Umarex SPA 100, Tincan Shooting & Chrony Numbers

[@Batty2016]

Hi Rune..good job with this cheap plinker! Good for indoor shooting without ricochet..go on, greetings from Germany my friend..

[@runerebel8441]

Thank you my friend. Its a fun plinking pistol. Greetings from Norway

[@squirrelatwork]

Not too bad. In the US its branded as Umarex Markpoint. Produces 300Fps with lead pellets. Looks like it would be a great 10Meter target pistol for the price.

[@runerebel8441]

Thanks. Yes with some trigger polishing it might be a great target pistol 😃

[@lesslethalfordummies]

Fantastic! I really liked how the filming showed you as a dark silhouette.👤

[@runerebel8441]

Thank you Sean 😃🙏🙏👍

[@jamesferguson2353]

Nice piece of property with the view oh and nice video. good day sir

[@runerebel8441]

Thank you Sir 😃. Have a great day you also😃

[@thystruter6869]

Hello Rune! Thanks 👍

[@runerebel8441]

Hello my friend. Iam glad you like the video :)

[@Batty2016]

Hi dear Rune..good Job with this cheap Umarex. For some indoor plinking this thing is ok..especialy in cold days outside..Most of these plinkers have between 2 or 3 Joule which is enough...wish you fun! Greetings from Germany/ Black Forest..

[@runerebel8441]

@@Batty2016 Thank you my friend. Yes its ok for plinking and very fun to use. Take care and have a nice weekend. Greetings from Oslo, Norway 😃

[@kylestalilonis7262]

Another great video. I watch your videos every time I see a new one. Originally I watched because the content was cool. Now I watch because the content is cool and your demeanor and personality make me feel like I'm watching an old friend. By the way when you shoot sideways it's not just gangster style, its original gangster style! Look forward to the next one O G !

[@runerebel8441]

Thank you my friend. Iam very glad you like my videos. Hope to post another video tomorrow. Take care and have a great day 😃

[@mauihowey]

Nice fun on a chilly day!

[@runerebel8441]

It sure is my friend.😃

[@kurtj.9656]

Watching from the angle of your camera it seems like your SPA might have barrel droop. 🤷‍♂️. Not shure though. Or perhaps you can file off part of the tip of the front sight to compensate for the low point of impact. Just ideas, depending on your assessment. Take care amigo and have fun😂😂

[@runerebel8441]

Thanks amigo. When looking at it I cant see anything wrong, but if I have to I can always file the front sight down a bit. Take care my friend and have a nice weekend 😃

[@SkyPulse8]

Hi. Mr. Rune you need to increase the power😊

[@runerebel8441]

Hi my friend. If it had been a CO2 pistol I might tune it, but its a spring piston airpistol so I dont think I try and tune it for more power. I have very limmited strength in my hands and fingers and its hard to cock the action as it is 🤠. But for normal people a stronger spring might give a boost in power😎

[@joeht1586]

i have been having alot of fun with the umarex trevox its heavy and has a long trigger pull. but its accurate and powerful enough for some plinking/target shooting good fun to shoot a break barrel when you just want to take a few shots.

[@ilijabosnjak76]

I have same Shyt under different name,man that trigger is stiff but it its not that bad,wasn’t expensive and I just use Daisy flat nose or Crosman pointed,accuracy I don’t know I live in apartment 5 meters but no beer can went unpunished. But with broken shoulder I went AEG GF76 and Colt M1911 CO2,Dr. Said don’t do nothing for at least 2 months?.And wear safety glasses pls,one bb rikoshe and broke my watch.❤🎉

[@runerebel8441]

Yes it had a very stiff trigger, but after polishing the different trigger parts and soften the trigger springs its OK now😃. Take care and happy plinking😃

[@rquest3059]

That has more power than I expected, especially going through both sides of a tin can. Could you file down the front site to raise the point of impact?

[@runerebel8441]

Yes I was very suprised it gave this kind of power. I can file down the front sight, and I might do so next time.

[@dave1secondago]

great fun vid rune

[@runerebel8441]

Thank you my friend 😃

[@Lesslethalbandit]

Beautiful place rune

[@runerebel8441]

Thank you my friend 😃

[@omegaking150]

Sideways 👍

[@runerebel8441]

Thanks🙏. Its very fun to shoot this way. Gangster style 😁👍

[@chriswedgworth]

👍

[@runerebel8441]

Thanks my friend 😃

[@Waxmax]

Hi Rune, hope you are well. Great vids as always. Please could you check something. Would that barrel fit the Umarex m29? Unfortunately in the uk we can’t buy rifled barrels on own. This model is cheap enough to buy and use its barrel as a replacement but I need to know if the dimensions are correct. Any help you can give would be appreciated. 😊

[@runerebel8441]

Hi my friend. Thank you🙏. Hope all is well with you also. Iam not sure abouth the dimentions and if the inner barrel comes out of the plastic. My family is home now but I will let you know when I get a chance checking it 👍

[@Waxmax]

@ thank you appreciate it. If it did come out I know I would need to cut its length and perhaps shim or grind it a little to fit. It’s the overall diameter I’m not sure of. My gut feeling tells me it could fit but any help from you would be amazing. I need to do more videos as I have quite a few I want to do. It’s just finding the time as I’m so busy with work it’s draining me!! Enjoy your time with family 😃

[@runerebel8441]

@@Waxmax Thanks my friend. Just meassured it. The rifled inner barrel is 23 cm long. At the back it is 13 mm wide. Looks like you can push the barrel out the back. You might have to remove the bolt hinge first. Good luck my friend. Take care and have a great day 😃

[@Waxmax]

Thank you Rune. Do you think it is 13mm the entire length or do you think it slims down? From what you can see, does a barrel conversion look possible for the m29?

[@runerebel8441]

@@Waxmax No problem my friend. From the looks of it I guess the 13mm with goes all the way down to the muzzle, except from the last 1 cm or so. In the front it looks like the barrel is only ca 6mm or so. So it tapers down in the muzzle. I think you can grind the barrel down so it will fit in the M29. Maybe use a lathe to get it dont right.