Ultimate Table Saw Workbench

Full video of the build available now!
• How to Make a Workbenc...
I'm not a carpenter, but I do love to build things. The lumber list is included below with links to buy directly from Home Depot. In addition, you'll need some caster wheels and a few other odds and ends if you want to replicate what I did.
1 - 3/4 4ft x 8ft Birch Top - homedepot.sjv....
2 - 2 in. x 6 in. x 8 ft. #2 Prime - homedepot.sjv....
3 - 4x4x8 Pressure Treated - homedepot.sjv....
13 - 2 in. x 4 in. x 8 ft. Prime Whitewood Stud - homedepot.sjv....
4 - 2x2x8 Furring Strips - homedepot.sjv....
9 - 1 in. x 6 in. x 8 ft. Ground Contact Pressure-Treated Board - homedepot.sjv....
5lbs of 2" construction screws - homedepot.sjv....
5lbs of 3" construction screws - homedepot.sjv....
1 box large head 3" construction screws for wheels - homedepot.sjv....
Dewalt 7485 8-1/4" Table Saw - homedepot.sjv....
Stacked 8 1/4 Dado Blade - homedepot.sjv....
Dewalt 4 battery charger - homedepot.sjv....
Drywall T Square - homedepot.sjv....
DeWalt 4.5" circular saw - homedepot.sjv....
DeWalt Jigsaw - homedepot.sjv....
DeWalt Random Orbit Sander - homedepot.sjv....
Klein Loose Cable Stapler - homedepot.sjv....
3/8" Roundover bit - homedepot.sjv....
DeWalt 12 compartment organizer - homedepot.sjv....
DeWalt Sawzall - homedepot.sjv....
Right Angle Corner Clamps - amzn.to/3p2g9KT
Automatic Vaccum Switch - amzn.to/3N5fQqL
6 foot Heavy Duty Power Strip - amzn.to/3AsZO47
Jarlink Heavy Duty Pencil Sharpener - amzn.to/3P7nljr
4" Caster Wheels (need 2 packs of 4) - amzn.to/3X3djln
Bluetti LifePO4 Battery - amzn.to/3X3J1PF

[@kichwatembo6551]

If only i had more room for a bench like this

[@southtexan1761]

The best table I've ever seen. Great job.

[@AndiWofford]

Thank you so much!

[@scottbionicnerf8727]

I like the jobsite saw with a built-in out feed table. The under-bench storage is cool. I think many of us have an idea or 2 of what we might do differently to gear it more toward our own tastes or needs.

[@agelualofa]

Magical table brother beautiful work

[@dsb227]

Nicely done!

[@katieanne1394]

The pencil sharpener is the genius part. Never seem to have a sharp pencil in the garage. If i had the space for a workbench like this. ❤

A bit unnecessary but very cool

[@ricardoarnau6453]

Thanks!

[@AndiWofford]

Wow! Thank you so much!

[@electricianron_New_Jersey]

Pretty awesome build.

[@jaked1902]

looks great but how does the guide adjust for the saw?

[@AndiWofford]

There's a full video posted showing how I modified the table so the fence could slide all the way in and out: kzbin.info/www/bejne/nHy5lmqupZh-nsk

[@finnthinkin7695]

Excellent work bence!

[@MrManAmong]

Clean 💯

[@954fireblade]

great tunes

[@AndiWofford]

Thanks

[@michaelscott9759]

You need to continue the miter slots into the bench for a miter gauge or crosscut sled

[@AndiWofford]

Certainly if you plan to use a sled or the miter gauge then you should make those cuts into the workbench.

[@R3AL9005]

Get rid of the music. Great bench

[@adamm2716]

no

[@AndiWofford]

This is just a KZbin short/overview. The full, music-free build video is here: kzbin.info/www/bejne/nHy5lmqupZh-nsksi=l3guxrT_6kYCCFKU

[@thelbronius]

Sharing your music taste is unnecessary. Mind your business.

[@samanthasaysmoon11]

this guy loves blackpink!!

@@adamm2716it hits!

[@carterscustomrods]

Youll want to cut a gap on left side of saw to allow fence arm to move to the left of the saw.

[@AndiWofford]

Already done. You can see it in the full video.

[@cristianjosedeoliveira3166]

😮 my god, top!!!! Congratulations 👏👏👏👏👏👏👏

[@AndiWofford]

Thank you!

[@ForgottenHero87]

Looks great. I am thinking of adding my table saw to a work table like that. How did you account for the fence sliders?

