Use These Settings to MAXIMIZE FPS in Marvel Rivals (Guide)

[@andrewdogza5303]

Ultra lumen to HIGH lumen = 30 fps increase High lumen to SSGI High = 20-30 fps increase again SSGI High to Low = 4-5 fps increase Post processing Ultra to low = 1-2 fps difference (leave Ultra) Foliage Ultra to low = 1-3 fps difference Native res to Ultra quality = 20-30fps increase on top Ultra to Quality = 10fps increase ontop Quality to Balanced = 10-15fps increase ontop Balance to Performance = 10-15fps increase ontop Performance to ultra performance = 20+increase ontop Effects and Shadows are bugged. I can play Conquest on 170fps with low shadows. 140-150 medium 100 on Ultra shadows. Take shadows down to medium or Low and it will be more stable, Effects Low for more visibility and 30+fps increase in battle!

[@Parv_3427]

hey @andrewdogza5303 what are you pc/laptop specifications ?

[@MrDragonorp]

I get different results on 4k dlss balanced, the difference is quite minimal tbh.

[@andrewdogza5303]

@@Parv_3427 3060 ti // ryzen 5 7600 // 32gb ddr5 // 180hz 1080p

[@xVibeChecked]

literally the first thing when i logged on with my friend was say, ima just give it like 24 hours til some dude on youtube tells me how to optimize my frames lol. preciate ya

[@Duckeeh]

np haha, hope it helps!

[@Umbreon5]

helpful video thanks! game was running like a slide show when i first booted it up lol. also anyone having performance issues i recommend updating your drivers it helped a lot for me

[@andrewdogza5303]

If i lower Lumen from Ultra to High lumen I get 30fps increase. If i lower lumen High to SSGI high i get another 20-30 fps increase. If i lower Ultra shadows to medium/lowi get 50-80fps increase in conquest TDM map. I found whats killing my fps, ULTRA shadows. Play a game with them on, then watch the difference on low.

[@bradlewis690]

I just drop frames all game long and it’s unbearable. 5600X and 3070

[@JOSHHUNTER-mn1jx]

Same here

[@mrdinosaurproductions9507]

Turn down texture quality, 3070 probs doesn’t have enough vram

[@bradlewis690]

@ it has MORE than enough homeboy.

[@mrdinosaurproductions9507]

@@bradlewis690 I’m just spitballing. Also, you’re really overestimating it. 8gb isn’t that much lol. No need to get aggressive, I’m tryna help you out

[@mrdinosaurproductions9507]

@ Have you tested this with afterburner? Marvel rivals is kinda known for its vram consumption, especially at ultra textures

[@thatbigbear6438]

Just one thing tho for those that don't know, if you see screen tearing, you have to either activate or deactivate V-Sync.

[@Samii-Sam]

we love u for this, ty💗

[@JonasPolsky]

Thanks! I picked up 40 frames after using these settings

[@katarsuss]

Great guide, fast and shit. Thank you for this brother!

[@Ant-bw5jo]

Another issue what i found it is that if you downloaded the latest nvidia drivers for some reason the game lags on it self horribly. I rolled it back and i was getting a constant 90-100 frames on my gtx 1070 in every match. Try rolling it back and see if it helps.

[@nuke1224]

to which update are you rolling back to?

[@animegx45]

I can't rollback the update at all. -.-

[@danielomanasa]

Frame generation gave me a big boost in fps i went from 140 to 300. I did have to put all settings low accept charecter quality and post processing. I have a intel core i5 11th gen and a 3070. Try it out it did help me a lot.

[@Duckeeh]

Glad to hear. I will pin this comment so others may benefit too

[@corythederp8459]

​@@DuckeehFrame gen(dlss3 or fsr3) can add latency to ur inputs depending on ur setup so test yourself and u can leave it on if you don't feel the latency

[@e2k220]

dont use frame generation. it adds latency so you will be at a competitive disadvantage.

[@fronczu]

the latency added is only really noticable when you are using frame generation starting from under 60fps to let's say 120-130fps. If your starting FPS is 140 then you are more than fine.

[@Crimsongz]

@@e2k220 It's not noticeable at high fps.

[@KnightsTempura]

HOW DO YOU TURN DOWN Character voices when they ult, everyone is fcking screaming

[@gyrox328]

Try the focus mode in audio settings

[@avocado-pj8mw]

I just had to lower my master volume and adjust everything else accordingly, they are so damn loud

[@japan100100]

Is this game supposed to compile shaders EVERYTIME you log into it? Or is supposed to be a one time process?

