Updated Toolbox Tour for 2020

Updated toolbox tour for 2020. Bubblegum had some organizational updates this year so what better way than to show off how i have her set up.
Scott Seidl: / scottseidl1
Justin ATV: / @justinatv
Dave, If Its not Broken Fix it: / @ifitsnotbrokenfixit1193

[@ashlandgunclub1000]

Tool cart yes spend the money on snaopon or matco, tool box that ends up being mostly storage US General is fine by me.

[@BeardedSeabee82]

Too true on just needing storage, and it is what works best for you that matters! thanks for watching and hope you had a good weekend!

[@johnb1121]

So sad but true...

[@prevost8686]

Ashland Gun club If that works for you that’s fine. My philosophy is a little different. Years ago I committed to my boxes being the best built that I could afford so I spent the money. My reason is that when I purchased my boxes I intended for them to last my whole career , hold thousands of pounds of tools , and withstand being moved on rollbacks/trailers numerous times over a 30 year period. They’ve stood the test of time and will be passed down to my son one day just like my dad’s Mac boxes were passed down to me. I really don’t care for the huge roll carts that have been the trend over the last few years. My shop has two bays. One with a lift and one a flat bay. I’m never far from my main boxes so all I really want in a cart is about three drawers with the basics that I know I use repeatedly. Obviously, if I worked in a huge shop that required me working a long way away from my boxes I’d prefer a larger roll cart.

[@everydayfleettech2286]

Great video! I’ve said it many times before, most techs can get by with a good cart instead of buying a big tool chest. 👍

[@BeardedSeabee82]

THanks Chad, and too true, you can do quite a bit with one bigger cart and a smaller roll around for every day stuff. Hope you have good weekend bud

[@MidwestToolReview]

It was nice to see how well organized you have bubble gum. I just purchased a vintage MAC mb75 and I’m in the process of restoring it. I’m going to drop a vid on that project tonight. No need to have a gigantic box in all situations; you can still have a great setup with a tool cart!! Forgot to mention; check out my vid on the MAC box and let me know what you think!

[@BeardedSeabee82]

I do need to get caught up on your vids, but for some damn reason, you and several others youtube still not notifying me when those vids come out. dunno why. thanks for watching and hope your weekend was good and cant wait to see end result of restore!

[@Jame440]

dude that color pink is killer i love it!

[@BeardedSeabee82]

Lolol, thankyou!!!

[@BruceLyeg]

I love long toolbox tours. Lots of great tools packed into that cart! I'll check out Scotts channel

[@BeardedSeabee82]

THank you Bruce!

[@ifitsnotbrokenfixit1193]

Super excited for the compressor to kick in. It would not be a Bearded seabee82 video with out it.

[@BeardedSeabee82]

typical, here for the compressor, stay for maybe a tool or two lolol. Thanks dave, hope youve been doing good today

[@gregblau8082]

Great tour. I just rearranged to use my jamestown cart as a roll around. It’s a little big for getting around the shop so I’ve had it stationary and been working out of my old harbor freight cart. I kept adding to it until it was overloaded and inefficient then decided to give the big one another shot. I have a locker with most of my specialty tools, an old top box that’s pretty much all spare bolts and supplies then less used tools are in the old cart. I’m thinking about bringing in my old plastic cart for fluids and quick jobs cause that was the original plan for the hf and it just accumulated tools until it was full

[@BeardedSeabee82]

Good input on how things can go sometimes, and thank you for watching

[@johngibson3594]

That guys tool box is freakin great man is definitely creative

[@BeardedSeabee82]

He truly does have one hella set up, shows that alot can be done with just a little bit of ingenuity, hope yall are weathering out this storm alright.

[@ianloyd6384]

I’m actually a big fan of Channellock as well. I still have some Channellock brand pliers and cutters that belonged to my father 30 years ago. Can’t really argue with that, right? Lol

[@AdriftAndAtPeace323]

Awesome vid as always, and it’s the 27mm for def filters.

[@BeardedSeabee82]

Thanks michael for watching! hope that youve been well, and knew it was one of those two. 27 is also the size i know for pinion nut on truck i used to have. thanks for the reminder (shop for watever reason doesnt believe in changing DEF filters, one of the things that drives me nuts)

[@NickPixelTV]

Between you and CP i almost want to buy a new box lol. Nice video my friend!

