Unboxing + Installation of Tp-Link Archer TX3000E (AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter)

[@FriantAle]

Was searching for the magnets and finally a video where someone show it in vertical, thanks!

[@mohamadayub8360]

Thanks helping the lot of me…now i know how to turn on my pc using my nose already.

[@jackdragon8972]

HAHAHAHAH

[@yasss6787]

thank you for your video! helped me set it up fask 😄

[@r.pamintuan4586]

my gpu covers the x1 slot. so the only available slot is the x16. can i put it there? will it work fine?

[@russkraine2151]

nice vid man planning to buy this

[@dragoonxgamer]

Does it work with windows 11?

[@JaviTooStrong]

Could you connect the anntenas directly to the card itself or you need the cables and the base?

[@tzx_]

you can connect the antenna on the pcie card without the base

[@joshwillis4523]

Do I need to install that wire into the motherboard for WiFi ?

[@tomascandiotti7295]

Yes it goes into a USB port on the motherboard

[@Selvanii]

@@tomascandiotti7295 Bought it like 10 minutes ago and noticed this. Thanks for the info

[@tomascandiotti7295]

@@Selvanii np brother✌

[@robinemrich5693]

Thanks Helped alot

[@ahmadjo5757]

can you check the bluetooth version from device manager on that? I wonder if the version with (5.0) on the box does actually support (bluetooth 5.2), I'm buying one but need to make sure it supports 5.2 as I asked the shop and they said it says 5.0 on the box.

[@clutchpatch4457]

aye it never says how many pins is the plug in thing like into the mobo

[@ThrooGRV]

Can I still use this even if I don't have a wifi 6 router or modem?

[@jackdragon8972]

Yes you can use it but you will not get the wifi 6 speed and stability

[@Nootelley]

Nice I have this case too haha

[@monacocross4241]

my home speed 500 MB/S , when use it via cable get 480 mb/s of speed , when used this adaptor TX3000E only 390 mb/s its normal ? or imposobal get full speed like cable 480 mb/s >? thanks

[@lorenzodepecol]

Just purchased mine, and I was wondering if and how did u deal with the presence of only one USBF header on your motherboard (mine has only one, and I'll sacrifice the two front 2.0 USBs for BT connectivity)?

[@Ryet9]

This is kinda my problem as well.. I have 2 * 20pin USB-C headers.. one goes to the front... other to the back for more 3.0USB.. my regular 9pin USB header is in use for AIO Pump/Cooler.. Going to get a "20 Pin Female Header to 9 Pin Male Header USB 3.0 to USB 2.0 Motherboard Adapter" so I have to lose some USB3.. BOOOO

[@unoyoshiblu700]

Can you plug the card in a "standard" (big) pcie slot?

[@ares2067]

Yes you can

[@L1minaL-w8p]

It doesn't work and isn't detected, furthermore, it got rid of my normal internet driver so now my PC has no internet at all....

[@muhdhelman4264]

U need to download the new driver

[@olegkolgatin5279]

Hello. Did you solved it? My pc seems to not detect it too :( Msi b450-a pro. Nothing in device manager. Damn

[@mk7maze347]

Do i need a pcie cable or is one in the packgage inclusive?

[@yupickmyusername]

Apparently not according to the store i went to buy this

[@MrCreeps666]

Thanks helped alot I have the same motherboard so niw I know where the usb slot is.

[@FdobleRRapers]

😂

[@Balota7603]

Do you need a specific type of motherboard or is it universal?

[@jackdragon8972]

You need a motherboard with a pcie slot

[@bakenslay8412]

Where is the installation at bro you only showed us how to put the device in the pc nothing else

[@tomascandiotti7295]

Relax bro what do you need to know?

[@knight2155]

@@tomascandiotti7295 help bro i just installed it

[@knight2155]

@@tomascandiotti7295 no network available because I don’t have the drive and i can’t insert cd in my pc

[@tomascandiotti7295]

@@knight2155 Ok what you can do is either hook up a ethernet cable to your motherboard or go on an other computer that has Wi-Fi and download the drivers through the official website then put it through a flash drive. Hope that helps brother.

[@knight2155]

@@tomascandiotti7295 i tried inserting the cd in a laptop and transferring everything inside it to a usb memory and the memory stick worked just like the cd when i plugged it in my pc, thanks a lot brotha

[@hamoodyman9239]

cut the music dude can't hear shit

[@marcinmowinski5643]

hi, do you kno why bluetooth is not appearing in the settings?i cant turn it on at all. its just not there.can you help?

[@adamnajmi8526]

maybe you need to install the driver first

[@marcinmowinski5643]

@@adamnajmi8526 I connected the card to a different usb header and it works now. Thank you for your reply.

[@AnonymousRaimon]

Hi just bought this and trying to install it. Does it work automatically or do we need to install the drivers for bluetooth and wifi?

[@rawjusticeman3128]

you need to install the drivers to get it to work. Go to TP link website and download the drivers, both for Wifi and Bluetooth and install them separately.

[@fighterxofficialYT]

@@rawjusticeman3128 so how r we aupposed to download it before wifi

[@mr.n476]

@@fighterxofficialYT good question 😂😂😂💀

[@decap6831]

@@fighterxofficialYT most people will plug in their pc next to their router with an Ethernet cable to install their drivers, and then move the pc to their main area. Very annoying

[@Callsign_Kicker]

@@fighterxofficialYT usb

[@kamasotomonte5043]

Whybdoes it need a usb .

[@Masturdebater87]

Not an expert, but I'm guessing that is the conduit for bluetooth signal.

[@FerGus-pp1te]

energy

[@Docteezy2k]

what should I do if I dont have any JUSB hub available on my b450 mortar max mobo because of the nzxt elite hue hub and x63 pump what should I do?

[@itzeugsde]

As far as i know WLAN should work without USB connection. Only Bluetooth will not work. But I will get the card in a few weeks.