USB plasma ball teardown and schematic.

[@ross302ci]

When i was a kid I had one of these with a setting that would make it "dance to music", where it would basically turn on in the presence of enough sound. I found out that if I hummed constantly so that it would be on, then touched my lips to it, it would shock my lips. I'm still not sure why. I love these things.

[@mostlysane77]

Commenting 4 years later :-) I found out years ago that if you balance a coin or metal object on the top of the globe a spark will jump from the top to your finger and burn you within a few millimetres. Alternatively if you place your hand on the globe then holder your finger near someone else a spark will burn you both. If you instead hold one leg of an LED and touch the other to the coin that will also light. and further if one person touches the globe and then hold one leg of the LED and another person holds the other leg the LED will still light. Great fun with Plasma globes!

[@LucasGarrow]

When I was about 10, I remember setting a metal pocket knife on top of one of these and touching/drawing off a modest spark which burnt through paper. As I did this, the wireless door chime was 'activated' from the other side of the house. This makes sense now.

[@pearz420]

Every since I was a kid I've found plasma globes very soothing and fascinating. I never got around to finding out how they worked. Neat video.

[@RK-1956]

The very 1st plasma balls I saw was back in the early '80s at an art exhibit. It was quite large, about 18-24" in diameter. And cost around $2700. It's amazing how cheap (low cost) and small these plasma balls are today.

[@carlyonbay45]

Really enjoy these videos and your voice is almost hypnotic and very grounding . ..... and then you pull out the felt tip pen and notepad for the schematic - brilliant .

[@jpm000001]

Finally a video that actually explains how these things work, thank you!

[@JopardBDS]

Thanks for doing this one Clive. I've been making custom housings for exactly these plasma globes for a few years now. I've not touched the electronics just stripped off the black plastic shell and replaced with my own. It's good to have a little more understanding as I hope to be a bit more experimental shortly with the same globes but different casing materials. In some ways it was quite fun listening to your assumptions on the internals when I knew what was inside

[@syclone]

When you have no idea about electronics but still enjoy these videos

[@JVerschueren]

In the hallway of my former highschool, there's a picture of me holding a lit full size fluorescent tube, drawing a massive arc from a Tesla coil we excited via a spark-gap cascade. Physics class was fun in the 80's.

[@gwesco]

In the mid-sixties, my HS era, we had a Van De Graff generator as well as a Tesla. It was great fun to form a human chain and touch one then have someone touch ground. Probably legislated away now for "public safety."

[@randomvideosn0where]

We had one in middle school, but got it taken away for making a human chain standing on books and shocking people in the hall that walked past.

[@JVerschueren]

GoogleMinus we did this to people in our class who didn't realise the styrofoam was there for a reason. :D

[@ChristopherWeaver1]

Well know I want a video of you guys doing it

[@ChristopherWeaver1]

I hate using this small ass screen

[@Bchulo88]

oh my god ive been waiting for this exact video since i was three and fell in love with plasma balls. amazing vid good job.

[@aaronbrandenburg2441]

As she would say the the construction was similar to a light bulb with the right is on one can build a DIY plasma globe that uses a light bulb as the globe I'm planning on doing one eventually once I can find a suitable flyback Transformer. Harder and harder to find a black and white flybacks nowadays. Sure I could cannibalize a security monitor or something one of these days. Or maybe when those little black and white portable TVs or perhaps a Boombox with a TV in it who knows. Maybe they should have driver kits that could do this stuff that would have a signal Transformer 4 experiments like that of course legality of that is kind of a?

[@marcse7en]

Hi Big Clive! ...... Little Clive here ...... again! 👍😂 These USB Plasma Globes are sold at ARGOS for £15.00, but mine was less than £7.00 direct from China via eBay! A set of Duracell Rechargeable Ni-Cd batteries lasted about 3 hours! As the batteries discharged, the streamers reduced in numbers, to practically nothing! Very underwhelming! 👎😂 My USB Plasma Globe is externally identical to yours, but different inside! The PCB is screwed to the upper case moulding, and on the top it has the transformer and an electrolytic, and on the bottom is a tiny surface mount transistor, and four other tiny surface mount components (resistors and capacitors). I cleaned the inside of the electrode tube, to stop streamers going into the base of the globe! I don't think people realise that the electrode is on the OUTSIDE of the globe, because it looks like it's on the INSIDE!

