UPGRADING + CRAWL TEST! 1/18 Scale FMS FCX18 Toyota LC80 RC Car- Injora Rims + 62mm x 22mm AT Tires

  Рет қаралды 2,453

The Next Level RC

The Next Level RC

Күн бұрын

UPGRADING 1/18 Scale FMS FCX18 Toyota LC80 RC Car with Injora Rims white spoke 1” beadlock wheels with a 3.78mm offset + 62mm x 22mm AT Tires. Straight to the point of how the tires perform in my 1/18 scale mini crawler course, pretty much maxing out the tire size for this truck with-out lifting it higher with longer suspension, it rubs a little when turns fully and under shock compression, it didn’t seem to bother it too bad when I was crawling it would rub a little, but nothing major, a huge improvement over the stock FMS tires, filmed with iPhone 15 in 4K.
#fms #rccar #rccrawler

Пікірлер: 21
@natestapp5573
@natestapp5573 2 ай бұрын
Nice course...some nice scenery plus some fun and uniqe obstacles!
@Thenextlevelrc
@Thenextlevelrc 2 ай бұрын
Thanks,I appreciate that👍👍 I just add crawler courses into all the landscaping, makes the most of the yard😁😁😁
@carloshnunez
@carloshnunez 4 ай бұрын
Very nice you did a good investment 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@Thenextlevelrc
@Thenextlevelrc 4 ай бұрын
Thanks!! so much more fun to drive. It just makes it everywhere I try to take it.😁😁😁
@RubenVieira-EXKRC
@RubenVieira-EXKRC 4 ай бұрын
awsome rigs man nice run great video👌👍💪 subded👍👍
@Thenextlevelrc
@Thenextlevelrc 4 ай бұрын
Thanks for that 👍👍 glad you liked it 😀😁
@fishNhodl
@fishNhodl Ай бұрын
That looks and performs great! I just ordered the blue one for my 3yr old son and can't wait to get it! What are all the mods you've added that you would recommend? So far I ordered a full metal transmission and injora metal drive shafts. All other gears should already be metal in the latest V2 version.
@Thenextlevelrc
@Thenextlevelrc Ай бұрын
Thanks it is awesome👍👍 you should be good if you ordered the metal transmission. Your three year old would strip out the low gear if it gets hung up on anything with the plastic gearing. Only upgrades I had done on the truck is the rims and tires which make a huge difference. I bought the stainless steel driveshafts that I am going to add on when I switch my transmission gearing. my low speed gear is stripped and does not crawl at all right now. I still have to order gears or a whole transmission. What transmission case and gear did you order?
@Antonio-qd4jm
@Antonio-qd4jm Ай бұрын
It's spectacular, a question friend, do you think you could send me the link of where you bought them and what their names are? Thank you in advance
@Thenextlevelrc
@Thenextlevelrc Ай бұрын
thanks for checking it out👍👍 it is so much better with the tires than stock ones….here is the link copied off my Amazon order from Canada INJORA 1.0 Beadlock Wheel Tires... www.amazon.ca/dp/B0BNBB64CL?ref=ppx_pop_mob_ap_share Hopefully that works, if not on the Injora Website you can buy also, it was much quicker getting on Amazon and might’ve even been cheaper too, in the description it says all of the details about the rim and tires too!😁😁😁
@jimbo4203
@jimbo4203 4 ай бұрын
It looks killer , I would just Dremel it a little bit
@Thenextlevelrc
@Thenextlevelrc 4 ай бұрын
Yeah, it is awesome now, such a big improvement in looks and handling. I’m gonna use it for now as is… if I do Dremel it, it would be just the very corner of the fender. The screw that holds the wheel well is right on the same spot😬😄😁
@Quuvvo
@Quuvvo 4 ай бұрын
That’s so strange. I run a 64mm tire and it looks wayyyyy smaller than your 62mm. Would you happen to know if the FMS is smaller than the wplc54? And if so by how much I’m very confused lol
@Thenextlevelrc
@Thenextlevelrc 4 ай бұрын
The WPLC 54 is a 1/16 scale. The FMSFCX 18 is a 1/18. Yeah, the Land Cruiser is a little bit smaller therefore making them look a little bit bigger. No need to be confused.😁😁😁
@Quuvvo
@Quuvvo 4 ай бұрын
@@Thenextlevelrc Thank you I knew something was up I appreciate the response. I love the scale look on the fms but my c54 wins my heart since its a bit more functional
@AKseries1
@AKseries1 4 ай бұрын
Are you using foams inside?
@Thenextlevelrc
@Thenextlevelrc 4 ай бұрын
Ya, just the foams that came with them
@AKseries1
@AKseries1 4 ай бұрын
@@Thenextlevelrc it performed really well man 👌 clean look
@Thenextlevelrc
@Thenextlevelrc 4 ай бұрын
⁠@@AKseries1thanks, I’m super happy with it, a huge improvement over stock!
@JoshuaFisher-wf3dc
@JoshuaFisher-wf3dc 4 ай бұрын
What shocks u running still stock or different ones
@Thenextlevelrc
@Thenextlevelrc 4 ай бұрын
Thanks for watching😁 still stock shocks adjusted a little bit stiffer on the front, it doesn’t really rub under its own weight. It’s only when I press on it with wheels turned it rubs, leaving it as is for now 👍👍
They Just Keep Raising The Bar! FMS Model FCX18 Toyota LC80
11:19
RCDriver_Online
Рет қаралды 50 М.
Redcat Scout 18 vs HPI Venture 18
12:19
Exocaged RC
Рет қаралды 10 М.
진짜✅ 아님 가짜❌???
0:21
승비니 Seungbini
Рет қаралды 10 МЛН
번쩍번쩍 거리는 입
0:32
승비니 Seungbini
Рет қаралды 182 МЛН
SLIDE #shortssprintbrasil
0:31
Natan por Aí
Рет қаралды 49 МЛН
Drifting the RZR 800
4:08
Milo420
Рет қаралды 92
Most Realistic mini RC Car EVER!
16:57
Kevin Talbot
Рет қаралды 538 М.
Weighted Beadlocks on my FMS FCX18 LC80.
14:45
Quinn’s RC
Рет қаралды 3,4 М.
A man is building a unique all-terrain vehicle in a garage!
17:13
Made by Madman
Рет қаралды 1,2 МЛН
It went a lot further than I thought it would. FMS FCX18 Review
23:46
Scale Builder's Guild
Рет қаралды 28 М.
FCX18 Custom Suspension Mods. Huge Performance Gains!
11:16
Havik Hobbies
Рет қаралды 17 М.
진짜✅ 아님 가짜❌???
0:21
승비니 Seungbini
Рет қаралды 10 МЛН