[@AndiWofford]

Cut them out in different ways; better explained in the full video on the build: kzbin.info/www/bejne/nHy5lmqupZh-nsk

[@ForgottenHero87]

Than you!@@AndiWofford

[@Patrick20w]

What adapter are you using for sawdust collection with the vaccuum. My rigid vac one doesnt fit.

[@AndiWofford]

Strange. Didn't need an adapter at all. Slides right on with no issues. Maybe sometime like this would work for you though: amzn.to/41F6lW6

[@vasilemuresan3893]

The sander has the best ❤😂😂😂😂😂

[@spencersnider5056]

Lol instead of casters throw some go cart wheels on 1 side and a basic turning system on the other so with out door work makes it even easier to move

[@Epro95]

Great build though

[@rioandi9228]

I hope one day i have this in my home 😅

[@AndiWofford]

I hope you do too!

[@davidyarb5885]

The pencil sharpener is an awesome feature at the table saw!

[@AndiWofford]

Thank you!

[@JohnDoe-bp7lu]

Sweet!

[@AndiWofford]

Thank you!

[@sma11caliber]

Not the dewalt tools with Milwaukee tape measurer great bench though

[@AndiWofford]

😂😂

[@rigobertoespinoza1685]

For real bro my boy tripping!

😂

[@paulnicholas00]

Any reason on why the table top sits higher the the saw itself ?

[@AndiWofford]

If you watch the full video you'll see that the table saw is just proud of the table surface

[@davincimen4495]

Super awesome minus the damn rap music. Lol.

[@davincimen4495]

Or whatever kind of music it be.

[@brandtfj]

I want to set a table saw table top that looked like an aircraft carrier The only problem was it took up a whole parking space in my garage That's the problem with making these types of tables is I've got no more room

[@nightman69]

Great bench other than it being 4 feet wide. Bit of a nuisance to have to walk around your table a bunch to get your tools or what not

[@AndiWofford]

That's the beautiful thing about building a bench to fit your own needs. You can make it as wide or as narrow as you want. Mine needed to be four foot wide so that I could do picture frames on it. Yours may not need to be as wide.

[@cruisepengilly6557]

Do you have a link to plans?

[@AndiWofford]

I should probably draw some up!

[@josealbertobejaranoulloa2280]

Money doesn't buy talents or skills.

[@philreap]

Nice bench but couldn't finish due to the music.

[@victorscasas1193]

what if you want to cut less than 5 inches?

[@AndiWofford]

Then you cut less than 5 inches 🤷🏼‍♀️

[@a-carpenter9229]

​@@AndiWoffordthere's no cutout on the left for the rack and pinion fence to move to get smaller cuts

[@AndiWofford]

I see what you're saying now. But if you watch the full video you can see the hole I cut inside the table. The cutout does not need to go through the surface because I'm not putting the fence on that side. However, the rack and pinion slides under the surface through the hole to allow the fence to collapse all the way to the blade.

[@1029zsz]

Looks great! Looks too new though, rub some dirt on it

[@AndiWofford]

😂😂😂, it's already getting dirty!

[@evanwickstrom7990]

All your tools gonna get dusty

[@riggyrain]

Solid bench for sure but sooo much empty and unutilized space under there. No built in storage just a handful of accessories screwed on? Add 2-3 drawers, a flat slide-out table extension for plans, docs, etc and most head-scratchingly... Add the missing router table that it desperately craves. Ultimate? No. Very solid basic beginner bench? A+ on that

[@adamm2716]

i like the kpop

[@SJtoobsox]

Stain it already

[@JaceCatonMusic]

perfect till you need to cut larger than 10 inches on the table saw

[@AndiWofford]

I've got no issues cutting wider than ten inches on the table saw 🤷🏼‍♀️

[@williammenor7290]

Maqlikqbujqn yang mga gamit mo, hindi puede diyan yan ..

[@jdthnt]

Stop using the trendy music.

[@Epro95]

Cancerous music

[@cenodavis]

Love the table but how’s the movement, like sturdy is it being on casters 🛞? But overall I’d build one good 👍🏽 job!!

[@AndiWofford]

It's better than I expected with the movement and being on the casters. I can lock em down when I need to and it stays put, but can easily roll it out of the way. Good luck with your project!

[@timmiller8495]

More of a “look what I did” then how to but excellent worl

[@AndiWofford]

How did you come up with anyone saying this was a "how to" for building an entire workbench like this. . .from a 60 second video? The full video is linked in the short and is over 30 minutes long: kzbin.info/www/bejne/nHy5lmqupZh-nsk

[@charlesrich4497]

Thanks!

[@AndiWofford]

Thank you so much! My first super thanks ever!!!