[@BeardedSeabee82]

LOL Thank you Nick! Yeah the carts can be packed plenty full, CP sure is fine example of how overstocked used to look with that matco cart he had, although now his new cart coming along nice!, Thank you for watching and keep up that awesome work you do with your videography! (it puts mine to shame)

[@CPthetooladdict]

Looking awesome!! Thanks for the tour!!!

[@BeardedSeabee82]

Thanks Bud!

[@Toyotas_n__Tools]

Love snap on pliers, I need to get the wire strippers and the little slip joints you have. You got the best stuff you can get very nice bcb!

[@joeybarth3121]

Checked out Scott channel wow its awesome so is bubble gum brother keep them coming

[@BeardedSeabee82]

Thank you Joey! hope you had good weekend and good week so far! thank you for watching!

[@austingoleman9431]

Worked for Halliburton its amazing what drivers and use that word loosely can break wreck and blow up

[@Toyotas_n__Tools]

haha I love my snap on ratchets too! That one you got from tarek I don't get to use it so much, and I seem to grab the non locking 1/4" thlf72 and 3/8" compact thlfc72 over the thlx72 locking models for some reason.. I picked up the longer gearwrench soft grip 1/4" locking model to replace the other one I had =)

[@ifitsnotbrokenfixit1193]

Thanks Bearded love me some toolbox tours.

[@billbeckett1021]

I was just looking at a Snap On box like yours in red. The Mac dealer has the same style box also. After comparing the two I think the Snap On is a better built box. If I keep buying more Capri tools I might have to buy myself one of those beautiful Snap On boxes.

[@BeardedSeabee82]

Thanks bill, and yeah sometimes they do have some killer deals on these carts, especially if they get one in that is an off color that no one wants to buy right off the bat, if sits around too long they want to get it moved one way or the other.

[@toolcartel4213]

Great tour. Thanks for sharing I made it all the way through. Although I had to break it up in a couple visits lol

[@BeardedSeabee82]

lol, all good bud, thank you for watching do appreciate!

[@felixf5211]

A very nice setup. It reminds me that I really should pick up a set of fractional swivel sockets. Hopefully shallow. Envious of the SO punch/chisel set. Would love to have one. Excellent quality steel and heat treating. IIRC, SO files are made by Bahco. They're good. I use files daily; pretty particular as to the quality. If someone is interested in good files, at this point in time I'd only consider Pferd, Bahco, Grobet, and NOS Nickolson. ATM, Nickolson is made in Mexico and Brazil. IME, the Brazilian files are a bit better, but no comparison to Nick US files.

[@BeardedSeabee82]

Yup, SO are the bahco, but have been happy with them past couple of years now. Have a couple old us nicholsons i keep in my box at home, but yeah when i went to fleet farm couple years ago when was looking at better files with 10yr warranty right before i bought those was looking close to same on cost for US or german ones. As for chisels, well, they still do get warrantied from time to time (bearing race splitting hard on them) but they are good set for sure (lucked out had matco usa made set was able to trade on them). thanks for watching bud hope your weekend was well!

[@Toyotas_n__Tools]

I just sent Dave a set of those long picks got a sweet deal on them.

[@BeardedSeabee82]

he will like them for sure, and yup regular snap on pliers and that extra long 1/4 are darn good indeed, things come in handy removing ecms off trucks. thanks for watching doug, hope things goin alright for you this week!

[@kevingrover1925]

This mechanic hates truck drivers. Stupid drivers equals job security

[@BeardedSeabee82]

🤣👍 too true

[@BeardedSeabee82]

Although epa makes sure we have plenty to fix too, but i hate epa more

[@theheavywrench9549]

Thanks for the tour great selection 👍🏻

[@BeardedSeabee82]

Thanks for watching bud!

[@charlesabbott5563]

Hey Mr. Bsb, the last 2 company driving jobs I had before going o/o we were not allowed to even change a bulb, we couldn't evem install our own cb's we had to have the company mechanics do it for us. They said it was because of the electronics in them.

