hello, can I ask you some questions? Isn't the brake lever too far from the throttle grip? Doesn't it touch the ignition switch?? How did you solve it?
@vothuat6 күн бұрын
Hi, that is the brake, not the clutch lever. For the break, you never have to pull it to touch the grip (or you can not if you install everything correctly). In my setup, when I pull the lever with the maximum force, it's still more than 1cm between the lever and the ignition switch.
@MrAlfasul2 жыл бұрын
gone pick my 2019 821 up next week by the dealer ( previus ducati bikes 1994- 916 strada and 2006 monster s2r1000 ) also gona put it on my channel, hi from belgium
@vothuat2 жыл бұрын
That sounds good. Hello from Vietnam!!!!
@rp47123 ай бұрын
How did you keep your mirrors on using the RCS? Is there a hole to put your mirrors through?
@vothuat3 ай бұрын
The bracket that comes with the lever does not have a hole to hold the mirror. I have to order a custom bracket from a CNC workshop.
@MrAlfasul2 жыл бұрын
hi, get a monster 1200 brake line think it wil fit the brembo rcs , happy new year
@vothuat2 жыл бұрын
Thanks, I believe that the stock brake and clutch Master Cylinder on 1200 is the radial type already. So, the RCS or Corsa will fit. You will not need any adapter. Happy New Year!!
@MrAlfasul2 жыл бұрын
@@vothuat its fits the bike more (1 piece ) and yes ai was thinking also for the rcs , stock ones are ughly ( cafe racer has the ducati factory brake master cylinder looks great on the bike ) but instead ducati puts a cheap master on it , why ????
@MrAlfasul2 жыл бұрын
the brake light swiths can work not right -after instaling the brake light goes on and (yes haha ) when you brake its goes out
@vothuat2 жыл бұрын
It depends on the type of the brake switch (Always close or always open). I am not sure which is the type of M821 but the switch that comes with the Brembo RCS works well on my bike.
@MyAndreaChannel2 ай бұрын
monster 821 is not hydraulic clutch, so no pump need, there is just a cable clutch.. Monster 1200 is hydraulic with actuator.don't understand
@vothuat2 ай бұрын
@@MyAndreaChannel I installed a ducabike kit that change the cable clutch to hydraulic clutch. All part are plug n play.
@ronawilocbenia5656 Жыл бұрын
San ka nakabili sir
@vothuat3 ай бұрын
From the motorbike workshop.
@MrAlfasul2 жыл бұрын
one last thing how realeble is your 821 seems lots of complains about the driv by wire trottle ducati chood haf stay whit te cable not the wire ,but that is for the invyerment claener output from the exaust - safe the planet !!!
@vothuat2 жыл бұрын
After 3 years and 16000 km, so far so good. The feeling of the drive-by-wire is a little bit delayed when you twist
@sohott_2 жыл бұрын
Hi, Can i get your OEM master cylinder if you don’t need.
@vothuat2 жыл бұрын
Hi, I would like to keep all the oem part so I can not sell it to you. Sorry about that. Have a nice day.