Updated Front Valance for the NBS Yukon (New Lower Lip Added)

Updated Front Valance for the NBS Yukon (New Lower Lip Added)
Parts Used
Valance amzn.to/38dKCxc
Lower Lip amzn.to/3ymX74g
Fog Light Housings amzn.to/3MW1UxB
Fog Light Bulbs amzn.to/3kWQ5Ln
Chrome Caps for License Plate Holes amzn.to/37r6yo5
Tools Used
Drill amzn.to/3vTKiwt
Silicone amzn.to/3Fo14XT
Panel Tools amzn.to/3xAN4Z0
Clip Removal Tools amzn.to/3JP3Oy8
Screw Drivers amzn.to/3KRf6Dp
Gloves amzn.to/3LedK5n
Other Parts Used on This Yukon
Throttle Body amzn.to/3MV2goS
Throttle Body Gasket(if needed) amzn.to/3ubQXjy
Wheels ebay.us/6GEVP0
Tires amzn.to/3L68sbW
Key Fobs Used amzn.to/37tyeZb
New Screws for Roof amzn.to/36bbuwI
Paint for Wipers amzn.to/3vmlT1j
Wiper Blades amzn.to/38Yy5hc
Short Antenna amzn.to/3KWxwCA
I know it has been a few videos since we worked on the NBS GMC Yukon but between my Son using it and me daily driving it has been a struggle to work on it. In this video however we put a brand new GM Fog light Valance on and add a lower splitter or lip to it. I really think the lower lip makes it look so much more aggressive. While we have all that apart I add new fog light housings and led fog light bulbs to the Yukon. Not only do the led fog lights perform better they look more modern as well. I am sure you noticed from the picture or thumbnail but we also removed the billet grille. It had to go. Follow along as I show you how to remove the lower valance or plastic from your GMC Yukon or Chevy Tahoe. The replacement of the valance or plastic is easy to do if you take your time and makes a huge difference in the look of your SUV. In this video we also take a look at the front pitman arm and idler arm to see what all needs replaced during the lowering process. Hit the Comments and let me know what you think.......
Thanks For Watching!!!!
Subscribe and Follow TWA Motorsports
KZbin: / twamotorsports
Instagram: / twamotorsports
Email: [e-mail]
Video Equipment used to make this video(Need to update)
Gopro Hero 9 amzn.to/2Of60Z0
GoPro Mount amzn.to/3pf1HvX
Gopro Session amzn.to/2IZprAp
Video editing amzn.to/2NawHtz
Photo editing amzn.to/2NawHtz
As Always Thanks For Watching!!!!!!
Do this at your own risk. For entertainment purposes only
SUBSCRIBE FOR MORE VIDEOS!!!!
Disclaimer:This video and description contains affiliate links, which means if you click on a product link, I'll receive a small commission.

[@xokoy.]

Loving the videos & I appreciate your attention to details. 🔍

[@TWAMotorsports]

Thank you

[@thezambranos2973]

Thank you for the great video and for getting to the point! Your explanation was right on subject. Thank you sir!!!

[@TWAMotorsports]

Thank you

[@danorourke5184]

It’s looking a lot better. I have always wondered what the deal was on that extra lip, I remember when those where new and occasionally you would see a Tahoe with one, always thought they looked good but never looked into it, thanks now I know!

[@TWAMotorsports]

Yeah they should have used it on all of them.

[@marksalisbury1132]

love the lip and the fogs. great idea on the silicone!! Ty

[@TWAMotorsports]

Thank you. Lip makes for a more aggressive look in my opinion

[@jewllake]

On my 06 Yukon I used eagle eyes fog lights and i'm very impressed with the construction, they even feel heavier than the original "autosystem" GM brand. I bent the bumper flange, used spacers and oblonged the holes on the plastic fog lights to get them to sit perfect in the valance. Also, since the fog lights have no splash shield in the back of them your front tires can splash a lot of water pressure on the back of the LED heat sink and water will seep through the heat sink and lead wire into your fog light.

[@TWAMotorsports]

I will check them out in the future.

