Uncasing Epson EcoTank & Fix Error 202260 WiFi is Out of Order

[@TheRealMzGee]

This is something Epson should be responsible for

[@itsupport7466]

yea its been a year and its already gone

[@erikhansen9309]

Sending love to the fine people at BCH! Super helpful and resolved my issue. With 39K views, I think you've solved a lot of people's issues.

[@jdoa91]

I followed all the steps and succeeded great fully, in my case I just disconnected the WiFi module, cleaned and re-connected back to the board, and it’s working again. It was a little tricky to remove the panels, but eventually made it

[@MATTHIEURICHARDPEÑAVEGA]

Thanks a lot!! I followed the steps in the video. I just removed the WIFI sensor, cleaned it a bit, put it back, and the dreaded Error 202260 was fixed. Greetings from Peru! :D

[@robbunch2225]

My wifi part was Epson 2207229 Wireless Module, got it shipped from Prime Parts $40 CDN. The scanner bed is difficult since she doesn’t show it well but slides on plastic shaft pins. Broke part on mine but glued it back. Working unit !

[@Saif_4229]

It actually fixed my wifi problem, since I already had a wifi chip already in I just took it out, blew it in and the port to remove any dust and pressed it in firmly. No more wifi issues and no errors… so far

[@SaschaKleiber]

How about now, after 6 months? ;-) Im curious if the problem reoccured...

[@JessieJamesDab]

Omg thank you I just found this video and it saved my printer. Had to remove it and clean it up and it finally connected. I’m going to order a replacement just in case it turns out to be faulty.

[@BRYANLOPEZ-zt3st]

Thank you so much for this video, I did it just cleaning the main and Wi-Fi board with an electronic disperse by SABO and just plugged it in again and it works perfectly!

[@vee9133]

Where do I purchase that replacement part from?

[@princesmith1215]

Thanks this was great!! Do you have a link for the Wi-Fi board?? I need to replace mines

[@shellysolomonart]

Which wifi board is it?

[@syrenahoseley3592]

Where would I get a Wi-Fi board? I’m getting the same code

[@TheRealMzGee]

Same question

[@andresponton]

X2

[@AnaLopez-ji6ee]

Same question../

[@darylfranck8854]

AliExpress

[@dittytwo]

Hey there any ideas where to get the WLU6320-D69 in the UK

[@salmanrashid6245]

I just re-seated my wifi board and it works! Thanks for the video!

[@michellebeliveau8521]

I took apart my printer to try to fix the wifi board and now I cannot reattach the scanner and lid. Is there any way to show a close-up diagram of how to do that? Since the printer in the video is black, I am having a hard time getting a close-up of how to detach it and where the screws are located.

[@mariabelenzapata8671]

Question: would you happen to have the model number for the wifi card? I have an EcoTank L6270. Also, do you Sell the card?

[@bambamnchd2]

​@BCHTechnologies I was able to fox the wifi card but after i put it together now i het 3 blank pages and says paper out. What did i do wrong?

[@salmanrashid6245]

You have forgotten to connect one of the wires pack...maybe the paper sensor.

[@fluffydandruff]

I fear if I take it apart, I'd never fit it back again. Who am I kidding? I can't even fix legos. Thanks anyway. I'm holding a memorial for my printer.

[@Luiz.alvinegro]

Tenho que tentar fazer isso aqui

[@strangerscantbe]

Do you know why this happens?

[@salmanrashid6245]

no, but likely poor contacts or solder joints on the wifi board.

[@MC4175]

Thank you

[@stephanzuijdendorp2531]

all nice but that is not something a regular user can do. Just bad quality from Epson I would say. Using this printer for just 3 years now and this is the problem already.

[@dianachavez3106]

I had mine for 3years too! And it's giving me this code

[@TheCorneliuos]

@@dianachavez3106 One time, it happens, twice coincidence, three times a pattern. I got this error with around three years of use. I guess this is it.

[@samuelaguilar8416]

Thanks master

[@VladimirAstapenkov]

Tried it, doesn't work. still the same error

[@BCHTechnologies]

Thank you for trying out the video! I appreciate your feedback. If you want, you can email [e-mail], we can troubleshoot together to find a solution.

[@abrarmohammad4594]

Hey, Kevin the nozzle is ok in epson printer, but still the lining comes, what adjustments and alignment have to be done, plz make a video

[@BCHTechnologies]

That's weird. Are those lines vertical (perpendicular to the printhead movement)?

[@abrarmohammad4594]

@@BCHTechnologies no it's horizontal brother

[@BCHTechnologies]

Then I would worry about how the ink is fed into the printhead. Are the stripes uniform and small, or is it large and sometimes skip the whole section?

[@abrarmohammad4594]

@@BCHTechnologies yes it is small almost 1 centimeters gap between 1 line to 2

[@abrarmohammad4594]

@@BCHTechnologies ink is genuine and I always putt it gently

[@ClintEsteMadera]

I just plugged it via cable, these Epson guys will not make me buy a printer again after 2 years and very few prints... Epson: first and last time I purchase a printer from you, got it?

[@sandracarli1110]

That's printer surgery I'm not willing to do ... WTF???

[@BCHTechnologies]

Do you think the world care what you are willing to do?

[@salmanrashid6245]

yes, if you are a bit tech savvy you can do it.

[@sandracarli1110]

@@salmanrashid6245 Unfortunately, I’m not. I don’t think that a customer should have to do such lengthy and dangerous job after spending money for the product. 😓

[@salmanrashid6245]

@@sandracarli1110 you are absolutely correct that customers should not have to do it. I did just fix mine but 'I am quite tech savvy. If you lived close by I would help you out for sure.

[@sandracarli1110]

@@salmanrashid6245My printer is quite new and I am still having problems with it. Sometimes it says there is no connection, sometimes it says the spooler has a problem and sometimes it prints without problems when it feels like printing... That makes me angry. I had a second hand (!) HP black and white printer for 10 years and it printed so well without problems so I really am not used to such bad performance. Thank you for your kindness. Too bad we are not neighbours. ;)

[@berkay1cetiner]

This is completely intentional from Epson. I see that almost every user get this wifi error after 2-3 years. My printer is stationary at its place for years, how does a chip that kept very well got faulty all of a sudden? Chip lifetimes are much much longer normally. Never buying an epson again.

[@FraYoshi]

I have the same problem, and I just power it on to print, otherwise is powered off, which would account for 99.9% of these 2/3 years! So yeah, programmed obsolescence probably.