UNBRICK GUIDE XIAOMI REDMI 9A/9C WITHOUT AUTH! OFFLINE FLASHING ! 2021 EXCLUSIVE

Contact Support Telegram :t.me/tthackstudio
Downloads : FLASH TOOL DRIVER BYPASS TOOL
drive.google.c...
LIB USB : sourceforge.ne...
PYTHON 3.91 : www.python.org...
Python CODE : python -m pip install pyusb pyserial json5
unbrick dandelion
HOW TO UNBRICK XIAOMI REDMI 9A
REDMI 9A SYSTEM HAS BEN DESTROYED
REDMI 9A STUCK AT MI LOGO
How to unbrick REDMI 9A
REDMI 9A UNBRICK
UNBRICK REDMI 9A WITHOUT AUTHORISED ACCOUNT
REDMI 9A BYPASS FRP MI ACCOUNT
UNBRICK XIAOMI MTK MODELS WITHOUT AUTH
[GUIDE][UNBRICK] How unbrick your bootloop in after flashing TWRP (Xiaomi Redmi 9A
Redmi 9A İnceleme | Cüzdanınızın dostu Redmi 9A
Xiaomi Redmi 9 hard brick
How to Unbrick/Unroot Xiaomi Android Stuck on Fastboot!
Xiaomi Redmi 9 hard brick
UNBRICK REDMI NOTE 8 PRO WITHOUT AUTHORISED MI ID ! OFFLINE FLASHING 2021 FREE EXCLUSIVE
How To Flash Redmi 9A/Redmi 9 Or Any Xiaomi Phone With MI Flash Tool Without Losing Data!!
Yetkili hesap olmadan Xiaomi MTK cihazlara yazılım atmak 2021
DOWNGRADE REDMI 9A FIRMWARE

[@alonemonarch6661]

thank you so much sir, my 9A booted again. (mine is bootloop and can't enter fastboot or recovery after flashing recovery.img on the twrp) but first I got an error when I try to enter the command on the cmd, it turns out you just need to change the _python_ to _py_ , so it should be py -m pip install pyusb pyserial json5 Hope it works for others too

[@kevinlinares3997]

help , it stays in the red bar for me and it doesn't happen and it comes out at the end: error: status_ext_ram_exception (0xC0050005)

[@lalajisharma5293]

Usb not recognise error show and device not connected

[@kakashi7113]

Same

[@_____573]

​@@kakashi7113same problem bro any solution

[@kubakite8447]

You need to get a high quality cable

[@yhurasaputra9629]

Is this work for softbrick phone? My friend's phone got softbrick after failed ubl instant

[@michaelcarannante2531]

When im on sp flash tool and press download it show me error: status brom cmd start cmd fail How can i solve it?

[@modernmountaineer]

Did you uncheck the cust partition before pressing download? thats the only thing different i saw him do. I also get the same brom error everytime. i think its due to lack of authorized account . i dont think there is a way to buypass the sla and da check that occurs. im going to try his way before i quit.

[@merbyjosequinterotorres1975]

Sir, i flashing ENG firmware forgot delete cust, after flashing procede to flash stock firmware and get black screen, u have solutions?

[@mackj8974]

can u provide the dl link of the firmware you used in sp flash tool? TIA

[@mercybarrios8367]

One problem the phone does not get rec9gnized after i downloaded mediatek driver

[@socrataiken]

Did you find any way to solve it? I used sp flash tool first and it did something similar now my mobile doesn't recognize my pc anymore

[@cereus7421]

Your video is help to me. I successfully unbrick my phone. Thanks and best regards.

[@subashsubedi3110]

my mobile is bricked hardly. the windows says usb device is not recognized. already tried installing several drivers but didn't work. what to do? please help

[@_____573]

Same problem bro any solution 😢

[@silenthack331]

Same issue

[@anku3938]

kisi ka solve hua kya ... hua tha detect ,show kuch... please reply

[@AD_ter]

​@@anku3938 Remove the battery pin and try 👍

[@pranavkrishnan7289]

please help me bro mediatek port is not available for me my phone is redmi 9a please find me a solution bro this is the only phone i have bro

[@SAHIL-qn3dn]

brother please help, my device isnt showing in the list where i have to press volume button and connect

[@roku5332]

can you help me, after brom detects phone it goes blue screen of death and after that brom gives an error

[@hometown8027]

what can I do? My case is "usb device not recognized" when install libusb. Please help.

[@_____573]

Same problem bro any solutions 😢

[@anku3938]

did you get it or not... please reply

[@computercomputer5932]

why its not working for mee like yours while adding scater file , without process files addingjust in 1 second any one can help me . whats is problem .

[@suatd]

thank you so much man. its working :) i applied to redmi 6a.

