Ultra Cool w/ FLO Oil Filter Install

[@carlbruhn1772]

I stumbled across this video while researching ultracool fans. Very well done video.

[@bigherk80]

Appreciate that! Definitely worth it in my opinion. Also have it paired with there Flo oil filter that helps reduce heat by itself and is reusable. Thanks for watching and commenting!

[@christopher2399]

Nice job... I'm glad you didn't take any short cuts to make it look professional.

[@bigherk80]

Thanks for watching, and I appreciate the comment.

[@roadkill8900]

Excellent video thank you so much! Just made my life easier

[@bigherk80]

Glad it helped! Thanks for watching!

[@bangbangbikergang5052]

Dude, you killed it! Great video. You showed everyting and explained it well. I hope I can do it as well as you. I'm subbing up. Cheers

[@bigherk80]

Appreciate it. Thanks for watching and the sub!

[@jackscaliajr6452]

Excellent video sir!👍🏻

[@bigherk80]

Appreciate it. Thanks for watching

[@NickyRaff]

Installing mine tomorrow, great vid brotha I feel a little more confident now haha

[@bigherk80]

Thanks for watching, you got this, just take your time.

[@andrescott534]

solid install and great job doing it yourself.

[@bigherk80]

Appreciate that, thanks for watching

[@ericroadking7564]

Great work brother!!!!!!!!!!

[@bigherk80]

Appreciate it. Thanks for watching

[@acc6424]

Brother! I didn’t know you had a channel! Just subscribed! Excellent video!

[@bigherk80]

Awesome! Thank you for watching and for subscribing.

[@warrickroper4357]

Great job you save yourself a lot of money.

[@bigherk80]

You got that right! The way I look at it, is if I try and succeed not only have I saved money but learned in the process also, and then I can share and hopefully give someone the confidence to try themselves also. Thanks for watching and commenting!

[@guyconnell2250]

Informative video.Thanks. By the way, you don't have to remove the dash to take the tank off.

[@bigherk80]

Appreciate it. I’ve always took dash off, next time I have to removed tank I’ll try it without removing dash. Thanks for watching.

[@gerry6310]

Talked with Ultra Cool and and they advised me to purchase the below regulator cooler. Not sure if that is the correct unit as I have a factory oil cooler and lowers just like you. Hope they clear this up for me.

[@bigherk80]

If you gave them your correct motorcycle and with lowers they will get you what you need. Hope it works for you. Love mine. Thanks for watching.

[@Rider_2013_]

I have one on my 2013 110". Love it!

[@bigherk80]

Love mine also. Thanks for watching

[@gerry6310]

Great video, love the way you took your time. Does the fan blow heat on your leg? How hard is it to remove the oil filter now with the cooler and lines in place. Thanks

[@bigherk80]

Appreciate it. Haven’t noticed my leg being any hotter with the fans running. Haven’t changed oil yet but don’t expect it to be an issue. Thanks for watching.

[@lancmac]

Good job... Excellent how to video...

[@bigherk80]

Appreciate it. Thanks for watching

[@kellybgliding]

Dude nice job. I’m bringing my bike to you. My fan came in when I was in Milwaukee 😂 . Let me know when you’re ready lol

[@bigherk80]

Appreciate it. I stay ready. Lol

[@joshwagner8954]

First off, great video.... secondly a probably dumb question but here goes....once you have adapters on for the oil filtet does it just easily screw in and out?

[@bigherk80]

Thanks for watching. First I’ll say there’s no such thing as a dumb question. The oil filter seems to screw on and off easy. Does that answer your question?

[@joshwagner8954]

@@bigherk80 yes thank you

[@bobbysbackyard1781]

Where did you get the magnetic box? That’s a must have!

[@bigherk80]

Think harbor freight. Have two different sizes. Thanks for watching.

[@bobbysbackyard1781]

@@bigherk80 roger that👍🏾👍🏾👍🏾

[@bobbysbackyard1781]

@@bigherk80 no problem. Us Tennessee boys have to stick together lol.

[@SilverbackSS04]

Great video bro. Kelly B sent me your way. I gotta get this on my RGS before I move to Las Vegas from Colorado.

[@bigherk80]

Awesome thank you! A must for anybody that rides in hot climate or stop and go traffic. Kelly B good people. Thanks for watching!

[@toddfranklin63]

Dude! I moved to Vegas from Ohio, 4 months ago. Sitting here prepping to order this thing for my 2010 Road Glide. Pretty sure it's a necessity out here if you really want to ride... I love it here, just wish I had more time to ride! The freeways here are killing machines, I avoid them as much as possible. Ride safe!

