Unlock pcr 2.1

[@galimcan06]

What is unlocking for? To load the map I edited and make it work accordingly in the vehicle?

[@webpro607]

did you still recommend Kess? or there is a better tool these days? Also, did you rework the chinese clone?

[@danielgatan4196]

Now i have ori tools...i use kess too for old ecu is good tool!

[@galimcan06]

I don't know which pin is for this, can I do this via OBD2? The tool appears to be partial.

[@danielgatan4196]

You can do obd...but only after unlock

[@galimcan06]

@@danielgatan4196 I can read, I get the file, my friend, I write, but the tool does not work accordingly.

[@galimcan06]

@@danielgatan4196 If it's locked, won't it read or write?

[@zaharel91]

Salut! Pret pentru deblocare?

[@isenberg1187]

How power you put on your ecu (volt/A) ? After the unlock you remove the 470 ohm solder on your ecu for start the engine ?

[@danielgatan4196]

I use 13,5v and 2 amp...after unlock remove resistor and put on car...then you can read/write obd

[@TermoneenyCC]

@@danielgatan4196 Thanks for this video, After I have applied the patch I have checked the ID and it still says the ecu is locked:? have you come across this before:?

[@83554]

Thanks Daniel, just what I was looking for

[@diaperastikos]

Exactly what I was looking for. Thank very much.

[@jesusHchrist09]

What exact resistors did you use? I know they're 470 and 1kohm but what power supply voltage? 12V?

[@danielgatan4196]

Hi! I use 470 and 1kohm resistor ...and i use 13,5v for this ecu. I have adjustable power supply max 2 amp

[@samozvanecc]

@@danielgatan4196 Hi, why you use resistors in there? is that because it says in KESS manual for this type ECU?

[@danielgatan4196]

@@samozvanecc Yes.

[@norprosomproducoes48]

After the unlock do you have to write the epprom again?

[@danielgatan4196]

No..just unlock in bench and then you can read/write by obd.

[@nicolaelovin5998]

salut pretul?

[@michaeljames7810]

Once unlocked can you read and write over ODB in the car yes?

[@danielgatan4196]

Yes, only unlock on bench...then read/write obd

[@viridian6903]

@@danielgatan4196 if i dont unlock can i write a modified file throught boot

[@danielgatan4196]

@@viridian6903 No

[@alpayrecep7528]

for what is unlocking

[@prattandwithny]

nice

[@cheflupo9079]

👍👍👍

[@MisteRCSGO]

Kess is a china clone?

[@danielgatan4196]

Yes.

[@cristianbartolone3709]

Hi link power supply?

[@denisracu4303]

👍

[@derabgaryan3197]

PCR 2.1 EEprom Unloker 1.0 Free for you

[@viridian6903]

Which its beter to use unlocker sw or kess