[@Duckeeh]

It happens every time. It actually hits my CPU so hard that I had to underclock it for my game to launch

[@tugaykaraman5111]

omg tysm i played on 2560x1440 and i had 60 fps now i play on 1920x1080 and i play on 180 on 200 tysmm

[@LeBabouin]

Hi ! i really want to play this game but i don't think my PC can take it, is it a heavy game ? with heavy graphics ? thanks :)

[@Duckeeh]

it is definitely quite graphically intensive

[@LeBabouin]

@@Duckeeh ok i see thank u !

[@user-si8pq6zn9b]

hey, which liftofdistance are you using on your viper?

[@nogunk147]

why i cant turn on low latency mode

[@Duckeeh]

it is probably because you don't have an Nvidia graphics card

[@caden2727]

If you have an AMD graphics card, you can download the AMD Adrenaline software and tweak performance and latency settings from there.

[@darkestnights9808]

@@caden2727 I have AMD software, I'm not very good with understanding the settings there, I normally just do in game settings most of the time, by any chance would you know which setting in AMD software should I change or turn on/off?

[@caden2727]

@ you have an AMD graphics card correct? If so, depending on your CPU and card, I recommend the auto overlocking feature for starters. It’ll take 10-20 minutes for it to read your specs and adjust accordingly. In the AMD software, there is some sort of tab for overall performance I just can’t remember where it is. In that tab there will be options like “balanced, power saving, performance.” etc. choose the performance mode.

[@JoobyG5]

Thank you

[@dineyelol]

So i have a Nvidia GTZ 1660 Super. Im running other games like fortnite, OW2, and cod very well. But when i get on marvel rivals and during certain fight i get huge drops and maybe consistent 85-95 fps. Any help?

[@Duckeeh]

In addition to this game, close or minimize background applications (like browsers) and consider downloading MSI afterburner for a GPU boost.

[@ChadWilly_gameZ]

ty!

[@randoom4048]

I am stuck at 60 fps, did everything and I continue to lag

[@gopalacharekar2950]

Same bro what is the cause of it idk if u solve it plzz tell me... I have a good gpu

[@mikez4388]

What's the best settings if you have a NVIDIA Quadro T1000?

[@domanicbirse1161]

reconsider having a nvidia quadro....

[@coltoon3431]

i have an nvidia graphics card but no dlss option :/

[@LEGVCY]

DLSS is only available on the RTX variant of the cards

[@coltoon3431]

@ oh thanks

[@carlosfrankie3804]

I have a amd ryzen 5 4600g with Radeon graphics 3.70 ghz and 12 gb of ram and you can tell how bad it is for this kinda game lol lowered everything and most I can get it 58/62 fps with avarage of 40 fps or some

[@japan100100]

I get similar fps as well even after turning everything to low. I could probably survive on the fps, but the part that really sucks is loading into the battle and being stuck at 99% for a long time. Another thing I noticed is that the game compiles it's shaders every time I log in. Thought that was just a one time thing?

[@gopalacharekar2950]

Im also stuck at 60 fps in gameplay

[@progunantilife4777]

my game is just capped at 60 fps for no reason and i cant find any fixes online. no vsync, no fps limit, nothing in my amd settings for those either. im losing my mind, the slight frame drops wouldnt be noticeable if i could uncap my frames. UGHGHGH

[@NotAzariel]

I have 10 fps

[@ml_t_iw8704]

fr

[@areyousatisfied1818]

crazy how i can play games like bg3 at like 100fps but this game drops me to like 30

[@KikuChalkz]

im running with a nvidia 1060 so i dont have dlss what do i use

[@lstsoul4376]

Fsr

[@ixconstantine7012]

I think borderless windows is much better to play in tbh

[@sanahri]

this litterally mad me lose frames lol

[@DiamondBatToons]

Not a single thing changed. I still have 10-20fps, MAX!

[@fabbae215]

welp upgrade your graphics card

[@darkestnights9808]

I use AMD GPU. Anyone know what settings I should put on the AMD software panel? Like outside the game, on the gpu settings?

[@mnkey3624]

I don’t have dlss :(

[@morsedesigns1588]

WHAT DO YOU USE WHEN YOU DONT HAVE NVIDIA DLSS

[@lstsoul4376]

Fsr

[@hanasweetie]

just put everything low besides the model quality. this game doesn't look better on any setting and i play it on a 1440p oled, it looks bad even on ultra, the low settings are worth the fps

[@Marvosmos]

dlss tanks youir input times

[@lstsoul4376]

Framegen*

[@BingusGarfunkle]

turn off your fan next time you record jesus christ above

[@Duckeeh]

i don't have a fan

[@asauru5827]

how i can have 144 Hz? Cause i have 144 Hz monitor, but in game i feel like i have 60 Hz

[@gopalacharekar2950]

Its games fault

[@asauru5827]

@@gopalacharekar2950 ye but i see ppl , streamers play on 144hz+ , so thats why im asking how i can turn it