[@mizdebsk]

I was watching this with this bulb plugged in to my computer's USB... not anymore. Thank you for saving my PC:)

[@imajeenyus42]

That's an amazingly simple circuit - I'll keep these in mind next time I'm after a HV source (or at the very least a transformer). Another interesting circuit is automotive HID igniters - they've got a little HV cap, spark gap and pulse trigger transformer to ignite the xenon bulb.

[@techmouse.]

Your videos are always so informative. This one taught me the right way to draw a lightening bolt!

[@erwinslootweg7938]

Looking into plasma balls for a prop, i stumbled upon these "usb' globes. Thanks for answering the "can i pull this thing apart without breaking it ?' ! This is going to be great!

[@JopardBDS]

I've been doing just the same for years. A doddle to pull apart. The worst but is getting the glass bulb out from it's rubber like O ring but not that bad as the glass feels pretty thick compared to say old incandescent bulbs. If you can I'd recommend pulling said ring from the hard plastic mounting (easily done) and using that as the interface of the prop for the physical mounting

[@mattedwardsvintageelectron7754]

the older plasma balls had a flyback transformer simlar to what you find in those cheap japanese black and white CRT tvs with the built in radios

[@arbutuswatcher]

Speaking of Plasma Balls, & how they affect sensitive electronics..... I recall working at Radio Shack back in 1991, as a summer job, between my Junior & Senior Year in High School. We had a Plasma Ball on display on our counter, nearby our cheapest digital wrist watches. Some curious customer discovered that holding the face of the watch against the glass of the energized Plasma Ball would 'zap' the wrist watch. To our manager's dismay, pulling the batteries out of the watch & reinstalling them did not restore life to the watch. After that, the Plasma Ball got move to a safer location, far away from anything else electronic! :p

[@JamesPotts]

"Things you really shouldn't plug into your computer." That's a video that I _really_ want to see!

[@BedsitBob]

I tried to have cybersex, but the USB port was far too small.

[@mitch19636]

@@BedsitBob LOL

[@MadScientist267]

They don't make enough computers to demonstrate them all

[@aaronbrandenburg2441]

Yep that would be a good video. And then show after effects of doing that what it could do to a computer. There yet playlist of After Effects of funny things like that and I'm sure there are a few videos out there for like that or at least sections of repair videos regarding that. Not just USB port stuff but others as well or other equipment related to computers and run things being plugged that use some work connectors but different things going through them! Such as things that might have 24 volts are more on the same pinza something that would take about five or less. Yep d-sub connectors sometimes that'll do! Sort of like those USB decorations that well and those little USB vacuum cleaners that pole way more power than you should pull from computer USB! I saw at least one USB device once that melted a cheap USB extension! This is Fire 2 high speed charging! The current at 5 5 volts on the USB was over 3 amps for some reason still can't wear white was but you should have seen the size of that cable going to the USB plug! More look like a heavy duty extension cord than USB! What were they thinking! Oh and on that playlist and what not to plug into computer don't forget the USB killer! What next USB bug zapper! Actually I'm surprise we've not seen that from big quiet for anyone yet. Maybe it exists for just haven't seen it yet but sooner or later! I'm not just talkin about little night-light size thing I'm talking about football bug zapper like you'd hang outside that's a few feet tall. By the way good source for the nice high voltage Transformer! Once I tore one down it was an old one surprise filament winding vacuum tube rectifier didn't think it would be that old! Couldn't find any labels on it anywhere I'm probably long gone but yeah that exists! Once I saw one that instead of regular fluorescent ballast for the fluorescent tube there was actually what look like a ballast tube for a Old School radio. Even in an 8-pin tube/ relay socket About the point in this video where you guys are referring it sort of reminds me of ashens even tone of voice Etc for some reason don't know why

[@MadScientist267]

@@aaronbrandenburg2441 Simmer down now 🤣

[@hairypaulmm7wab195]

I have had loads of fun with plasma globes over the years & found most operate between about 15 to 25kHz. Some of the larger ones have produced quite strong near field RFI from around 10 to 80kHz.. (with spurious emissions across LF and lower HF HAM radio bands) If you run one above 100kHz you will find the larger current flow can burn your finger pretty quickly when the plasma arc is attracted to your finger on the globe. : Note: Placing a grounded electrode (I used a handy bit of 4mm CSA copper wire) on the glass it can heat the glass to melting point quite quickly! But this tends to end badly for the plasma globe. Enjoying your videos. Have fun Sir! :-)

[@AdhamOhm]

These plasma globes haven't changed much, though they've gotten smaller. As a kid in the 90's I had an "Illuma-Storm Junior" from Radio Shack. As the name implies it was a smaller version of the original Illuma-Storm, but it was still bigger than the ones they make now. The cool thing about the Junior was that it had an Edison lamp base so it could be plugged in to any lamp socket, and you didn't have to use the stand it came with. I had mine in my bedroom's ceiling lamp for years. :)

[@RayMerrell68]

Just pulled an 8 inch on of these out of the skip at work. Plugged it in to an spare 12v power supply and it worked straight away. :)

[@ZachFromIT]

Had me dying when you mention the switch was live. Handled like a boss.

