Unique tips for the Heidelberg Windmill

A companion to the manual, this shows some of the unique steps for setting up the Heidelberg Windmill. A guide from Boxcar Press.

[@ajda_embro_design]

Very nice, informative video!

[@rihujin2001]

gracias por subirlo... y poder compartir este conocimiento

[@treborif]

I've just aquired a windmill heidelberg - i've run H. cylinder presses too but the windmill is my favourite. I'm the printer in my own letterpress school here in NZ. I've got the windmill, 3 ARAB treadle platens, a Furnival treadle platen and a older cylinder press. Oh, and an Intertype, Elrod linecaster and a Ludlow. Im keeping letterpress alive and passing on my skills and knowledge.

[@mcfilthymcnasty8206]

I'd sell everything and head to the Horse Track with the proceeds.. Just saying.

[@rbruce63]

Can we see samples of the work that you're printing?

[@lescarpenter162]

Loved the old ARAB, learnt to use one when I was 12 years old, I had to stand on a stool to reach into the platen lol, would not be allowed to do that today. I had to print thousands of pill packets for a pharmaceutical company, their small size and close to the edge printing could not be put on the Heidelberg. The money the printer gave me was pretty cool for a school boy. I remember his warning " For goodness sake don't get your hand caught in the platen as there's tons of pressure". He really wanted me to treadle the machine which was too awkward so we ran the machine on the electric motor. There was another machine alongside, I think it was called a Cropper. When I was in the Royal Navy I visited Singapore and while walking down a street I heard the familiar sound of a hand fed platen, I asked if I could have a go and the owner was reluctant to let me take over, but I did for a while much to everyone's amazement. Happy Memories, I never forgot how to feed the machine.

[@SimonRef]

We operate a Platen and a Cylinder for Cut, Creasing, andKiss Cutting regularly,the Business couldn't operate without them..From Platens,to Six colour U.V,and Infra Red, Large Format Litho Printing,back to Letterpress.I also run a Two Colour Komori Sprint.Hull uk

[@andrewbeck5547]

make a video about how you set up the cutting and creasing please

[@SimonRef]

@@andrewbeck5547 Unfortunately the business closed June 2020.

[@jaimeraulsiquibachevalenci2544]

Saludos desde Guatemala, hermosa máquina, uso una similar, aquí hay poca facilidad de tener piezas de la máquina para hacer todo tipo de trabajo hay que ingeniarse las cosas para cumplir, pero que buena explicación

[@walter3449]

EN QUE SITUASION SE USA LOS REGISTRO GRANDE Y PEQUEÑOS: y en cual de ellos en normal registrar. Gracias.

[@luisherrera-ih2nl]

good video, thank, other more please

[@amilasuresh4618]

This machine is very good. I had work. foil & die cutting

[@saratatv2705]

very good bro, so can you help me i wane to know more about die cutting and foil please my email [e-mail]

[@wynkindeworde6504]

Naughty boy - you should never use an ink knife to put ink onto the large chrome distribution roller, you will scratch it! Don't they teach you youngsters nothing nowdays!

[@missso0oso0o12]

I can see that you didn’t use cnc plates could you please tell me how you do this Selecon plate

[@adriangomezquezada5069]

Está bien bueno el vídeo con la ayuda para hacer andar la máquina, pero te faltó enseñar a emparejar las paletas para que no tengan variación de calce. Saludos desde Chile de parte de un amigo retirado ya de esos menesteres.

[@MohamedSayedIssa]

I Used this machine really very good from egypt

[@frakturobsession6044]

Mohamed Sayed Essa انت هنا 😂

[@frakturobsession6044]

Mohamed Sayed Essa شكلي هجيبها وهفكس للأنتيكة اللي وريتهالك

[@marioislas8207]

Alguien podría indicar donde puedo tomar un cursó de capacitación para esta máquina me urge

[@debbY100]

The music is extremely distracting. Why do you put music over these videos?

[@exploringlifefam3274]

Whats the value on this? Really cool stuff

[@richardnordenberg3005]

I've been in printing for 90% of my working (40) years and have recently convinced my shop owners to set up the H. Windmill that's been in storage for several years. Cleaning, oil & greasing is being completed and some minor repairs are being done. I am reluctant to get the power to it until they find (or buy) manuals (operation and/or parts) to use as reference. They also have (2) H. Cylinder presses I currently run (without manuals also). All of these 3 machines are dedicated to Die-cutting.... not inking up to print. I do not like running these machines without manuals and have not had much luck locating any. It's been a long time since I've run a Windmill and do not want to cause any damage. These youtube videos are helpful but are no substitute for a manual. Any source suggestions out there? Heidelberg is a big "no help" on this.

