Uncasing XP-7100 - How to disassemble & take apart Epson Expression XP Printer

[@somsims]

This video helped me fix a paper jam quickly and easily. Thank you!

[@user-oi7jt5jv6v]

How did you fixed it was there a paper mine doesn't have a paper jammed

[@stanislasbaudry503]

Thanks ! I was looking to disassemble and reassemble the Cartridge Contact Group for this xp-7100 printer. This tutorial is very useful.

[@BCHTechnologies]

Glad it helped

[@jkytown]

Is there a simple way of getting to the waste tank? Great informative videos, Thanks!

[@BCHTechnologies]

Hey, thanks for subscribing and supporting the channel! It really means a lot. I'm working hard to reach 100k subscribers - it's been 8 years, and I’m halfway there. Every subscriber helps me get closer to that goal, and I appreciate you taking the time to watch and engage with the videos. Yes, there’s a video that walks you through disassembling the XP-7100: kzbin.info/www/bejne/fF7OcoZrfLeoa9E. In the video, you’ll see exactly how the waste tank is connected to the printer, so you can avoid unnecessary steps or disassembling parts that aren't needed. It's a pretty straightforward process once you see it in action. I get a lot of questions, and it's tough to keep up sometimes, but I try to answer subscriber comments within 48 hours. If you ever need a quicker response, feel free to email me at [e-mail]. Let me know if you run into any issues with the disassembly, and thanks again for being part of the channel!

[@janeslocomb4050]

how to replace waste ink pads please on xp7100

[@klauspeter7025]

How can i change the waste ink pad?

[@boz89]

Is it possible to change the waste tank without unscrewing the whole scanner?

[@faba9722]

Hello Kevin, thanks for this video i have some trouble with my epson xp7100 there's a piece which is broken (a piece of plastic gear on the bottom of the printer that is used to engage the paper into the printer there are gear teeth that have broken) is it possible to send you the image and ask for details to know how to disassemble it whithout disassemble all the printer ;) Thanks a lot for your answer

[@darvinsparks5413]

Hi Kevin, I spilled some Gatorade in the control panel of my Epson XP-6100 and desperately need to remove the control panel so I can clean the circuit board and/or switches. The printer works from my laptop but the back light on the LCD is out and only the power button responds - none of the other buttons work. The photo black cartridge needs replacing so I can no longer print but that appears impossible to do without the control panel working. Thanks in advance!!

[@kimberleyallen-q6s]

Trying to learn from video sept 18 2023

[@pollykerd9143]

How to get rid of ink line at the top right hand corner when I scan the document. The ink line is about 2" long. I have Epson XP-7100. I manually cleaned the surface and also used the maintenance menu to clean guide line. It still didn't work. Please help. Thank you.

[@boz89]

Is there a second ink pad for borderless printing?

[@robikater3934]

Hi Kevin, I actually have a problem with the paper output tray. It starts openning but on half way it will stop and I need to tear a little bit, then it scrolls out the rest. Same when closing: I have to give a little push on half way, then it closes perfectly. Can You give me a tip, how to fix the problem? Is it possible to open the printer from the lower side to find the cause of the trouble? Thank You in advance, regards george

[@darvinsparks5413]

Hi again, well I got the control panel apart but didn't see any sign of the Gatorade so I just wiped the ribbon connections with De-Ox-It and put it back together. Still no LCD or power switch LEDs lit, and no response from the panel buttons either. It does power up when I plug it in and push the power button but that's all it does so that means the main power supply is working anyway. I put a new Photo Black cartridge in it while I had it apart but without the proper control panel sequence it didn't see the new cartridge so I still can't print anything. Help please?! Thanks,

[@justjames8383]

Accidentally plugged mine into 220v. Think I fried the power supply. What is easiest way to remove power supply or way to check the damage. Powered on then made a woos type sound and now is dead.

[@BCHTechnologies]

Get a multimeter and check on the power supply first.

[@Andreee73]

Do you have the same instructions for the Epson XP-8600? Or anyone reading this comment?

[@robikater3934]

Sorry, I repaired it already. It was a little bit of a peanut in the rail of the output tray. I opened it carefully, cleaned it and now it is working well.....😅

[@wendischepman6381]

My lcd screen stopped working on my artisan810

[@wendischepman6381]

Artisan 810 please

[@BCHTechnologies]

Ooh, good call on the Artisan 810! I’ll keep that on my radar for sure! Thanks for the heads up!

[@20thcentlimited]

Way too fast for me and too many blocked views.

[@ur3961]

SAME here. I agree. Wish he would have explained the "Guts" of the rear cover he just pulled out to set aside. What is that thin lever with the tab on the top of it for, that when pulled, swings out towards the inside of the machine? My printer was constantly getting jammed, having to take that back cover off to take the crunched paper out. I ended up buying a new printer.

[@francoisdeschamps]

On voit pas ce qu'il fait. il fout les bras devant.