This is a upgrade I done to the Ultimate TV Antenna..Watch this video and find out how. Danny S Hodges.
Пікірлер: 58
@RayCarin6 жыл бұрын
Just finished my Ultimate Antenna and it works like a charm! Thanks for all the help. Taking it to Kentucky as reception there is poor.
@clarkss127 жыл бұрын
Been watching most of your antenna videos, thanks a lot for them. Been learning a lot.
@bobbykay91326 жыл бұрын
Thanks a lot Danny, needed some ideas before I started mine. Shout out from Canada brother !!
@fred3068016 жыл бұрын
Hey Danny, You used the Ryobi sander to put the flat spot on ends. When I tried this I ended up getting it off center. Just letting people know they need to watch what they are doing. In one of your other video you used a chop saw. An they came out looking perfect. So that is what I did. And you are SO right about the PVC glue. It will set up in a heart beat. So make sure you got it where it needs to be.
@bobclarie4 жыл бұрын
Thanks for your great videos.
@kjaxky7 жыл бұрын
once I watched the other videos it all came together. great videos Danny. thx
@DannySHodges7 жыл бұрын
TKS
@whatwasithinking81596 жыл бұрын
Thx for the videos!! What do you use for the center beam of the antenna??
@jdnewsome12477 жыл бұрын
Thanks Danny, you sure come up with some good idea's ! I wanted to let you know something too, I hope it is not messing up the reports you are looking at. Sometimes I go back looking for info on something I remember you showing in a video and I'll watch a video part way then jump over to another one part way through or find what I wanted and quite watching. I looked for your Facebook page, ain't found it yet. I had something I wanted to ask you about building antenna's. But don't want to post it on the KZbin video.
@DannySHodges7 жыл бұрын
lol here it is, facebook.com/profile.php?id=100009144521264
@sneakycamper20996 жыл бұрын
Good video Very talented too ! Is there a way to get More Signal from a homemade antenna ????
@bikemannc7 жыл бұрын
can you Please do a parts list & include that Non-stop Pvc glu u talked of but didn't state what it is
@scottthompson14267 жыл бұрын
😀 cool antenna
@DannySHodges7 жыл бұрын
tks
@jthonn7 жыл бұрын
Thanks Danny, I knew you would make one with all PVC eventually. I like the fact that you don't have wood or extra metal to deal with. Screw the reflector on the back and you are set! If I build another one, that is how I will do it. I may do some modifications, they make the hinges like for lawn furniture, and 4 way fittings so I may build the double one using those and make a way to secure it in the direction that is needed. BTW, I am still wondering what your patent is for, and also curious how the Hoverman vs the Ultimate will turn out. My money is on the ultimate!
@DannySHodges7 жыл бұрын
oh yeah...lol
@kjaxky7 жыл бұрын
I'm curious about the signal strengths too, is there any chance you could build a antenna carrosel or merry-go-round so that multiple antennas can be mounted and rotated to be at the exact same spot, quickly tested and signal strength measured with a digital meter or spectrum anylizer. that way there's no deviation in distance height or Latitude from. each antenna in exactly the same spot.
@crazy-horsecrazyhorse85435 жыл бұрын
Kal Jak, I too have inquired if Danny S Hodges will make or has made an Omni-Directional’ Ultimate Antenna,’ so I believe what you were thinking and the word your should have used is Omni directional. That would receive Digital TV Station signals from 360 degrees. 👍
@scottythompson9406 жыл бұрын
did the ulimate antenna work good and how many channels did you get in your area danny
@harveykortman5 жыл бұрын
Ahhh, Dublin. I figured you were south of Macon, the GA clay shit I see all day long, up by Athens
@melissabinary81007 жыл бұрын
awesome!
@DannySHodges7 жыл бұрын
thank you
@paulevans43346 жыл бұрын
How do you connect it to the tv wire ?
@midwestfishing91536 жыл бұрын
Danny Have you heard about ATSC 3.0 coming out?
@Cowboysgizmo7 жыл бұрын
do you have a parts list to make 8 bay
@austincain21735 жыл бұрын
I just got on here to let you know from 65 miles away I get a signal strength of 3 to 5 out of 5 on my uhf stations. I don't get any vhf stations though. Is it because I don't have a reflector?
@fred3068016 жыл бұрын
Hey Danny, You need to read this ! @0.25 You are talking about the different sized pipes. 3/4 thin wall and then sliding the 1/2 thick wall into it. The reason to do this is to give the screw something to hold on to, right ? This is where the wiskers go. Every place I went today only had thick wall PVC pipe. So thats what I got. I took the 1/2 thick wall pipe and cut a slit down the side on the table saw. I had to make two passes, once was not enough. Took some plyers and squeezed it and slid it into the the 3/4 stuff. Then took a hammer an slowly tapped it down. It was a tight fit but it worked. This should give the screw more to bite into.
@DannySHodges6 жыл бұрын
RIGHT
@thomasc.pellicer18797 жыл бұрын
Thanks Danny i was thing on making mine out of pvc pipe .
@DannySHodges7 жыл бұрын
its better for yall...what use i have to buy alot at 1 time
@mikerobinson31565 жыл бұрын
Right on
@jvhende647 жыл бұрын
Danny, what gage copper wire are you using?
@dcsuperman317 жыл бұрын
hey Danny what size wire you using 10 12 8 ?
@KevinBragdon7 жыл бұрын
Nice porch!
@DannySHodges7 жыл бұрын
thank you..i have more drums on my facebook...Danny S Hodges
@omni19517 жыл бұрын
Hi danny, This new antenna your building with the window framing as the reflector should give you a little more forward gain. I am a ham radio operator and build wire antennas.
@DannySHodges7 жыл бұрын
yeah it works good
@kjaxky7 жыл бұрын
good job watched video out of order so confusing. good to see someone using proper tools and measurements. way too many youtubers jerry rigging with cheap hand tools
@DannySHodges7 жыл бұрын
ITS A MESS AINT IT LOL
@fred3068016 жыл бұрын
Hey Danny, At the end of this video you put the 1/2 pipe into the middle of the 3/4 pipes you just put together is that just for strength ? You were using the thin wall stuff. Please read my last post. So far all I have used is thick wall pipe.
@DannySHodges6 жыл бұрын
FOR strength
@sugobamv29477 жыл бұрын
Love the accent..... : >)
@DannySHodges7 жыл бұрын
TKS
@flakitoc26057 жыл бұрын
hi Danny nice videos .u have a video how to make long range antenna ?
@DannySHodges7 жыл бұрын
yeah
@flakitoc26057 жыл бұрын
Danny S Hodges send me a link please
@KevinBragdon7 жыл бұрын
More drumming!
@sightseer20117 жыл бұрын
Question. Will a digital tv work in a country that uses analog?
@DannySHodges7 жыл бұрын
YEAH
@jamesdavenport48227 жыл бұрын
does it matter if the reflector wire is coated ? I have powder coated wire.
@DannySHodges7 жыл бұрын
PROBALLY OK
@jamesdavenport48227 жыл бұрын
Thanks Danny, really enjoy your videos
@bjmain19477 жыл бұрын
James Davenport )l)p l p) l lop p)
@fred3068016 жыл бұрын
The ads and commercials were longer than his video.
@Z71Ranger6 жыл бұрын
I didn't see any ads or commercials on this video... Or any videos on KZbin...