This stuff is overwhelming at times. There's so many different lines. Part of me is more confused than ever, but I'm also learning from videos like this.
@Padredemanzana3 жыл бұрын
Finally got understanding of line , Thank you for the great tutorial!
@steelhead63683 жыл бұрын
That help me so much, I learned so much... all the lines out there on the market, it's so overwhelming trying to pick and choose.
@oriolrodriguez13194 жыл бұрын
Great! I've been learning a lot with your videos, they are very didactic. Many thanks, regards from Barcelona
@danlaforme98154 жыл бұрын
Nice Peter. Thanks. Can't wait for the others.
@hooked4lifeca4 жыл бұрын
I forgot to mention back when we discussed this topic that I already have some Spey line videos up on YT. They're a few years old, but they're still relevant. Here's one of them: kzbin.info/www/bejne/qWetgZaNpbasfMk
@claudiu19674 жыл бұрын
Amazing,great video , i clear my mine!!!!
@colinbeachey1966 сағат бұрын
Hi I was given an old Shakespeare rod made in the 70‘s from a relative. It is 8ft long and is AFTMA 7-8. I want to fish with poppers, bugs and terrestrials for small mouth bass. I was wondering what type of floating line would you suggest? Thanks
@miltonchurchill80404 жыл бұрын
Always great content!
@spencer41642 жыл бұрын
Thank you so much
@springteen37434 жыл бұрын
What do you think about the airflo bandit? It’s also heavy at front of the line similar to Rio gold What type of leader set up will you do with bandit line? Will I be able to cast a 12 feet leader for dry fly?
@hooked4lifeca4 жыл бұрын
Casting a 12' leader with that line should be no problem at all. I use 11' to 12' leaders routinely in my dry fly fishing. Typically I'd take a 9' 5X mono leader and attached 2' to 3' of 6X or 7X fluorocarbon tippet.
@springteen37434 жыл бұрын
I mean how long leader for dry fly presentation the line airflo river stream 3 weight?
@meyersoutdoors36673 жыл бұрын
I just got into fly fishing, and will be fishing a big river where I’ll be casting some what far with a wet fly or streamers. All the trout are 19 to 25 inches long and give up a good fight. What would be a good line to buy for what I’m looking at? Also your videos have been really helpful for me in tying files and gathering information for fly fishing. Thank you for your time
@hooked4lifeca3 жыл бұрын
For streamers and wet flies on a big river, I'd typically use a slow sinking intermediate line like the Airflo Beach Clear. As you are just starting out, a slightly overweight floating line like the Airflo Xceed, might be a better first choice from a handling and casting perspective. Here's two videos on fishing intermediate lines: kzbin.info/www/bejne/mIPMe4JpptV3bc0 and kzbin.info/www/bejne/eYDEhmChoa16eq8 Ideally you should consider having one of each.
@meyersoutdoors36673 жыл бұрын
@@hooked4lifeca thank you for the info
@meyersoutdoors36673 жыл бұрын
What leader and tippet do you think would work best for the rainbows. Fishing a dry, wet, and streamer flys on the size of river I’m fishing on
@hooked4lifeca3 жыл бұрын
@@meyersoutdoors3667 A couple of videos to help: kzbin.info/www/bejne/m3nKkGZvftZrr68 and kzbin.info/www/bejne/opmzdpKnZbqmmKM
@springteen37434 жыл бұрын
What type of leaders will you use for dry presentation line airflo river stream 3 weight?
@hooked4lifeca4 жыл бұрын
Typically I'd use a standard 9'' tapered leader and shorten the butt section to bring it to about 7' - 8'.
@springteen37434 жыл бұрын
@@hooked4lifeca thank you very much , you right . Cutting shorten butt is the way . I never thought of that. Thanks again.
@ryan898702 жыл бұрын
what is a good taper for roll casting?
@hooked4lifeca2 жыл бұрын
All fly lines can roll cast, but the longer the front taper, the easier it will be.
@hooked4lifeca Жыл бұрын
@Nicht Verstehen Only if you're casting a lot of line in the D-Loop. Under 30' of line out of the guides and there's no real difference between DT and WF.
@hooked4lifeca Жыл бұрын
@Nicht Verstehen Those lines roll cast quite well thanks to their taper.
@MrPerforations4 жыл бұрын
thank you
@Detroit3Pistons2 жыл бұрын
Can a long front taper turn over those air resistant streamers or strictly for light presentations like dry flies?
@hooked4lifeca2 жыл бұрын
It's difficult to get a finely tapered line to turn over large, wind resistant flies, especially when encountering headwinds.
@springteen37432 жыл бұрын
People not using double taper cause airflo discontinued the production of these beautiful lines double tapers. The industry is creating problems for the loyal customers that had used the products and then these companies discontinued for the sake of making it easy for new customers get in the sport and profit. Same goes with the two pieces fly rods they are discontinued and companies are making these awful 4 pieces fly rod just for the sake of money, sad.😢
@hooked4lifeca2 жыл бұрын
Unfortunately manufacturers need a certain volume of sales for a product line to keep making it. If the product sales fall below that threshold, it will be discontinued. A company can't remain in business making products that people won't buy.
@hooked4lifeca2 жыл бұрын
Forgot to mention that Northern Sports of Guelph, Ontario makes AquaNova budget fly lines for other companies. They still offer DT trout sized fly lines with nice, long front tapers for good presentation. They don't sell retail directly so their products have to be purchased through a retailer. The First Cast fly shop in Guelph, Ontario sells their lines and they will ship them.
@springteen37432 жыл бұрын
@@hooked4lifeca I know I just wanted to put t out there perhaps companies become aware that products we would love to use for ever specially ones you master the skills of the specific line or fly rods. For example I love the old airflo lines but now they are selling lines with thin diameter for long distance but not everyone fish long miles away well maybe in USA, I am a close contact fisherman and love the feel of the old lines. By the way Rio is doing the same thing and TFO also discontinued the BVK fly rods , and I would not certainly pay double the price nowadays for less quality. There for I buy cheap lines then I weld them as you do😉