[@BeardedSeabee82]

lol. I understand some companies as far as getting into more wiring or leased vehicles, but we have had guys tag out trucks for the whole weekend just because they wouldnt (more so than couldnt) change out a bulb even when during indoctrination they are shown where bulbs, wiper blades, and fluids are for during after hours. I dont know how many guys out there are incapable of refilling a coolant, oil or washer jug though during the weekend on their own that run through our shop here. I understand if your company has different regs, thats on the company, but we only run one shift in our shop. thanks for watching and input though, do appreciate

[@hondaguy425able]

I never thought I would say this but that pink box looks nice something different.

[@BeardedSeabee82]

That it does lol, Thankyou!

[@ThecrazyScotsman]

cool brother long vid but well worth it I really like those widgets I need to look em up

[@BeardedSeabee82]

lol, yeah wee bit, thanks for watching bud! I do have plans sometime for doing different wrench setups. Nice thing about widgets is they are vet owned and operated here in US.

[@wayneshanks148]

Awesome tool box and tools brother

[@BeardedSeabee82]

THank you Wayne!

[@AntonioClaudioMichael]

Nice updated tour

[@BeardedSeabee82]

thank you antonio!

[@greatbay1961]

You have 1% of your tools you use 99% of the time and then you have 99% of your tools you use 1% of the time at least that how it goes with me, lucky to use my jigsaw twice a year but its there when I need it.

[@BeardedSeabee82]

Lol, with some tools i am right there with ya on minimal use (some specialty tools/sockets) and anything ive not used either goes to toolbox at home or if i dont use it over course of year gets sold. But for most part theres prob 20-30%that gets used daily or weekly depending on which type pf truck rolls into shop and what service/repair it needs. Thanks for watching!

[@blueheeler2608]

Great Video- lots of money sitting there

[@BeardedSeabee82]

thank you, and well, turning wrenches for past 12 years things accumulate over time. but yeah, some things can be spendy

[@megadethguym7977]

My friend has that green box in his tire shop bin paying it off for 3 years still lol

[@BeardedSeabee82]

lol, yeah those epiqs arent cheap

[@joshuarivera7622]

My Matco guy doesnt show up either, smh. I have a ton of broken tools he needs to exchange. Especially my swivel sockets I use damn near everyday.

[@BeardedSeabee82]

Yup never good thing when dealer doesnt show up to take care of customers

[@joshuarivera7622]

1/2 drive to 3/8 3ft locking extension. Brand and where, plz? I got non locking and they are getting wore out. But still under warranty.

[@BeardedSeabee82]

Snap on/Blue Point USA, iMSfxL33 is part number.

[@joshuarivera7622]

@@BeardedSeabee82 awesome thanks for the reply!!!

[@BeardedSeabee82]

No problem

[@tommater2724]

That’s how the top rolls

[@BeardedSeabee82]

lol too true, no sense in gussying up for that indeed, it gets used to say least lol.

[@danmckevittstoolsbagels3258]

Shit probably my favorite video.

[@BeardedSeabee82]

lol, thanks dan!

[@nevillepretorius8948]

Very cool tour dude 👍👍

[@BeardedSeabee82]

thank you!

[@rpatrick2]

I think I have one of those Williams ratchets from WW2. Super beat up but works well.

[@BOHEMIANHUNTINGCLUB]

Pretty nifty setup👍

[@BeardedSeabee82]

thank you! hope spring been going ok yalls way!

[@aaronmcclain1279]

Bearded seabee 82 . I'm not a mechanic . Just machinist . I have a gearwrench extendable prybar . And also a estwing hammer guy.

[@aaronmcclain1279]

I have a video on my cart it's not a snap on . It's a HF 5 drawer. If you need a good laugh.

[@aaronmcclain1279]

kzbin.info/www/bejne/gXOniq2ZoNSfr7s

[@BeardedSeabee82]

do like the aero and cmmg stickers you got on there, as long as your setup works for you thats what matters most!

[@aaronmcclain1279]

@@BeardedSeabee82 thank you for your service. I was a contract armour for army for a short hitch . My other box has a lot gunsmith tools in it.

[@jeepthingsoutdoors1973]

I have tool envy!

[@BeardedSeabee82]

lol, yeah, everybody loves pink lol. Thanks for watching johnny!

[@heavymachinery2843]

Great setup sir

[@BeardedSeabee82]

THank you!