[@19donnie77]

Man you are a life saver i been looking to do the same thing to my yukon adding that lower lip for about a year or better now i went to a dealer to get the parts but did not any luck because they go off of the VIN and i could get any help from the parts dept with parts # was even told that it would not fit my year so i kinda gave up until tonight now that i seen your video i will be changing my for sure keep the yukon videos coming i watch them all BTW i have the same year make and model and color "pewter" which lower lip did you go with there are a few of them don"t want to get the wrong one

[@TWAMotorsports]

Thank you. Glad I could help. Definitely looks better with it in my opinion.

[@moisesapardue3214]

I love the videos man 🔥🔥

[@TWAMotorsports]

Thank you

[@Chris-ux5nl]

Thx for the vid definitely doing this to my 01 Sierra

[@TWAMotorsports]

Glad I could help

[@danielhibbard2391]

Great video man

[@TWAMotorsports]

Thank you Daniel

[@clandestinerobot14]

The billet never looks right on these IMO good call!

[@TWAMotorsports]

I agree

[@ChevyAddictLLC]

Watching your videos make me go find a suv . I might have one finger crossed 🤞🏿

[@TWAMotorsports]

Good luck

[@ChevyAddictLLC]

@@TWAMotorsports thanks bro I’m will drop video on KZbin Wednesday after the radio stop

[@TWAMotorsports]

Awesome

[@rodrigorocha9752]

Black and chrome gmc grille emblem 🔥 i plastic dipped mine 2 yrs ago on my 09 nnbs Sierra no chips yet 👍🏽

[@TWAMotorsports]

I may plasti dip to see if I like it.

[@rubenr7650]

I like how the front end looks like from far away. I would change out all the front suspension if your changing out the idler and pitman arm

[@TWAMotorsports]

I am changing almost everything actually

[@rubenr7650]

@@TWAMotorsports that's good.

[@TWAMotorsports]

All but steering box lol

[@gerardoesparza8650]

Dammmmm it my Yukon looks awesome 🤩

[@jewllake]

were you the previous owner?

[@gerardoesparza8650]

@@jewllake no I’ll be the future owner lol

[@TWAMotorsports]

Lol

[@azg4724]

looks like u also need the idler arm bracket thats the one were the idler arm goes onto it also gots a socket looks like it has play u might want to double check that. good work

[@TWAMotorsports]

Bought the whole thing

[@josephscisson5253]

Dope!

[@TWAMotorsports]

Thank you

[@corymiller7770]

Love the vids and i think an all black grill would look nice on it

[@TWAMotorsports]

All black does look nice I think

[@corymiller7770]

@@TWAMotorsports yeah with the emblem all black would tie off the front end nice

[@TWAMotorsports]

I may try it.

[@mikeh3511]

SEM Color Coat in Landau Black. It lasts. I did my Avalanche cladding w it 2 years ago and it is still as black as it was when I first did it. It’s amazing stuff.

[@TWAMotorsports]

I may have to check that out.

[@mikeh3511]

@@TWAMotorsports I tried many products on these plastics and this is by far the most superior solution I've found for keeping them looking black. It has not faded, chipped, or flaked at all. It's more of a dye than a paint. I recommend it to anyone changing color of plastic or protecting the cladding and keeping it looking black.

[@TWAMotorsports]

That's awesome

[@keilylmm6377]

Nice video on the Yukon front Lower valance with the chin spoiler to allow more air into the radiator...the color difference is factory from GM.. I like the original look and yes the billet grill had to go... 👍

[@TWAMotorsports]

Thank you. Definitely looks better without the billet.

[@keilylmm6377]

@@TWAMotorsports good night and I'll hit you up tomorrow on Instagram on my lunch break...

[@TWAMotorsports]

You too. Probably won't be on ig much.

[@rodrigorocha9752]

The lip made it 10x better

[@TWAMotorsports]

Thank you. I agree

[@AlexLopez-kp1wf]

Yessir, love when nbs content is being pushed out. Gotta change that grille tbh

[@TWAMotorsports]

Thank you. Yeah grille is coming out

[@alexgomez3050]

03-07 Sierra front end on a Yukon would be cool! I believe its just a bumper and grille.

[@TWAMotorsports]

And cutting of frame horns.

[@markb3129]

Removing the billet grill was a no brainer.. personally I think they make a vehicle look cheap. Lol. ✌🏻

[@TWAMotorsports]

I like it on some but definitely better without here.

