Used abused BMW 550i 650i 750i N63 inspection common problems everything wrong with this BMW

[@ulisesserna6155]

Thanks for all your great videos. Looking to learn on how to work on my N63 and you have helped a lot.

[@makestuffmike]

What’s up man! Thanks for the content! Picking up a 2006 or so 550i very soon! Can’t wait to watch all your videos!

[@Kodiak727]

Amazing! an n63 that is 155k miles

[@SM610.]

Fixed myself rod bearings and valve seals and no more problems with the MF N63

[@cybersyber3602]

Mines at 146 and only little things start going bad so not too bad I changed the lines and got a new pump and still runs good

[@gianky7727]

@@cybersyber3602what main issues have you had since 90k and that you reccomend doing

[@aramos811]

Good advice on buying a mistreated BMW that will need lots if repairs.

[@cincomorales]

Thank you for making this type of videos Keep going ;)

[@rulebraking]

Missed opportunity to scan the car for codes to have a better understanding of the full health of the car!

[@quirino18]

Hello My Friend! Got a Question, i got the infamous N63 Engine and used to leak from Valve seals bit its Been repaired by BMW but i doubt they cleaned the Intake Valves, how Can i Clean it without removing the Intake Manifold? i noticed you sprayed Cleaner but didn't work for you what other way can they be clean if any? and where are you located? in case i need work done

[@MD-xs6fx]

Great video!

[@evanwilliams4231]

I have the same car and getting a repeat P00BD code. I’ve replaced air filters, maf sensor also swapped drive said maf sensor and it came back. New map sensor and new intake duct to the turbo and it still comes back. Any ideas?

[@symons666]

I like the T shirt !

[@JAK1981]

my mother just bought a 2010 BMW 750I , it only has 13,000 miles on it so it basically brand new and flawless at the moment. What im wanting to know is if the N63 recall is still available to my mothers vehicle should something go wrong ? I can work on the car myself and already planning on combatting the issue with the heat that causes the main problems of oil consumption with wrapping the turbos and down pipes, as well as replacing the air intakes and mocking up some ducting to keep cooler air circulating to the turbo and motor. BUT again would be great to know that the CCP hasnt yet expired for my mother.

[@pampered3126]

yo, doubt ull see this but id you do, hows the car been over the months? any unexpected/over the top expensive problems pop up, does it still drive the same as it did when purchased, how many miles have been put on it. Ty for your time rlly appreciate it!!! If you do see this n respond @ me please

[@JAK1981]

@@pampered3126 Hey bud, not completed yet because I had to wait for a restock for bolt on downpipes . I say another 3 weeks because I have to get everything powder coated and then have the time to put everything back together. I will keep you updated, keeping a journal on what im doing.

[@flocal8528]

Where is your shop located?

[@kevinkalil6837]

Hi there. Kevin greeting you from El Salvador. I got my valve seal job done and now my car is slipping between gears. When I press on the gas any more than 40% it slips and jumps to next gear. Oil and filter been replaced and all transmission and eco reset done. No luck. Have you had this issue? Can it be a bad solenoid or torque converter? Mind you the transmission was perfect prior to valve seal job. Any advise will help. It’s been 2 months

[@donaldbarron7916]

Awesome show !!

[@alterekporterfield8956]

Hello do u fix them cars I need my 750i fix 2011

[@victorpazos8396]

francisco .como te ubico?

[@tiffanythomas9841]

where you located?

[@shootunderpar4736]

I recently changed my spark plugs and coil packs when I bought my 550i with 98k miles . Car was running great until I brought it into bmw dealership to do the auxiliary water pump recall, came back running rough and constant misfire in cylinder 5

[@zlord1199]

Yeah they screwed up something. You should make them pay for that and fix whatever they screwed up.

[@SuuMyyDii]

Take it back to the dealership and have them pay for all damages!

[@e92life23]

Maybe injectors ?

[@hulk-smash-deez-hose.7951]

Lol 😂 the dealer disrespected you

[@nicolezamudio2382]

Francisco tengo un 750! 2011 Problema con sellos de las válvulas como me contactó contigo mas directo

[@nicolezamudio2382]

Necesito contactarme contigo y ver si lo puedes reparar el motor

[@juniorwilkinson8968]

Great job

[@carlosfrayre7657]

Hola tengo un bmw 2015 640i con 80000 y me salieron estas claves u1408 u1408 p0128 u1408

[@guillermomadrigal8382]

$3000 dollers, thinking while i just bought the same vehicle with 74xxx for 10k 😵😵😵

[@victorpena3889]

How can i prevent my engine from failing?

[@Chris-wz6hv]

Regular oil changes, inspection, and changing engine components at required miles.

[@victorpazos8396]

tu email .sale incorrecto quiero q cheques mi auto