Upgrading Everything Brakes and my Harness Bar - GR Yaris Project

[@WillEgby]

Do YOU Use Street Brake Pads or a Trackday Setup like mine?

[@dave_R_GR]

Your Harness is mounted wrong. Schroth e.g. says, if the mounting point for the harness is more than 45cm away from the seat, the harness must cross before the seat for safety. Furthermore, a strutbar is not constructed for taking those forces in case of a front impact.

[@lastexile1187]

He hasnt a clue. Just a rich kid with a fast car doing clickbait youtube videos

[@kevinDG7]

Well next year want to replace the brake disc and pads for EBC. Think go for a setup for mine Mini for more street brake

[@WillEgby]

Maybe that's coming...

[@Paul922]

2 years that I have one, that the track and snow! The only thing I don't like is the Nitron shocks for the track! I will definitely put ohlins

[@miyagiracer]

hey, that is really dangerous how you mount your harness. the first solution is criminal, and the cusco bar is not better. both are not for harness !! why you not fixing the harness to the belt fixing points from the rear seats ? this is the only correct point for harness when you don´t have a rollcage

[@WillEgby]

Hi. There have been tons of changes since this was filmed so don't worry! You are correct. 👍

[@steffydog]

Awesome 👏

[@tracktimevideos5164]

Good to see you've moved away from that dangerous harness setup but what you have swapped it with is barely any better. That is a strut brace, it is not a harness bar and should not have harnesses attached. Also EBC pads are crap.

[@WillEgby]

I think the harness bar is very secure now. As for the brakes, you will be hearing more about them in future. I may have come to the same conclusion...

[@NigelsModellingBench]

Hi Will. i get my GR on Tuesday.. subbed to you and shall enjoy following you.

[@WillEgby]

Have fun with it! It's an amazing peice of kit. Thanks for the support. 👍

[@Emf50]

How many litres/bottles of brake fluid did you use?

[@WillEgby]

I bought 2.5 litres which has done me for about 3 bleeds. I believe the system is about 400ml. To flush out the old stuff and do the first bleed, we used about 1.25 litres.

[@Emf50]

@@WillEgby get 3 (1.5 litres) bottles just in case