Unbox & setup a FlySky Nobel NB4 Transmitter with 2 Mini-Z Micro Receivers - Pt. 1

[@cosmicstuff44]

Around 23:00 where you're speaking of the neutral/dead zones, you're in the screen for throttle neutral there, but you mention it creates a dead zone for steering... is that a mis-speak or...? Also, you mention in description area "In the link below, I install one of the micro receivers into a new Mini-Z MR-03 EVO" but there isn't any link?

[@jozimoto]

I've had mine for about a year now. I would like to point out that not only is there batteries in the detachable pack the handle has batteries in it. The detachable pack can also charge you smart phone if needed. I bought this because I drive left handed and have since the mid 1980's when I got started. This is the best radio I have ever owned an I have had to own mid to upper end radios due to wanting a Lefty radio. The only caution is this radio uses the AFDHS3 protocol. You can't use just any Flysky receiver with it. It unique to the Noble and the Paladin model radios. The Paladin is a stick radio

[@MyRCChannel-CJScott]

Thank you for the info... I 'm going to do a follow up video to give my experience after I've driven with it a bit. I'll definitely pass on your comments to the audience. And I'll be sure to warn them about the protocol. Thank you!

[@Wotup72]

I'm waiting for mine to get here from China. Thank you for the great information!

[@MyRCChannel-CJScott]

You're welcome. Thank you for watching! Did you order yours for mini-z, or other RC cars?

[@Wotup72]

I got it for the new TLR tuned Typhon. But I have an Outcast 8s a kraton 6s a big rock , and 4s redcat shredder that I want to get receivers for.

[@Wotup72]

@@MyRCChannel-CJScott and It just arrived in the mail!! Should be getting the tlr tomorrow. So pumped 🙌.

[@MyRCChannel-CJScott]

@@Wotup72 Excellent! There's nothing like new package day! I just got a box from Japan full of mini-z parts... more fun with tiny cars. Let me know if you have any questions during your build.

[@Wotup72]

@@MyRCChannel-CJScott Cool, if I do I will.

[@MrBiscuit_WithButter]

Is it normal that two different mini-z cars, one setup in slot 1 and the second in slot 2, both cars respond regardless of which model you choose?

[@rcalchemy766]

Which 1:28 Pan Car do you have or recommend? Cheers & Happy holidays!!!

[@MyRCChannel-CJScott]

Hi, I'm building the GLR-GT 1/28 RWD Chassis... here's a link to a good vendor in the US: www.microrcsyndicate.com/product/glr-gt-1-28-rwd-chassis-w-o-rx/546?cp=true&sa=false&sbp=false&q=false&category_id=18 You can also order direct from GL Racing: gl-racing.com/store/index.php?route=product/category&path=69 I'm also adding the REFLEX RACING - RX505 GL RGT TRIPLE MOUNT CONVERSION. This converts the rear shocks to the arraignment from the previous model... According to the manufacturer, "This rear end drops the CG of the car further, provides better traction and drive out of the corners than the side shock or the standard set up. The handling is more precise and consistent with better grip, flatter cornering, less traction rolling, more rotation, more forward and side bite all, while making the car MUCH EASIER TO DRIVE."

[@vincebrizio953]

HI, I tried to bind my MR04 evo2 with my Noble NB4 but nothing! I first turned on the radio by selecting the model (1) then in the RFsetup mini-Z EVO (and not FHSS) and starting the binding; then I turned on the MR04 by holding down the button and only the LED (red) flashed quickly, but nothing! I tried to update the receiver (yellow antenna) but it remained at 0% and the LED continued to flash red! Any advice? 😨

[@MyRCChannel-CJScott]

I remember having a lot of trouble getting mine updated and bound. It almost takes three hands, some of the buttons on the receiver are so small. Trial and error is the only way. Try not to get frustrated and follow the instructions. You’ll eventually figure it out! Is there a hobby shop near you where you can get some hands on advice? Thanks for watching, I’m sorry I can’t be more helpful, CJ

[@vincebrizio953]

@@MyRCChannel-CJScott thank you for your answer!! 👍

[@filmdiesel3568]

Hey I just got this in the mail, I didn’t check before hand on the receiver, they look identical to yours. I will be using on a crawler and xmaxx, do I need send it back and get a complete different setup or can I just offer different receiver

[@MyRCChannel-CJScott]

You can order different receivers, but if you are not going to run mini-z, I'd do a return/exchange for the combo that comes with standard surface receivers. I guess it depends on how long you want to wait, and how much the return shipping costs, etc. Good luck, CJ

[@madelinesimmons4038]

Just ordered mine tonight I'm building my new Mine z brush set up..

[@MyRCChannel-CJScott]

Cool, it's a great transmitter, you enjoy it for sure!

[@chuongnguyen3230]

hi mate, I'm planning to buy this bad boy.

[@MyRCChannel-CJScott]

Make sure you select a combo with the types of receivers you need. Most of the time it's bundled with 2 receivers, either micro for mini-z, or regular for "normal" rc cars. I went over this in the video, but I wanted to make sure you get the right one for your needs... This is my 3rd FlySky transmitter and they've all served me well.

[@chuongnguyen3230]

@@MyRCChannel-CJScott Thanks mate for the advice