[@d-dotjohnson7596]

Well done 👍

[@bigherk80]

Appreciate it. Thanks for watching!

[@hampdentime]

Nice job, I just came across the video , looking to add a cooler to my trike. How well do you like it now that it is 8 months later? Thanks

[@bigherk80]

Love it! When in Daytona I put the jumper that it came with in that continually keeps the fans running. A must have in my opinion for any motorcycle but especially for built motors. Thanks for watching!

[@mattkeeler5111]

Great detail bro! I'm about to pull the trigger on one of these. Living in South Florida with a built 128, I'm like you in that I've had to shut my bike down a few times because of the heat. I have a thunder max oil cooler fan but it just isn't enough. Since you've installed the UC, how has the heat been? Do you notice a change?

[@bigherk80]

Appreciate that. Yes I’ve noticed a change, and l’m very happy with the kit. Fans kick on as they should because I got stuck in traffic on different occasions since install and they kicked on both times. Haven’t put a temp gun to verify but again I’m happy with kit.

[@wallywire]

Just watched your install. How is ultra cool holding up? Did it drop oil temp 30 degrees like it said??

[@bigherk80]

Love it and no complaints. Have a friend with dakota digital gauges with a readout for temp. We have same setup and while in Daytona with the jumper to keep the fans running temps hovered around 185-190. Thanks for watching and commenting!

[@robertpronovost3839]

Sort of off topic but is that a Boom box and you added a amp? My Doom box don’t get any channels. And I live near Springfield Ma. Spotify works great any way.

[@bigherk80]

Yes I added an amp to the factory GPS. Hope that answers your question? Thanks for watching.

[@TheBlueBikeDoyle]

nice so hows it working for you now

[@bigherk80]

Love it and no complaints so far! Helps keeping my 124” motor temp down especially in stop and go traffic! Thanks for watching and commenting!

[@TheBlueBikeDoyle]

@bigherk80 nice I see on the web site they have cleaner design now.

[@ivanhoward3273]

What up BigHerk. Will this work for the twin cooled m8's

[@bigherk80]

Don’t know for sure. Give them a call and they can help you out. Thanks for watching and commenting!

[@ivanhoward3273]

@@bigherk80 yessir. C U at Run to the Hills Big Dawg

[@MrHammGutsnGlory]

Did you have to drain the oil before removing the oil filter?

[@bigherk80]

Didn’t have to, I put a rag under the filter before removing to catch what was in the filter. Hope that helps. Thanks for watching for watching and commenting!

[@chuck-l2r]

just having trouble with the wiring on 2017 Heritage,,,every harley is different it seems

[@bigherk80]

Can’t speak on the heritage. Give ultra cool a call they were very helpful when it came to mine.

[@kevinhogan715]

Getting ready to install one on my 2006 Heritage Softail.

[@bigherk80]

You’ll love it. Thanks for watching

[@kevinhogan715]

Already got love juggs on her they work pretty well.

[@CharlesJrSmith]

Where did you put the gasket on at

[@bigherk80]

Gasket for filter? If so put around edge of filter before you place filter on like normal. This filter has replaceable gaskets since it’s reusable. Thanks for watching.

[@CharlesJrSmith]

@bigherk80 thanks I'm going to see if ultra cool has one for my 06 ultra classic

[@MrDiasychain]

You skipped the most critical step, actually trimming and cutting the fairing 😢 this is what I was watching for, to get any tips.

[@bigherk80]

I used a jig saw with a regular blade. Taped it off where I was going to cut, cut it then test fitted. Had to trim a couple times to get where I wanted. Take your time, it’s better to not cut enough because you can always trim or cut again. Can’t put back after it’s gone if you cut too much the first time. Again take your time! Thanks for watching and commenting!

[@MrDiasychain]

@@bigherk80 thanks, I've completed mine now. I used the method shown by ultra cool (razor knife). The ambient air temp was around 92F, (i live on the equator) after riding an hour or so and then getting back into town traffic the led/fan kicked in. I installed a Flo filter as well so think that was helping keep it under the trigger temp.

[@easyglider1307]

I feel like you have the cooler upside down. Maybe my imagination

[@bigherk80]

Thanks for watching but it’s right side up, unless the directions is wrong they sent me.

[@easyglider1307]

@@bigherk80 Reason I say is because other installs I've seen, the plug wire is down and people run the wire to the bottom of the frame, and it makes routing the oil lines a straight shot instead of bending them to match up with the ports on the engine case. But what do I know.....LOL

[@bigherk80]

@@easyglider1307I’ve seen them that way also but those didn’t have lower fairings, so maybe that’s the difference.