[@adamgatton]

Factory is the way to go on grilles, imo. I used the KYC brand lights, per your suggestion, and I love ‘em. But I wanted that factory amber. I’m not sure on a good brand for clears.

[@TWAMotorsports]

Yeah tyc is the best replacement for factory in my opinion

[@jstone150]

I usually try to go with TYC also, I’ve decent luck with Anzo here lately.

[@TWAMotorsports]

Yeah wish tyc made a clear.

[@Raulm96]

I’ve used autozensation on my cat eye for headlights & fog lights never had a problem with them

[@TWAMotorsports]

Thank you. I will check them out too

[@Ron_Masterjohn]

I have a 2002 Suburban 1500 LT and want to order and install one of those lower front deflector lip. Anyone know which one I need to buy and if I need to change my valance?

[@bdtaylor1979]

Any time I replace headlight housings, I apply a bead of silicone around the joint where they are glued together. I had one leak before.

[@TWAMotorsports]

Definitely good idea.

[@Chris-ux5nl]

Red or black on the grille emblem would be nice

[@TWAMotorsports]

I think red for now but eventually black

[@danieltre007]

I have that same lower lip on my 05 Tahoe. It looks good. I bought aftermarket OEM fogs for mine and they shake a lot. Let me know how those work out for you.

[@TWAMotorsports]

It does look better. Fog lights do have some shake I noticed.

[@mhyatt82262]

I would go with the original RED GMC emblem on the black grill. That’s what I did for mine and it actually looks like a new Yukon. I don’t like the honeycomb grill. The black standard issue grill looks good with red GMC.

[@TWAMotorsports]

That is what I think I will do for now.

[@67judge]

I’d get the original grille and paint it gloss black with a new solid red GMC emblem. And the surrounding part of the grille chrome. Paint it body color to match.

[@TWAMotorsports]

I definitely want to keep the chrome

[@arnoldblackburn8459]

Would you happen to know if this would fit on the 05 sierra with round fog light valance

[@TWAMotorsports]

Doubtful

[@angelc7984]

Do you know if you can move the bumper front and backwards?

[@TWAMotorsports]

Not easily

[@angelc7984]

@@TWAMotorsports is there an adjustment?

[@TWAMotorsports]

Not much. Mostly left and right

[@masterintelligencemack348]

How much would you charge to rebuild my 04 yukon?

[@TWAMotorsports]

Don't have time to

[@txsricardo]

Hey I bought a after market air dam valence and it’s not snapping onto my 05 lower valence

[@TWAMotorsports]

Probably shouldn't buy an aftermarket one I guess

[@txsricardo]

@@TWAMotorsports I made some cuts and it git

[@TWAMotorsports]

👍

[@camarofan8460]

Does the lower lip fit on the 99-02 sierra

[@TWAMotorsports]

If you have the right lower valance

[@camarofan8460]

@@TWAMotorsports I have the factory one

[@TWAMotorsports]

Only fits 2005 to 2007 classic stock valance

[@camarofan8460]

@@TWAMotorsports is there a version for the 99-02

[@TWAMotorsports]

If you buy a valance for 2005 and up.

[@alexesquivel6520]

The front grill is $388.00 Plus tax from GM

[@TWAMotorsports]

Cheaper for me

[@hg5.337]

How low are you going?

[@TWAMotorsports]

Probably around 3/4-5

[@hg5.337]

What kit are you going with

[@TWAMotorsports]

Never use a kit. All individual parts I like.

[@AlexLopez-kp1wf]

Nvm i just seen it taken off😂

[@TWAMotorsports]

👍

[@johnkelly4043]

Drop that bit$& and it’ll look great.

[@TWAMotorsports]

Coming at some point

[@kevinparlo4014]

editing would be awesome, good videos, very informative, just too much talking and basically thinking to yourself out loud

[@lee.guynes]

Take off the side steps 🥴

[@TWAMotorsports]

Not happening. Lol

[@kevinparlo4014]

bro you have to stop talking so much, blah blah blah blah

[@TWAMotorsports]

Thank you for the input. Do you by chance have a channel so I can get some pointers?