Ultrasonic Cleaning for Gameboy Motherboards Buttons, Membranes and Shells 2023

Gamers,
In this video, I will be demonstrating how to install clean gameboy shells, membranes, buttons, motherboards with a ultra sonic cleaner. Ultrasonic cleaners are a great method to quickly and simply clean your old gross gameboy components and is a great way to learn a powerful cleaning method that you can use for things around your house!
Any questions? Feel free to joint my discord server! / discord
Want a build but dont want to build it yourself! I have you covered at pizzahandhelds.com
****************************************************
Amazon Affliliate Links:
Vevor Ultrasonic Cleaner 3L: amzn.to/43qXtDm
Simple Green Detergent: amzn.to/45IyJIE
PCB Ultrasonic Cleaning Detergent: www.digikey.com/en/products/d...
****************************************************
Recommended Soldering Equipment:
10% OFF - Pinecil Soldering Iron: handheldlegend.com/pizzahandh...
10% OFF - Pinecil Soldering Iron Tips: handheldlegend.com/pizzahandh...
10% OFF - Pinecil Silicone heat resistant USBC Cable: handheldlegend.com/pizzahandh...
10% OFF - handheldlegend.com/pizzahandh...
10% OFF - Brass Wire Solder Iron Cleaner: handheldlegend.com/pizzahandh...
10% OFF - Solder: handheldlegend.com/pizzahandh...
10% OFF - Solder Flux: handheldlegend.com/pizzahandh...
iFixit Mako Everybit Driver Kit: amzn.to/3MZtg7o
****************************************************
Save $$$ on Retro Console Modding Supplies:
10% OFF - ExtremeRate Gaming Mod Supplies: extremerate.com?sca_ref=3798758.sEpKUgjCu3
5% OFF - HandheldLegends Gameboy Mod Supplies: handheldlegend.com/pizzahandhelds
Purchase Completed Modded Gameboy Consoles made here on the channel here: www.etsy.com/shop/pizzahandhelds
****************************************************
Timestamps
0:00 Intro
0:21 Ultra Sonic Cleaning Overview
3:05 Gameboy Shell Demonstration
4:10 Ultra Sonic Cleaning PCB Overview
6:02 PCB Cleaning Demonstration
****************************************************
Affiliate Disclosure: I get a small percentage of each sale that uses an affiliate link or coupon code. It’s a great way to help SUPPORT my channel at no cost to you so I can continue to make these videos for all of you, everyone wins! And as always, thank you for your continued support of my channel!
Disclaimer: This video is only for entertainment purposes. Any injury, damage, or loss that may result from improper use of tools, equipment, or from the information in this video is the sole responsibility of the viewer and is to be used at the discretion of the end user/viewer and not Pizza Handhelds. If you are uncertain about any step of the process or feel unsure about your skill level, seek a more authoritative source.
****************************************************
FOLLOW me on my other social media accounts:
Instagram:
/ pizzahandhe. .
Twitter:
/ pizzahandhelds
TikTok:
/ pizzahandhelds
-Dan

[@VD-cc4hx]

i was trying to look for a video like this. i had to scroll past at least 200 videos to find this. just letting you know.

[@PizzaHandhelds]

Thanks for watching! Hope you learned something as I have putting this video toegether and have a nice day!!

[@MarieZh]

I’ve never seen such a thing before 😮. Thanks for sharing!

[@PizzaHandhelds]

Yw thanks for watching ur my number 1 fan and I appreciate it :3

[@RGmodsitalia]

I usually put my game boy mobos in my 10 lt ultrasonic cleaner after desoldering speakers and quartz oscillators(heard that the 40hz frequency could destroy them). I saw you put them without desoldering anything (this will spare me some time), have you experienced problems or issue when yhe mobos were dried and in operable mode?

[@VD-cc4hx]

1:30 Louis Rossman says to angle it sideways instead of flat so it can clean under the bga and smd chips. idk what the right way is.

[@olDirdey]

think about whether a ultra sonic cleaner makes sense if you have to use the brush afterwards anyway

[@PizzaHandhelds]

True if it’s an ez solder job brush and ipa all day. It’s it while board dirtiness or u soldered a mgbc it’s really effective. And part of it is it feels good to get it really clean!

[@newenglandhustler8200]

How do you measure the amount of distilled water and solution that you put in the cleaner? Just want to make sure I don’t do too much distilled water for the PCBs.

[@PizzaHandhelds]

u could use a measuring cup - but I think its suitable to eyeball it. submerging the pcb in pure distilled water is not damaging either so there is no concern there.

[@newenglandhustler8200]

@@PizzaHandhelds great information. Thanks for getting back to me so fast.

[@JohnShortall88]

How can you reduce the chances of the Ultrasonic cleaner cracking the Gameboy shell? Are there ideal conditions to reduce this? Thanks!

[@PizzaHandhelds]

There’s a chance. But I haven’t heard of any or seen any degradation.