ultrasonic generator introduction (industrial grade)

[@onklim3132]

What is the maximum output of this device?

[@MatheusFerreira-fr1vk]

Helô, How to change the temperature value?make a video explaining

[@CristianoSantos-yy6dw]

Manual dele onde encontro?

[@cihankaraca1824]

hello, can I convert 10 units of 100w 28khz with this product? for ultrasonic washing machine?

[@Z-Ack]

Sounds like there are a lot of unknowns about the functions as well as errors that are being voiced by users..

[@abilaultrasonic]

Sir on my generator as soon as the power is turned on the indicator shows U-64, Then look for the frequency with automatic but in the end in error E-03. How to handle it?

[@sinosonics]

Replied you pravitely.

[@sunjeina]

Sir my generator utrasonik disply show E04 so buzer sound alarm What's that.. My problem there unit

[@sinosonics]

E04 means the generator can not tracing the work piece's frequency. 1# check if the screw is loosen. 2# check if the work piece fasten well, or balanced placed. 3# add my whatsApp: [phone], let me run a diagnose firstly.

[@sunjeina]

Mister if on disply show E-03 buzer on That is what Ido not

[@yanfengqin7106]

E03 error code: Fault description: the working frequency is lower than the set value of the machine. Fault cause: frequency deviation caused by loose or damage of mold. Troubleshooting: ① check whether the mold is loose. ② Check the mould for cracks.

[@mariuszk1782]

19,63...

[@sinosonics]

Thank you for the interest.