[@gustavgnoettgen]

I had one and the glass broke after I put a penny on top of the glass as an electrode. I wouldn't have done that if I knew that I could just pull off to reveal the sturdy wire from the transformer. I used it as a lighter and to melt sand and salt grains onto larger beads which was fun. If you run the arc right at such grains they eventually heat up enough to conduct electricity so well that they heat up a lot, enough to melt.

[@SoundSoCollective]

Bigclivedotcom & PhotonicInduction Make the best electronics teardown videos ever!!!!

[@aaronbrandenburg2441]

Absolutely the best. Speaking of photonicinduction does anyone know that if he's back to doing videos I heard about that wall back quite a while that is but haven't thought the check recently hope things are going okay with him in his channel of course

[@Thereisnosp00000n]

I remember buying a bigger variant that connected to the mains. Couldn't have it in the same room as the computer and clock radio, it made them go haywire. And it was so powerful it actually hurt touching it more than a couple seconds.

[@AllLoudNation365]

Plasma globes run at around 30-50kHz depending on the globe. I made one myself with a potentiometer to vary rhe frequency from 5kHz-60kHz.

[@StuShoots]

We used to put foil on top and you'd get an arc to your finger, much like a bug zapper!

[@cassi75474]

If it has a jamming effect, the US Military should place these by enemy comms equipment, make things a lot easier.

[@Plan-C]

"Takes me back to my youth of playing with high voltages at high frequencies" 🤣🤣🤣🤣🤣. Love it! What could possible go wrong lol

[@3dprint-tech787]

Now you have al the ingredients to make a flame projector, a high voltage source and the solenoid air freshener

[@PilchPlays]

Had one of those. Plugged in a 9V Wall Adapter to it. The wall adapter would actually put out 12V to 15V depending on load. Made the thing glow really well. Anyway the EM coming off of it killed my wireless keyboard. Always fun to put a layer of aluminum foil on the ball and try to touch it. Gives you nice little burnt pin pricks on your hand where the arch of electricity came off the foil.

[@BaronSamedi1959]

no house is a home without one!

[@stuc.6592]

Well I started this playing and my wife then began talking at me, so I took the headphones off and looked away. Looked back and wondered what on earth were you drawing?? Headphones and a rewind made sense of things, thankfully.

[@phils4634]

Anyone remember the big one of these in the UK Science Museum (1970's?) I think it was about 3 feet or more across, and the "lightning bolts" were pretty spectacular. They also had a BIG (4 ft diameter) Whimshurst Machine, and the inevitable Van der Graaf - so plenty of sparks and arcs!!

[@somon90]

I had so much fun with my old plasma globe when I was young, I covered the globe with aluminum foil, making a little spike at one end that I burned grapes and other stuff with. I shocked myself a number of times and burnt holes through my nails. I wasn't a very bright child.

[@aaronbrandenburg2441]

You might not have been very bright but the arcs probably brighter than you would have maybe

[@icesoft1]

Funny, I was just typing a question on whether that circuit would drive a neon tube single-endedly (just as you pulled that neon tube out). Several years back, I made an argon-tube light-sabre (30-36" long) with a similar power supply to drive the tube 'single-ended' to make the sabre extend and retract out of the handle. Cool stuff, thanks Clive!

[@Andrew_Erickson]

This makes me think about building an entire room in my house with neon bulbs across the ceiling excited by HV power supplies

[@ChristopherWeaver1]

Science project here I come

[@aaronbrandenburg2441]

Actually at one time there was a predecessor to the fluorescent lighting system that sort of work that way except except larger-diameter glass tubes white neon tubes excited by high voltage. The interesting thing is the system was not sealed completely. And your ass was admitted through means that it would allow certain gases through it was quite complicated but it actually work pretty well from what I understand. Also the first Mercury lamps were essentially single phase Mercury Ark rectifiers but being used to produce light. And surprisingly enough they could even work on DC. But for the time that was pretty ingenious. Unfortunately don't have any links to anything on this but it does come from reading. This is mentioned in some Google books as well if anyone's interested. But good luck finding it I don't even know if anybody had mentioned on KZbin at all couldn't find much back when I first looked into it years ago

[@SuperAWaC]

i will never forget the unique smell you get when you sneeze on one of these while it's running

[@vivimannequin]

SuperAWaC what?

