Universal CartuneNZ Link ECU single plug wiring loom. Monsoon or Atom

This is an example of a Link ECU loom which can be used with either the Link Atom or our preference the Link Monsoon. It comes with relays , fuses , new 2 channel ignitor. It can be upgraded to include oil pressure only or the combo oil pressure with oil temp sensor and also upgraded to have the fuel pressure sensor. All looms are hot tested on our workshop engines , can be used on either gen 1 or gen 2 non vvti engines.
We do similar looms for Link with Coil on plug COP and for Haltech ecus
For current pricing email [e-mail] please include the details of your engine and whether its LHD or RHD vehicle.
The Cartune Company (2003) Ltd in New Zealand does 1uz and 3uz conversions / parts and wiring. We have been working on UZ Toyota V8 engines since 2004 when we did our own Hiace van to transport dirtbikes around NZ. Since then we have swapped to doing mainly just Lexus V8 work from a family owned farm hidden away in our paradise , surrounded by the NZ native bush. We sell parts and simple to follow wiring instructions for the 1uzfe engines. For enquiries email [e-mail] Take Care. Kelvin

[@des9913]

thank you kelvin for all the info you put out.

[@kotzeepe1]

1uzfe vvti starts runs is at working temp when switched off and then try to start again it only cranks dont start

[@kotzeepe1]

Need help please im in south africa no one have an idee

[@s.a.i.v]

Wow i need this

[@ogmeth1234]

Wow, this is very nice.

[@charliecavanagh4609]

What do you charge to do this set up?

[@CartuneNZ]

Price depends a bit on some of the extras but if interested flick.us an email and we can discuss it

[@malevo8132]

How can I buy it ?

[@CromwellKuutsipowerboy]

Hi Kelvin. Lovely channel i love it!! Planning to boost my 1uz ucf20 (1995-1997 non vvti). Since you have seen many such builds i realize you the best to answer question. I plan to upgrade rods to HBeam, bearings to ACL, cosmetics gasket to lower CR and will be running ecumaster standalone. I m planning mild boost levels of between 6psi to 14psi max. Would you say stock pistons on ufc20 are up for the task on boosted a uz? Thanks

[@CartuneNZ]

Personally if I took the time to pull an engine and fit other goodies I wouldn't be refitting stock pistons. Your choice though. Cheers Kelvin

[@CromwellKuutsipowerboy]

@@CartuneNZ Thanks for the advice Kelvin.

[@swingking08]

Definatly the best in the business . What would you do different and which ecu would you go with for a boosted build ? And would you do ecu loom combo like this for them 91 soarer Going 2 g25-660s 1000cc Injectors ect Would there be any other mods you could recommend also by chance . Or can I email through some enquiries ect

[@CartuneNZ]

I prefer sequential injection for a boosted build so those big squirters can be controlled a bit better. Twin knock sensors and then twin widebands. Im happy to lay out a package for you. [e-mail]

[@swingking08]

@@CartuneNZ awesome as, I will email you this afternoon once I knock off work, if anyone would be able to help me it's Definitely you, and aus isn't all that from haha

[@qaisbarre]

Hello, I need your help, I put the 1uz engine on my Audi Q7, everything looks good, there is a problem with the rbm, I can't get it to work and this is causing the problem of the car lift system not working, do you have any ideas about that, thank you

[@CartuneNZ]

I would be ensuring the RPM signal into the stock system , which is possibly canbus is input as so the stock ecu thinks the engine is present and outputs the correct signals to the car.

[@bvward]

Kelvin, one box engine management! Looks easy when you do it. Are you getting paid in maple syrup? ;)

[@CartuneNZ]

yep , this one is nice and simple. Pretty much this this the same system we use for all our one plug ecus. The main engine part of the loom is all the same , with the difference at the ecu plug itself. I could do with some proper maple syrup, instead of the fake stuff we see here.

[@jrortiz3333]

How much for a wire loom like for 1991 ls400

[@CartuneNZ]

I'd need a list of specific details before I can offer an estimate

[@jrortiz3333]

Can I get ur email or contact information

[@liamfranklin946]

Is a a340 tcu available?

[@CartuneNZ]

I have videos using an aftermarket ecu ti control both engine and transmission. Check out my zephyr series. Cheers Kelvin