[@Jolsen002]

This is almost as long as a brew review and I didn't even get any cowbell.

[@ThecrazyScotsman]

Or WHISKY!!!!

[@BeardedSeabee82]

Sorry, cowbell got runover, and whisky was in cupboard at home waiting for me to hurry the hell up filming this vid to get back to it lol. thanks for watching hope yall doing well

[@patcb829]

Awesome set up Brandon. Really enjoyed the tour.

[@BeardedSeabee82]

Thank you Pat! hope youve been well!

[@elliottkarabrannon4676]

Sir there is nothing wrong woth your set up i worked on farm equipment with a craftsman 3 stack all my tools were snap on harbor freight and Napa

[@BeardedSeabee82]

Thank you elliot, and thank you for your input, My dad still has an older 1992ish 2 stack from craftsman he uses at home. As long as it works for you who cares what others think

[@elliottkarabrannon4676]

I like the harbor freigjt pro ratchets there hard to beat the tool box don't make the mechanic i was taught by my dad and alot of other mechanics i just have a good mechanical mind sir i don't do it for a living anymore i just work on my own stuff

[@blacksmoke5009]

Thanks for sharing 👍

[@BeardedSeabee82]

Thank you for watching!

[@michaelmangino9819]

Love the Pink cart! I had a GT Performer bike that color when I wAs a young lad! Did you get it for a better price? Or was it a favorite color of yours?

[@BeardedSeabee82]

Thankyou. The snap on dealer had the cart for quite some time and was looking to sell it pretty much at cost so i was able to get great deal on it almost half off of list price, was too good of deal to pass up. Thankyou for watching

[@kevincampbell8298]

I am a DiyEr. Started off in the biz but after a short stint at a dealer I said screw this. Still do all my own stuff and family 35 yrs later. Love having different makes of things. Have some upgrading to do. What is your impression of the olds tools screwdrivers? I am looking at them. And why a pink box? Nothing wrong with it. I would get one and put my moms name in it. She is a 3 time cancer survivor... :-)

[@BeardedSeabee82]

Still getring feel for olsa drivers just veen using them few weeks now. Set wise i think could be bang for buck competitor but more time will tell. Aa for pink, well, got menards 54" box at home needed something for here, they had hella 1/2 off deal on it and thought what the hell. My mom as well a cancer survivor, but have had cancer take several aunts and uncles and couple gra dparents as well over years... not to mention color annoyed hell out of guys i work with lol.

[@dennisrieger1508]

I've tried a tool cart before ,not my cup of tea ,if I'm going to the other side of the building and such I have just my 100.00 dollar cart a open cart ,I'm old school I have a big tool box ,the reason why is cause I don't have room to push a cart like that around ,I am a body tech and the cart can be in the way when you have big car parts laying around new and the damage parts

[@BeardedSeabee82]

Hear you on the need for having room when doing body parts, kind of like that when we have to do hood replacements or engine front crank seals, big parts everywhere always can make things awkard. thanks for watching and hope you had a good weekend

[@BuiltOverBot]

Thanks as much for the link as the video

[@BeardedSeabee82]

I know you just showed up for the air compressor, dont kid yourself now lolol. Thanks Rob!, hope you had good weekend!

[@BuiltOverBot]

@@BeardedSeabee82 it is the star of the show after all

[@BeardedSeabee82]

damn air compressor....lolol

[@johngibson3594]

I like you pink tool cart you don’t see them everyday they are rare. Real men aren’t afraid of pink

[@BeardedSeabee82]

LOL too true john, real men have pink toolboxes lol. Thank you for watching bud, hope weekend went alright for ya

[@Tailgatesntoolboxes]

awesome

[@BeardedSeabee82]

thankyou!

[@johnb1121]

Are your floors flat ?

[@MrJcray]

Nice

[@BeardedSeabee82]

thank you!

[@dereksmith5551]

The box doesn’t mean nothing the main thing is quality tools and what you can do with your hands I work with a guy has a Mr. big 12 foot long box paid $46,000 for it and he’s always asking me questions how to do something

[@BeardedSeabee82]

Then that guy isnt worth shit. Quality of the mechanic isnt what this is about, price comparison of what you can get from tool truck vs what hazard fraud offers vs say extreme toolboxes however is big dofference

[@dereksmith5551]

@@BeardedSeabee82 I was paying you a complement it doesn’t matter you work out of a tool cart and the guy has a big box it doesn’t matter it matter what tools I could go to Harbor freight and I’d still be the head tech at the dealership I work at

[@icemonk12]

Nice setup🤘🔧🍺🍺

[@BeardedSeabee82]

Thank you!