[@NeuronalAxon]

Ozone?

[@beachcomberbob3496]

I once tried to generate this effect in a long, valve shaped container, but could never find the right components that were small enough (that transformer's the particular devil) to go into the hand-held device, nor could I draw a decent enough vacuum in the tube whilst trying to introduce the exotic gasses. Challenge issued!

[@VVerVVurm]

Clive try putting your solar desk calculator near it. If you find the right distance and let it sit there it will endlessly display random numbers and do all sorts of operations.. Years ago I used to freak out/annoy my coworkers by hiding such a globe under their desk and placing his calculator or his office telephone above so that the lc displays showed endless and weird activity. ;-)

[@FixUntilBroken]

Imagine when usb3 gets popular and devices like this have the full power of the usb3 spec.

[@sideswipe147]

lol the naration was absolutely brilliant... "I think we need to reverse engineer this. be back in a moment."

[@Jedda73]

There used to be a huge plasma globe in the local museum when I was a kid. I used to prank unsuspecting people by putting a coin on top and watch them try to remove it.

[@ChristopherWeaver1]

Used to? ITS GONE?

[@SigEpBlue]

On the surface, it seems like a rough load for USB ports to handle, given its operating current, the noise, and that rather large filter capacitor on the input. I think I'll stick to my mains-connected neon transformer. ;) Thanks for the teardown, Clive!!

[@ThomasGrillo]

Fascinating. Thanks for the look inside a plasma ball.

[@TheFlyingScotsmanTV]

Cool. Stu here ( and not American ! ). Good advice about not having close to stuff....I have now removed it from sitting next to my laptop :-(.

[@no-expert]

Awesome! I remember wrapping mine in tinfoil to get the sparks out and you could actually draw on it on the outside and burn paper with a paper clip. It was like magic, my favorite toy for a while :)

[@rogertopful]

What would happen if you raised or lowered the voltage going into the globe? Could you modify the board to allow a varying range of intensities or would it just stay the same?

[@SootySweep22]

rogertopful pretty sure you can drive them with much higher voltages. Photonicinduction has done a few videos where he does just that.

[@jameslmorehead]

I have one of these from a US supplier. Have taken it up to 12 volts. Much more than that and the little transistor gets too hot. The brightness and number of streams does change

[@marcse7en]

Some globes do have controls to vary the effects produced

[@Mitchell_is_smart._You2bs_dumb]

well I was using AA batteries in it and wondering the same thing. i pulled one out and attached a 9v and it was very bright and activate. for about 4 seconds. its dead now, i came here for a heads up on what to replace, and I have no idea

[@mellowfish316]

I remember getting one of these as a kid. I used to set gum wrappers alight with the arcs (and burn my fingers with arcs quite a bit too)

[@aronswets1939]

I have this EXACT ball too. It's working good and definetely worth the money. I bought it for only €13,99.

[@TheCORC964]

I’ve got an 8” one and it kept me amused for about an hour, I want to get it refilled with a nice xenon/krypton mix like some of the cool display tubes you see for Tesla coils etc.. maybe neon and iodine would look nice too

[@Siryn]

I had one of these back in the 80's! I learned early on to never place a coin or tin foil on the globe and touch it. Nasty shock and a burn.... LOL!

[@aaronbrandenburg2441]

I think they say something about that in the manual I believe and even sometimes on some warning label that might have been missing for one doesn't think to read either one. Sometimes rtfm is better in the first place if one doesn't know maybe one would know if that happens. Remember in a science museum there was a big sign on the big plasma globe about that very thing not bringing metal objects within range Etc. Of course I was standing there someone did it and learn the hard way

[@BlancoDevil]

I've rigged one of these to a DIY transcranial direct current brain stimulation device. Works well...

[@KarlA-vk4kn]

Awesome video Clive! I've just bought this Plasma Globe after seeing this video! Where can you get the mini flyback transformer?

[@BedsitBob]

If you touched the end of that heavy red lead, would you get a big shock from it, on the lines of what you get from a car's spark plug lead?

[@lovemy89240]

The innuendos in this video are strong, naughty naughty Clive!

[@MajorMalfunction]

It's ribbed for her pleasure.