[@mcfilthymcnasty8206]

Just stick to what your doing and let the Men Folk do the rest.

[@user-rl5bh1sq6f]

Has house air been used on a windmill

[@johnybrougham]

Oh to find a printers in the West Midlands UK that still use platens I am 49 and to did my apprenticeship on platens love them dearly wish I could get back into this kind of work

[@mcfilthymcnasty8206]

Lean to drive a truck... you can thank me down the road.

[@denissift6455]

Can anyone help please. i changed the steel plate on the head of the tiegel now the presure on the bottom is waay too much anth the preasure on the top is way too little. the plate is the same as the old one. Whats wrong? :(

[@mehryar78]

Denis Šift you can control perssure by adding paper at back of steel plate

[@andressanchez7178]

quien me podria ayudar con el manual de uso y partes de esta maquina, por favor.

[@socorrojuarezluna216]

Yo compre una grafopress es una gpe y no la e podido hechar a volar por varios pess y tengo el manual completo de la maquina pero dicen k es el mismo que hizo la heydelberg pero se fue a checolovakia va hay me dices y dime donde estas yo en la ciudad de mexico. Saludos

[@wilarguello1598]

Linda herramienta igual que Grafo pref (así se escribe?). Dios es impresor!!!

[@yassinbelhadj9623]

Goood

[@amithe3986]

Can I print 44GSM paper cover with this machine...??

[@dancerman1138]

Yes with caare setting up pile height and blow critical I used to run airmail which much be similar weighs

[@lsierra95alba63]

estas maquinas son muy buenas y faciles de manejo y poco molestan cuando trabajan , soy operario

[@luiszaldivar4086]

sabes q estan utilizando en este video para la impresion de las flores y las letras veo q la base es transparente

[@atubero]

@@luiszaldivar4086 Es un fotopolímero. como si fuera un sello de goma que puedes reposicionar.

[@luiszaldivar4086]

@@atubero Gracias .... estoy en Sinaloa Mexico como podria elaborar ese fotopolimero?

[@juancarlosantolin7066]

Hay máquinas especiales, pregunta a tu proveedor.

[@wolfy9005]

Then you get stickers to kiss cut and it takes all day because they were printed digital and the stock is wavy as fuck an nothing you do helps it run...then you walk in the next day and it runs perfect.

[@yeahman365able]

how to fix the speed gauge on the machine ,it is of

[@dancerman1138]

What is wrong with it. to fast to slow what?

[@wynkindeworde6504]

You should be putting in the correct packing before starting to print - with the impression backed off and slowly brought up to kiss the stock. The description of adjusting the feed and the pile height is not the best way to do it. Also twisting the feed to get register is not the best of ideas as it alters the amount of stock held by the grippers and can lead to feed problems, it's best to start with a plate in the correct alignment. This platen may have wear on the bed but a well maintained machine should have even impression over the entire bed if the packing is correct - it is after all not a clam shell platen; it is a toggle action.

[@mcfilthymcnasty8206]

You can bet that fell on deaf ears... Huh ? What ? Clams for lunch !

[@gary49er1]

Get a life

[@mcfilthymcnasty8206]

@@gary49er1 There's the right way and the wrong way. Trouble is everyone worth a shit is dead or retired. Pay attention to the above comment and you might lean something Jr.

[@gary49er1]

@@mcfilthymcnasty8206 learn how to spell

[@mcfilthymcnasty8206]

@@gary49er1 oh my.. the spelling police ! Hey Gary FUCK YOU.

[@aliembaye6498]

merci pour les cours mais si nous pouvons avoir la version française ces mieux

[@toniyoussef4362]

Nice 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷

[@kevlandy]

Takes me back to the 1970's when I ran these, In the UK they were known as Heidelberg Platens. I worked with a chap who had a scar on his forehead where the windmill had caught him at high speed.. - I'd love to have a play on one, just for old times sake.

[@logicalnotes5007]

Stupid me, once the wing slightly scratched my forehead. Or maybe I should say, lucky me.

[@akka354]

In Melbourne Australia they dont teach letterpress enymore all litho

[@altamiradorable]

I can see they don't teach English spelling either !

[@mcfilthymcnasty8206]

Anyone worth a fuck is dead or retired . The Ass Hat's are in charge now.

[@MrAndyPhoenix]

Windmill!! It's a platen

[@stewballs7]

I agree a windmill is a big building for grinding flour and has FOUR vanes not TWO gripper bars, idiots

[@DhirendraSingh-sn8xg]

Kattn

[@wilarguello1598]

Solo en países en pobres arruinamos esas herramientas por comprar mimeógrafos, tales que no sirven y sistemas offset que vinieron (vinieron) echos chatarra.