[@TTHacKStudio]

Abi abone ol 😎

[@suatd]

@@TTHacKStudio oldum :)

[@lostfxo]

@@TTHacKStudio kanka edl moda nasıl alcam la

[@TTHacKStudio]

@@lostfxo KANKA NE EDL BU MTK ))) SES ALMA ACMA TUSLARI AYNI ANDA BAS USB TAK

[@lostfxo]

@@TTHacKStudio Teşekkür ederim knk

[@marlinipekankamis3959]

Do i need to remove battery first?

[@martinnovak8302]

redmi 9c black screen, when i plug to PC = unknown device , this video doesnt work.

[@theubusu]

Thank you this working for redmi 9a

[@Tazque17]

CMD error could not find a version that satisfies the requirements pyserial (from version: none) Error No matching distribution for pyserial

[@DarisYT]

Why did you uncheck the cust partition?

[@kanyikejulius3727]

Pls get me the link to that scatter file that your using please

[@kalinpenchev9892]

Hello, I can't find the dandilion folder in the description. how can i get it.

[@Esports.EmpireZ]

on cmd,wont detect my device ..redmi 9

[@TTHacKStudio]

driver update

[@YTSocmed96]

Working fine, device is same (dandelion) .. 👌

[@TTHacKStudio]

👍 like and subscribe bro

[@Charls-HDZ]

unlock the bootloader and try to install a rom when restarting it no longer showed signs of life the device does not enter neither revovery nor fastboot with this tutorial they think it will be fixed I hope your support thanks

[@poniponi7559]

Sir, I received an error on the cmd step. ERROR: Could not find a version that satisfies the requirement pyusb ( from version: none ) ERROR: No matching distribution found for pyusb Please help

[@computercomputer5932]

the pytone command not working with cmd whats problem/

[@adam95reg]

где прошивку скачать помоги? все есть установил прошивку не могу найти

[@adam95reg]

redmi 9a

[@Alex.5169]

Any solution for Redmi Note 8 bricked on miui logo and locked bootloader?

[@bukisio5867]

any version of python whose can use at windows7 ?? pleasee help me.. my redmi9 bricked.. stuck at mi logo an always restart self

[@mohdkhusyairie7121]

Use python 3.8.6 for windows 7

[@jayhuang23]

my device doesn't show mtk driver in usb lib

[@animeparadise8322]

my phone is not detected in libusb win32 why is that?

[@honjiida]

Is this possible on a locked bootloader?

[@cup_of_air5079]

I had a issue while flashing the rom via SP Flash Tool: First of all, I'm pretty sure that I had installed the driver correctly and then I used the latest SP Flash Tool 5.2216 version, and I also bypassed the protection of brom and I also used a custom DA. So the problem is when I tried to flash the rom via the tool, I bypassed and clicked the download button but it stucked at the red bar Download DA 100%, I only have this phone, please tell me the solution

[@souhailsboui6022]

Sir did you have a soluction for your problem ? am having same issue

[@cup_of_air5079]

@@souhailsboui6022 I fixed it by flashing China MIUI 12.0.16 through, I hope this can help you.

[@ilhamrizki6326]

@@cup_of_air5079 THANK YOU SO MUCH BRO YOU FIXED MY PROBLEM

[@androidmodinfo]

Can I use this method for poco c3?

[@moazsayed7246]

thanks bro , life saver

[@himanshuagarwal20]

Hello Sir, My Pocophone is hardbricked. Cannot flash using Edl mode without Mi Authorised Account. Can i restore my hardbricked phone ? if there is any solution please post

[@TTHacKStudio]

Poco f1 or another model?

[@BangKholeng_]

it doesn't need to install the driver bro

[@lunikarchangel]

restart your computer and disable the drivers signature before launch windows.

[@RoyalPolo]

Redmi 9A black brick can be repaired?

[@lockhans-djogja6468]

phyton gak bs di instal di win8 om... apa harus ke win7

[@lockhans-djogja6468]

format .exe.asc yg exe doang apa ada di versi bawah ya?

[@jholanoliva9509]

Bro my device not detected

[@cio09k]

Hi everyone, I'm stuck at 4. Step; so when I connect my phone to the computer and press +, the device does not appear in the list. Windows keep pops down the corner and saying usb device doesn't reconized.

[@DarisYT]

use different usb cable and change ports

[@cio09k]

@@DarisYT thank you :)

[@DarisYT]

@@cio09k i actually have the same issue now and cant fix it 😅

[@silenthack331]

Same issue, how to fix

[@hoangnhi9306]

Does it work on windows 11 ? Please hepl me. Thanks you

[@TTHacKStudio]

working

[@ayiees0735]

How about redmi note 9 pro is it can?

[@emersonsantos4307]

Hello friend I would like to know, if this works on the pocophone f1, my device is on hard brcki, it doesn't turn on.

[@TTHacKStudio]

poco f1 is qualcom 845..This method for mtk

[@abdullahallahnkulu9805]

benim telefonum 9c formattan sonra mi hesabında kaldı. bootloader kilidi de kapalı... Ne yapabilirim?

[@TTHacKStudio]

zor kardeş.. Ücretli hizmetler var bunun için..

[@zactrife]

where can i get the rom? thank you!

