

Can you show how you wired it up and where the motor is

[@stirlingmoore]

I kind of like the strands of fiber optic wire hanging out

[@calebsta123]

How did you know where to put the light sources/ power them from the cars battery?

[@jo90007]

Pls share link to the tools, upholstery pin, Turkey pin and size of bit for drill

[@drkinetics384]

Was worried about how it would look with a sunroof, but thankfully it looks good still

[@jaxsongarrett6920]

Where did you run the module for the lights ? behide your seat ?

[@jakes5243]

Looks amazing 🥵 great job man🔥

[@drewsgarage4202]

Thanks man!

[@greebuh]

I'm doing this to my ISF next week.

[@TyFenwick]

That’s very cool bro 👍🏼👍🏼👍🏼 😮

[@imthdj2u]

1 more comment when removing the headliner since its a mega cab did u have to remove the seats to get it outta the door? Thanks

[@ericcervantes1879]

Hey bro i have a question, where do you put the bulky module after you put the liner back in? It seems pretty straightforward but thats the only park i dont really know

[@Nodnarb69]

You can put it wherever you want. For me im putting it in the trunk but i see people putting it behind their backseats

[@nathantorrey9731]

Hey man! I’m in the process of doing mine. Where did you wire the engine to? Thanks!

[@drewsgarage4202]

Routed it behind the rear seat

[@camberlyn]

How did you get the variety of sizes with the brightness of stars?

[@jonathanocampo2144]

What’s the easiest way to pull it out and putting back in ? Does it have to bend a little ?

[@fridmehdiyev7728]

It has a blackbox for lights. where did you put that blackbox ?

[@tyhilton8126]

Does the sunroof get in way of wires when opening

[@daymianhayes2493]

Why didn't you do the sunroof cover too? Ive seen it done before and wondered how tf they did it

[@mikea8927]

What brand of starlights did you use??

[@imAleSso]

Can u do a video about wiring ?

[@ceddthakid9732]

how did you get the white to twinkle? have the same set up 😊

[@samthomas2039]

Dude great job!!!

[@AprilGarcia-s8q]

What kit did you use and where did you wire it?

[@TuckerDeming]

How did you get it out bc I texted Zach and he said you pulled it thru the passenger door but we tried that in mine and can’t figure out how you managed that

[@mrice7143]

Hey what’s the name of the light system you installed??

[@thatblackram]

So dope bro good work 🔥

[@drewsgarage4202]

Thank you!!

[@njoyafabrice9371]

Hey man can you do a video of how you power the lights in the car?

[@additivealex4566]

Buy an "add a fuse" plug for your fuse box. Attach the negative wire to a metal bolt on the chassis to ground the system and crimp the positive wire onto the add a fuse. Insert the original fuse in one slot and put a new fuse in the second slot.

[@christurrisi3726]

Do you know if its possible to do a panoramic roof cover? or would you have go around the cover?

[@pandap4ntz]

This is so cool, can't believe I've never seen this before until today.

[@jayilla28]

Do you cut the strands a little proud of the headliner?

[@Ajaxy]

how close to the headliner should i be cutting the strands?

[@kanyeeast5835]

so did you go 50/50 on the diffrent size holes

[@gabventure2039]

that's amazing to look at.

[@L3viR3nfro3]

Hey man looks awesome but do you have to route the main light source to your battery or how does it work

[@drewsgarage4202]

Thank you. It is powered through a fuse tap.

[@jaegrado4561]

@@drewsgarage4202 hey man, i’m doing mine here in the next week but i’m not familiar with how to fuse tap, if you could help me out

[@reggieruss7328]

Did you put stars under the visors?

[@danielhavelka3180]

how do you get the headliner out w/ a 4 door?

[@尻に挟まりフォーエバー]

From 🇯🇵 how did you get source of electricity buttery or cigar socket?

[@mc_studios]

Where did you plug the power in the car... I guess its not on the lighter?

