It's pronounced urea, as in urine. Been using in trucks for years
@DriveWayRay3 жыл бұрын
Thanks for setting me straight it’s the first time I’ve ever come across it and that would make sense as it’s a manufactured type of ammonia. Thanks for watching 👍
@parvejansari72443 жыл бұрын
Even after pouring urea, the warning light is still burning and the reggae of urea is also not showing plz help me.  Even after pouring urea, the warning light is still burning and the reggae of urea is also not showing plz help me. 
@DriveWayRay3 жыл бұрын
Couple of things. You could of over filled it. Or the system level sensor I’m not sure if it’s actual name is faulty. If you have filled it don’t put more in you need to get Hyundai to plug their computer in and check that sensor
@JM-gp4nd9 ай бұрын
Seen this today mine came up on dash saying check urea system any idea what that means?
@DriveWayRay9 ай бұрын
Check your levels. If it’s showing your levels are ok you need to check the adblue injector. It gets blocked by crystals and need cleaning. Its on the drivers side of the exhaust and can be taken off and cleaned with out lifting it off the ground
@JM-gp4nd9 ай бұрын
@DriveWayRay it also came up saying incorrect urea detected. Now the EML warning lamp has come on dash.
@JM-gp4nd9 ай бұрын
@@DriveWayRay how do you clean with minimal tools at your disposal.
@JM-gp4nd9 ай бұрын
@@DriveWayRay my levels are OK the sitting at half a tank of adblue.
@DriveWayRay9 ай бұрын
@@JM-gp4nd the injector is in the side of the exhaust like an o2 sensor. If it’s a right hand drive it’s on that side roughly level with the edge of the door. You don’t need loads of tools you can squeeze under without lifting it of the ground but to make it a little easier lift that side or the front middle. Take the injector out if the end is covered in white crystals that’s your problem. Clean them all off and don’t forget to clean where the injector sits in the exhaust as that also clogs. These crystals stop the spray from injecting a certain amount in a certain pattern into the exhaust to turn the gasses more into a h2o type liquid that you have probably seen dripping from your exhaust if your sat idling in your drive for a while and the sensor further down the exhaust reads your emission values and that could be the reason