[@Justin-xm3uz]

Hi! Great video! I was curious were you a seabee mechanic or?

[@BeardedSeabee82]

Started off in navy as cti, pissed someone off and became an abh, then crossrated to cm in the bees

[@Justin-xm3uz]

@@BeardedSeabee82 that's awesome. I went to A school with the bees at port hueneme but I was AF.

[@BeardedSeabee82]

You ever hear of a senior chief or master chief named Rainwater?

[@danymitehazard]

What profession requires more tools, being a diesel mechanic or just a regular mechanic?

[@BeardedSeabee82]

In my experience probably diesel, i use sockets sized from 1/4" clear to 4" sockets, and 6mm clear to 42mm. But then there are also specialty tools for mercedes, other brands etc that may require more.

[@danymitehazard]

@@BeardedSeabee82 is being a diesel mechanic harder than being a regular auto mechanic?

[@BeardedSeabee82]

Parts are heavier amd larger, but knowledge wise it can be a coin toss between the 2. A BMW car for example has well over 20 ECU's(electronic control units) while a semi has (depending on model) 5 to 7ish.

[@davidpinnix7446]

Sorry just not good without the compressor! Lol! Keep up the good work!

[@BeardedSeabee82]

always about that damn compressor... lmfao!!!

[@timestes7090]

Hey Seabee, East or West coast? Twenty year SW

[@BeardedSeabee82]

Was abh and cti for 8 uears then went cm in reserves to nmcb 25 out of ft mccoy wi. Did lil bit of time at nbvc/hueneme

[@T6Tarek]

You should be getting a package next week, it won't have any name besides yours.

[@BeardedSeabee82]

Will be keeping eye out

[@BeardedSeabee82]

And thankyou!

[@cortlanmorris1363]

What roll cart do you have?

[@BeardedSeabee82]

It is the krsc43 is the model

[@tommater2724]

What’s the spelling on the sun new toe pliers lol please

[@tommater2724]

Or link

[@T6Tarek]

They are tsunoda pliers, they are Japanese and haven't found a bad product yet. Not to mention there price is generally pretty amazing.

[@BeardedSeabee82]

Thank you tarek! And yes tom those lil flush cutters work awesome and they have full line up of other pliers as well, the poly jaw ones work good on holding nylon airlines without damaging them and for grabbing harness plugs that are tight.

[@T6Tarek]

I ordered you a new 32mm wrench please throw the Pittsburgh in the scrap bin.

[@BeardedSeabee82]

Ok i promise, straight to scrap barrel

[@T6Tarek]

You'll be doing the world a huge favor. 🤐

[@BeardedSeabee82]

🤣👍🇺🇲

[@T6Tarek]

Do you get ups or fed ex at the shop just out of curiosity no certain reason 😜

[@BeardedSeabee82]

Ups shows up i know lol

[@SgtJoeSmith]

Hello Mr Seabee! Would you like to be a guest on After Dark with Joe Smith in the near future? Please email Joe Smith. It's on about me tab.

[@BeardedSeabee82]

Will have to try and see, will depend on date/time

[@SgtJoeSmith]

@@BeardedSeabee82 Friday night's 8 central 1 HR. If you got opening later in month or April send email with date and will save it for you if not claimed already. We can talk about whatever you want. More about you and your life or current events or share funny stories. Or you can sing if you want. It's a variety talk show. So your fans and others can learn more about you and who you are. And promote your channel. Thanks

[@BeardedSeabee82]

we will try to work something in, poss beginning of april. do appreciate your understanding, thank you!

[@jessiecong9095]

We are Chinese manufacturer for ABS tool box and aluminum truck box

[@BeardedSeabee82]

Well, we are hard on tools, toughest make it through review process. Up for challenge?

[@jessiecong9095]

@@BeardedSeabee82 PM to me

[@BeardedSeabee82]

@@jessiecong9095 my email is [e-mail]