[@zlac]

I'd like to see this overclocked with something like a car ignition coil

[@BrokebackBob]

Oh by the way if you have one of these going, kiss your home wi-fi goodbye while it's on.

[@SeishukuS12]

I have a plasma globe exactly like that, only it's got a clear blue base! You can buy computer memory modules with these things built-in to them... Perfect for those sensitive devices! *rolley-eyes*

[@southjerseysound7340]

I love when you do the high voltage hf stuff.But man you aren't kidding,these transformers are very tough to wind for a novice.Although admittedly I've just been taking shots in the dark trying to get where I need to be. It'd be cool if you did some more stuff along these lines though.

[@ragnor0k]

Damn, I used to have a plasma ball when I was a kid. Now I want one again!

[@zambonidriver42]

You need a sound effect. “I think we need to reverse this, I’ll be back in a bit”. . And the diagram appears. 😂

[@johnrobinson357]

Clive i loved those when i was a young lad, always wanted one. Passed one up at a yard sale last summer for $5. Silly me.....next time.

[@AsymptoteInverse]

I used to have a plasma ball that ran on (I think) 12VDC out of a wall brick. One day, the cat knocked it over and broke the globe. Good news for me, because I think I had more fun playing around with the high-voltage high-frequency board inside than I did with the globe.

[@SkuldChan42]

I have one of these that has the exactly same connections, same board etc - but is Star Wars branded and I think it came from a local toy shop. My nephew gave it to me because "it was broken" - I put new batteries inside it and it works just fine.

[@pilkjaer]

That was a really cool video! I didn't know you could do all that fun stuff with it. Too bad one can't make a phone holder that would go bananas when the call arrives. I recall there were some stickers that could do the blinking but I would guess they used some different technology and they were really tighny. They also required Nokia 3310 style of the phone and stopped working when more modern phones arrived that were not emitting as much healthy goodness.

[@ZoonCrypticon]

@3:00 perhaps you could do a light spectroscopy to find out which gases inside get excited ?

[@Revnoplex]

i have something very similar to that one. burnt my fingers a few times, blew up a power supply (that wasn't even connected to the plasma ball) that mysteriously came back to life a few minutes later and lit a few fluorescent lamps and CFLs. I have noticed it messes with electronic devices such as a calculator and causes interference with tvs and radios

[@MichaelOfRohan]

Ladies and gents, a masterclass for taking ish apart!

[@etchoppau]

would you consider getting one of the USB killer sticks to do a tear down on its just the sort of thing you mess with

[@justpassnthru]

It makes me smile when he says: "Let's take it to bits" :-D

[@rogertycholiz2218]

justpassnthru - Clive: Just got back from pound land with something interesting - "Let's take it bits".

[@jakp8777]

Clive you should checkout the mini USB neon lamps. Some are real neon.

[@paulwedlock9788]

The second most fantastic thing about Plasma Globe's is the static electric effect of grounding dust particles from the air :-) Supper simple way of cleaning the house hold air you breathe.

[@waldsteiger]

very good. will it stop working at lower hz or will it just not look as continous?

[@BlancoDevil]

These also work as Transcranial Stimulators. Connect two wires to the glass and the other ends to your temples...Cheap way to get the right DC voltage.

[@edss]

I've bought an exact one from Tesco like 6 years ago, never seen it since I wonder why...

[@Purple431]

I wonder why...

[@gazyounglive]

Used to have a big mains powered plasma ball years ago in the late 80's into the 90's, just died in 1997 though might have went earlier if it was powered up more than once in a while. Hardly ever see them in the shops these days... though wax lava lamps made a comeback so there may be hope for the humble plasma balls.

[@t0m_mcc]

Clive, you should be on BBC radio :)

[@marcse7en]

Taking it to pieces? 😂😂😂

[@johnwalker194]

@@marcse7en and now it's time for the news ! One moment please.........

[@marcse7en]

@@johnwalker194 I don't understand your comment? What do you mean? ... And as I made it one year ago, I don't understand my comment either! ... Perhaps I meant that Big Clive would take the radio station to pieces, and reverse engineer it!

[@picobyte]

I have one and use it to test my equipment for EMC.If stuff fails with this it was crap anyway.

[@shanegoddard6142]

Would this be a danger to someone with a pacemaker/defibrulator?

[@bigclivedotcom]

It could be.

[@aaronbrandenburg2441]

Good question know anyone that works in the cardiac area of a place

[@justinforder2835]

Mine has this warning in the instructions: "DO NOT TOUCH THE LAMP IF YOU HAVE A PACEMAKER OR SIMILAR MEDICAL DEVICE".

