Unboxing a laser machine | Uncrating Speedy 400 or Speedy 360

This week on Tech's Corner, we'll show you how to properly uncrate a Speedy 400 (or Speedy 360) laser engraving machine. Many of our customers aren't always sure how to properly use the ramps, for this we're showing a quick and easy tutorial.
For domestic pricing and to set up a demo:
www.troteclaser...
------------------------------------------------------------------------------------------
To get a quote on our laser engraving and cutting machines, please contact us below:
Phone: [phone]
Email: [e-mail]
Website: www.troteclaser...
Follow us on social media:
Facebook: goo.gl/UfHnEa
Twitter: goo.gl/GEgTwQ
Instagram: goo.gl/gJN5b4
LinkedIn: goo.gl/oBL6V4
Trotec Canada locations:
Vancouver | 20381 62 Ave #705, Langley, BC V3A 5E6
Calgary | 820 28 St NE #2, Calgary, AB T2A 6K1
Toronto | 1705 Argentia Rd #9, Mississauga, ON L5N 3A9
Montreal | 8096 Trans Canada Route, Saint-Laurent, QC H4S 1M5

[@jamiesmithnc]

The ramps are brilliant

[@brandongifford5136]

Are all 4 wheels rotating casters? We need to spin the cutter in an elevator after taking it out of the crate. Thanks!

[@TrotecLaserCanada]

yep all 4 thanks

[@4570Govt]

Can I just leave the laser on top of the pallet, so I don't have to use the casters? I ask because in my workspace, I have everything on pallets, which allows to move things efficiently by myself. Materials are on a rack, bolted to a pallet, computer desk is bolted to a pallet, etc. It would be nice to move the laser just a little bit, easily, so I can vacuum/clean around the back once in awhile. Do you have any customers who do that, leave their 360/400 on top of the pallet?

[@TrotecLaserCanada]

Hi! Yes of course, there is not reason why you can't. We don't personally know customers who do it, but it's perfectly safe.

[@4570Govt]

Thanks!

[@TrotecLaserCanada]

Anytime!

[@missbabydeni]

How much does it cost?

[@TrotecLaserCanada]

Hello, we cannot give pricing over the internet. Please provide your email address and country and we will send it to the appropriate partner.

[@Gibakook]

Can I get the speedy 400 through a doorway that is 88 cm wide? Can I remove the bottom part and carry it on its side??

[@TrotecLaserCanada]

In Canada our standard doors are about 36" wide. Generally speaking, yes you can split the Speedy 400 horizontally and fit each piece through with the proper moving company.

[@Gibakook]

Thanks for answer. Split horizontally? The top and botton appear to be connected, no? And is it safe to turn the pieces on their sides without damaging something inside??

[@TrotecLaserCanada]

@@Gibakook Yes the bottom part comes off, but again we always recommend to use a professional moving company and work with your local Tech Services department. What location are you in?

[@bobfulton3097]

Nice job, I love the rams.

[@bobfulton3097]

"Ramps"

[@TrotecLaserCanada]

Thanks!

[@taochiu8073]

is it the same way as SP500?

[@TrotecLaserCanada]

Hi, no you would need a forklift for the SP500