[@jangarnonton4835]

Sir baypas mi account it working?

[@dllllooooo]

What to do if it freezes Download DA 100% In sp flash does not show chip data

[@nuttyled8435]

try other firmware

[@MariaYoutube915]

I can't open CMD for crypthon

[@Omar_Donovan]

thyanks you save my life bro

[@iamrentao23]

mine did not boot or turn on

[@yevhen5936]

brom ok, Download DA 100% And nothing happend. ERROR: STATUS_EXT_RAM_EXEPTION (0xC0050005) after 2 min

[@manuelcb3412]

Prueba con sp fashtool v5.1952

[@erikquimbiulcogarcia]

Porque no flashear el cust ?

[@tolgaonculoglu3613]

Bootloader açıkken bu şekilde brick olursa yaptığın şekilde yapabilir miyim ? Lütfen yanıtla cesaret alıp rahatça rom yuklerim olur dersen :)

[@mummykasrod9553]

link me poora file nahi he bhai

[@TTHacKStudio]

please English

[@Mahsutovtar_familys]

Саламалейкум не могу найти Scatter файл где можно скачать

[@linhtutkyaw3675]

Where is images files

[@testtest-ib2oz]

thanks dude for guide, can u have solution for enable mass storage at redmi 9a miui 12?help me for recovery my file :)

[@TTHacKStudio]

it is inpossible )

[@testtest-ib2oz]

@@TTHacKStudio okey thanks dude

[@MG.Fishing]

спасибо, раскирпичился

[@elcampionepro2788]

Bro please how can I fix for redmi 8 hard brick without authorization?

[@TTHacKStudio]

on my channel yes video for Redmi note 8 pro

[@TTHacKStudio]

you need chimera tool or umt

[@hakimabeoub4189]

any solution for baseband ?

[@TTHacKStudio]

try meta

[@m.ahsan01]

make video on redmi note 10 plz

[@jeanundurraga7250]

ojo da es para note 9 error

[@k.h-fix2291]

How to Bypass mi account Redmi9a miui12 locked bootloader no relocked?

[@TTHacKStudio]

Open flash tool and go the format manual format hex Adress Mi Account Remove 0x47000000 0x3000000 FRP bypass 0x3bd88000 0x100000

[@k.h-fix2291]

@@TTHacKStudio connect WiFi relocked

[@TTHacKStudio]

@@k.h-fix2291 I did not have such a device. I need to test

[@Shivu1234abc]

Thanks

[@jamilpardo4109]

me funciono con la version de mui 12.0.17 global . Para entrar al modo edl use un programa alterno ya que con el comando de cmd no me funciono.Para recuperar imei despues use rom de ingeniero y el programa moden meta

[@yennysolorzano]

Podrías decirme el nombre de las aplicaciones q usaste xfa vor?

[@socrataiken]

bro tienes alguna solucion a lo que me pasa, intente usar sp flash tool se quedo atascado instalando la rom oficial y ahora el pc no me reconoce el movil

[@eminshebiyev1096]

its worked for me

[@OSIRIS1337q]

я один заметил то что ты из снг?

[@sahinkhalilov6664]

Thanks bro

[@Hasi.Mazak.ka.khazana]

Full flash same condition hang logo

[@mulaat0]

Not working on Redmi 9🤢

[@mulaat0]

@@TTHacKStudio is mediatek

[@mulaat0]

@@TTHacKStudio mt 6768

[@TTHacKStudio]

@@mulaat0 codeload.github.com/MTK-bypass/exploits_collection/zip/master download this expolit and copy the mt6768 bi to payload folder and try

[@mulaat0]

@@TTHacKStudio okk, thank u

[@mulaat0]

@@TTHacKStudio still not working

[@supercellzhs2622]

for redmi 9 please

[@mohammedkalander7977]

genius

[@IvanFollow]

Не работает

[@aswantowanto6738]

give me firmware link please..thankyu

[@TTHacKStudio]

model? 9A or C

[@WOT-hf4wu]

9a

[@m.t-hidayat1112]

Not working , Sir After flashing "botloop" Help me..

[@TTHacKStudio]

Flash india firmware or downgrade try

[@m.t-hidayat1112]

@@TTHacKStudio Fine, I'll try

[@TnLagy]

No pc pls 🙏🥺🥺😩

[@thordoctor_]

Does it work on a Xiaomi Mi 10 T Pro?

[@TnLagy]

@@thordoctor_ no

[@MariaYoutube915]

I will try;((

[@honjiida]

Is this possible on a locked bootloader?

[@TTHacKStudio]

Yes

[@honjiida]

@@TTHacKStudio Can I get a link to the firmware file?

[@TTHacKStudio]

@@honjiida c.mi.com go here download miui rom section

[@honjiida]

@@TTHacKStudio Thanks very much

[@musicvr3368]

sp flash tool not working pls help

[@TTHacKStudio]

install mi flash pro go location installation find here splash tool

[@musicvr3368]

@@TTHacKStudio thanks, already figured that out