[@DJ-SPARKY-REACH-ON-AIR]

fab video have you ever taken off High Voltage lead of a back of a TV and did that

[@CrazyNerdInventor]

I have a plasma globe that can react to your voice. I opened it up and I found a few resistors, capacitors and one Tip 122 transistor. The transformer has no feedback coil. It also has a cd4069 hex inverter. Connected to the base of the transistor. I don't really know why they would use a hex inverter instead of a timer ic but I wondered if you know why it is there.

[@bigclivedotcom]

The 4096 is often used as an oscillator with the advantage of extra gates for other purposes.

[@DataToTheZero]

Would running one of these have that same effect as ionizer? Especially if one references it to mains ground? or a big metal piece? Looks a lot more fun then your traditional ionizer.

[@futurealarms121]

I have an old Rabbit Systems (ever heard of them?) plasma globe from 1987. Thing has a grounded plug and is rated for 117 volts at 30 watts. It has a microphone and will turn on and off with sound so it can flash with music. Pretty cool thing. It has a logo that says "Eye of The Storm" on the front of it. It has the old style glass antenna inside with a sphere at the top. I think may actually use a flyback transformer like you mentioned in the video. May have to open it up one day and peek inside.

[@vk3hau]

HF and fluorescent lights , reminds me of the times I would test ( played ) with fluorescent lights at the ends of my HF long wire antenna, transmitting on 3.5 MHz at 100watts, you could stand Meters away on the ground holding one end pointing the other end up in the air towards the ends of the long wire antenna and get the fluorescent light to light up very bright with CW, and if you modulate the Carrier the fluro would flash with the modulation, oh what fun, maybe I should do a video!

[@frankbuss]

Nice. What's the frequency and voltage output?

[@fortunateson6070]

I've found with these plasma balls you can pull a spark through the glass by putting a piece of metal near them

[@ewozniak5228]

Casey Urquhart fold up a piece of 6x18 aluminum foil to 6x6 and mold around bulb and then turn on ckt. Touch it if you dare...😉

[@N4THANF0ST3R]

Hi Clive what would happen if you put the plasma through a large coil of copper wire would it create enough electro magnetic field to effect small electronics such as a calculator or digital watch?

[@MattOGormanSmith]

If you can add a way to adjust the frequency and voltage (pots with long nylon shafts), you can add some nice variety to the effects.

[@GadgetBoy]

I did a video on this too. Yours is far superior.

[@SotosAblaze]

Noble gas "toys" are quite rare nowdays, I've been looking for a pre-made pure xenon plasma globe but with no success. I barely even found suppliers for xenon gas to make one myself.

[@kjrchannel1480]

I have been burned by the secondary connection of a DC transformer for the larger ones. It may run on 12vdc, but at a very high voltage potential. I also had a12vdc ion generator module powered from a 6 volt battery with pins stuck in foil on both polarities in series with it and even they had coronas on them. The whole thing is an ion generator.

[@jjdynomite5757]

I've seen some that run on 4 AA batteries... They ran at 15kHz with the flyback xformer

[@matambale]

You can even get an appreciable zap just by touching the screws on the base.

[@Mrcaffinebean]

I have this exact little globe. It makes a pretty nice desk trinket. It has over the past several months lost some of its vibrancy.

[@thomasesr]

if its RF frequency levels, could it be used as a antenna emitter for AM radio to play music?

[@AverageJoe2020]

Might be interesting to feed an audio signal into the primary of the transformer to see the effect?, J.

[@Electroblud]

eeeh. It is RF all right, but an extremely dirty waveform. I don't think it would be able to transmit music. However, it might give of a nice loud white-ish noise if you put a radio near it.

[@thomasesr]

Or make a new one from scratch that can deliver a cleaner waveform and see if the music forms some sort of pattern...

[@Electroblud]

Thomas Richter That is something worth trying.

[@paulsengupta971]

I suspect it would be a little like a spark gap transmitter. Which you can just about modulate with music/speech but it wouldn't be very recognisable...

[@ralph72462]

By the way awesome job on your video exultant demonstration and information was detailed very well. It was very helpful to me. Thank you for sharing

[@SagePatrynXX]

Reminds me of the Tesla coil I built from the same place .. Not sure if it'd turn on Neon but does with cfl's even dead ones

[@SigEpBlue]

Heh, I ♥ those circuits where, once powered, the thought enters your mind, "oh SHIT, how do I turn it off without electrocuting myself?!" :D