UNBOXING: Maxdone Laminator Machine Review 2022 | Cold and Thermal Laminator with Paper Trimmer

👇👇 PRODUCT LINKS 👇👇
Laminator Machine
✅ amzn.to/3bJQyQb
👇Try Amazon Prime for 30 Days FREE!👇
✅ amzn.to/2AfahnX​
🔴 Business Inquiries: [e-mail]
Faster Preheating and Higher Laminating Speed: The laminator machine after self-developed and upgraded , the speed is 10~25% faster than the marketed laminators, has a laminating speed of 13.98 inches/min(355 mm/min); It only takes two minutes to warm up, 3 minutes to 5 minutes of preheating will be better and fast preheating and smooth lamination, saving your precious time.
ABS Anti-Jam Button: When a paper jam , turn off the laminator, press the ABS button, and then pull out the paper. The ABS button can solve the paper jam problem effectively and conveniently.(TIPS: Insert the item on the edge of the laminating pouch and laminate the sealed edged firstly.)
old & Thermal Mode: Hot lamination is used for general documents and is suitable for daily use, while cold lamination is used for documents with inks or prints that are sensitive to high temperatures. When using cold mode, use self-adhesive bags (need to buy it by yourself).Thermal lamination is suitable for any 3 mil to 5 mil laminating sheets.
Laminator Machine for A3/A4/45/A6:The dimensions of the laminator are 16.85 x 4.8 x 2.56 inches, it can laminate up to 13 inches wide (A3) with 3-5 mil pouches thickness for pouches from 160mic (2x80mic) to 250mic (2x125mic). Maximum operating temperature is 293°F. Suitable for photos, cards, certificates, work permits, menus, drawings, etc.
Favorite Products
➡️ Favorite Air Fryer: amzn.to/2QDRECc
➡️ Favorite Juicer: amzn.to/3cWn9ig
➡️ Favorite Bread Maker: amzn.to/32zAYxR
➡️ Favorite Chest Freezer: amzn.to/2FvVVTb
➡️ Favorite Ice Cream Maker: amzn.to/3cek36X
➡️ Favorite Blender: amzn.to/3zGXIL5
➡️ Favorite Coffee Maker: amzn.to/3tdyORv
➡️ Favorite Sauna: amzn.to/3zyGVdl

[@wildcatslife686]

Can I cut it by scissor?

[@KGSimpleReviews]

yes definitely!

[@lisadeloach8932]

Mine is warping and bubbling 😠🙄😭

[@surajenniyah1711]

@@lisadeloach8932 If you want to have a perfect plastic effect, it is recommended to buy an iron laminator.These machines can adjust the corresponding temperature according to different film lamination thickness