[@mcmobski1657]

Sick bro ! Where did you connect for power ?

[@AroTheWolf]

I got stars on the roof o mah cah! 🎶

[@apitochelli]

Id like to know how well its been working after 2 years

[@jacobpiccolo3766]

Hey man where did you buy the starlight kit at ?

[@aaronrenfro2573]

Also how many watts does your light kit output?

[@Overstand_Thinking]

Can you put these in a 300 srt since it has the Full moon/panaramic roof that slides all the way back in the middle?? If so where can i find it anyone

[@shadowking1006]

Great job

[@straatdiplomaat]

Can you send me the amazone link for the pins please? and what sizes did you buy?

[@Dan-jq7br]

Where did you hide the box? And how did you wire it in?

[@Davex47]

Thats what no one talks about

[@KingKhan-pp7kq]

Can you please provide me the link of the tool you used to cut the excessive stars in the end? I want them to be cut right by the edge I saw you used a plyer but i need the exact size and same amount of tilt to cut exactly from the edge of the headliner. Thanks !

[@Turbo_96]

Knipex Electronic super knips is what I used, it cuts flush to the headliner

[@KingKhan-pp7kq]

@@Turbo_96 and how do you clean the suede after cutting? I see the left over cloth in the suede after doing my headliner. Can u please send me the link or name of that brush u wipe the headliner from?

[@BellaB_Bomb]

Where’s the link to the starlight kit you used???

[@GarrettBellingar]

Hey man just wondering how do you get them to twinkle like that I have a set just don’t know how

[@arif2587]

Some starlight kits don’t have the twinkle motor, if your one does have it you can find the twinkle mode on your led app

[@mjc1177]

love it great job

[@sebastiannieroda4834]

Where does the project that makes the light go?

[@cameronlafek8596]

Hey bud just confused as to which brand you're actually using. I saw you comment Azimom on one reply and then customs unlimited on another reply. Im guessing its Azimom as the customs site does not have a 860 piece set just azimom does, thanks!

[@mattschamel6550]

It's been 2 years. How's the generator holding up?

[@Mena6e.c7]

Where do you power it to and put the light engine

[@MarriedTooTheMiles]

Well done!!!

[@johnsn10]

How do you get the headliner out of the truck do you need to remove all the seats?

[@SwervooShiestyYt]

Where does the box go n how does it stay lit up .?

[@MIGUEL-go8ek]

Can you use the original headliner?

[@bencorolla444]

To poke the holes you used the upholstery pins but i cant find any that are .75 mm

[@bryanparmentier1611]

How did he get the headliner out of the cab

[@richardharris5738]

Aye so when hiding the receiver, does it affect the signal from the remote?

[@VenkiCodes]

I'm from India, and some products are not available here.. can you suggest a better one similar to yours that is available in India?

[@highclass-noted4876]

How did u hook up the power?

[@xviperrr1706]

how did u pull it out of the truck ?

[@coreybrito9963]

you cant do the sunroof too??

[@blackbird1543]

Will 120 degree summer heat damage this?

[@franciscomandujano707]

Where did you put the projector?

[@ashleyjohnson4612]

Do you live in the southern states? I'm wondering how the fiber optics hold up to the alabama heat. I just installed this kit on my truck and I'm worried that the metal on my roof will melt the plastic stands.

[@348frank348]

i heard of this too, you can add insulation to the roof of your car like 1/3 of an inch thick

[@UccelloLibero86]

​@@348frank348 a pad or spray?

[@uno3863]

That looks fuckin amazing!!! If were to charge someone to do this how much would it cost to do their headliner? Great job 👍🏽

[@Leexlyisaz34]

Se necesita una batería aparte para estas luces o donde se conectan?

[@yedi015]

Where did you wire it to

[@allannunez7869]

Can you give me the information to buy the same lights bro?

[@joel117-cge]

Beautiful

[@ryanpressman6973]

how did you actually get the headliner out ?

[@Miamike-zl5nr]

How do yu hook up to battery