Using a STM32 like an Arduino Tutorial | STM32F103C8 vs STM32F030F4 vs STM8S103F3 vs Arduino

Get good quality PBCs manufactured: www.pcbgogo.com/y
In the video first, we will be looking at the different types of micros from STM and comparing them to each other along with an Arduino UNO.
After that, we will be converting an STM32 board to an Arduino and upload code to it using the Arduino IDE.
Boards manager URL: dan.drown.org/stm32duino/packa...
STM Flasher Tool: www.st.com/en/development-too...
Bootloader binary: github.com/rogerclarkmelbourn...
Instructables: |Upldating Soon|
Wanna help us out? Consider donating any amount:
www.paypal.me/akarsh98
CETech@FB:
/ cetech4u
Track: Raiko - Revenger [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Raiko - Revenger [NCS ...
Free Download / Stream: ncs.io/Revenger
#STM32 #Arduino #STM32F103C8 #STM32F030F4 #STM8S103F3

[@englishrupe01]

Really excellent review, comparison and demo/instructions! Many thanks!

[@Good-Enuff-Garage]

awesome job, I love the simple pen and paper presentation, it's all about the data not the silly graphics for me

[@leifkretschmercotanum7128]

Good explanation. Thank you

[@dmitribovski1292]

Arduino At328p is 8bit at up to 20 Mhz, 10bit ADC Blue Pill stm32f103c 32-bit at up to 72 MHz, 12bit ADC

[@ikeraden8933]

Instablaster

[@PraveenMax]

Useful video!. Watched at 2X speed to save time :)

[@Cdswjp]

what a great video. very well done thank u for it

[@IAmOrion]

Thanks for this - I'd ordered 5 of the "Blue pills" from AliExpress the other day because they were stupidly cheap and thought "I've no idea what I'll use them for but I'll get some anyways".... Good to know I can use them with the Arduino IDE though! I flashed the bootloader (Although I used the USB ST Link that came with the bundle) and it works great with the IDE. Thanks for the helpful video

[@kosa2004]

I am having second thoughts to buy a few STM32 blue pill boards. Very good video!!!! 😀

[@CETech4u]

Hahaha. Buy one of each model for diversity! Also do subscribe to our channel for more!

[@sankeerthc2911]

Bro after doing the process you explained in the video I can't find the maple mini comport in my Arduino IDE.under the device manager I can see an exclamation mark under USB devices. i tried installing the drivers but still, it does show the comport. Please help me out!!!!

[@brijeshkhokhar]

Helpful video ... !!!

[@cgnclk]

I have a STM32F103C8T6 and I connected my board to FTDI232 like you said, flashed the same file successfully, my board gets recognized as Mapple Mini on COM11 and variant settings in Arduino IDE are just like shown in the video but when I try to upload any code to it I get this error: maple_loader v0.1 Resetting to bootloader via DTR pulse Reset via USB Serial Failed! Did you select the right serial port? Searching for DFU device [1EAF:0003]... Assuming the board is in perpetual bootloader mode and continuing to attempt dfu programming... dfu-util - (C) 2007-2008 by OpenMoko Inc. Couldn't find the DFU device: [1EAF:0003] This program is Free Software and has ABSOLUTELY NO WARRANTY timeout waiting for COM11 serial Also not sure if it is relevant but connecting the board to my Windows 10 computer makes a device connect and disconnect sound. Please help me troubleshoot.

[@glowpong52]

does the Bootloader with STM32LXXXX boards? i developed a project using an arduino and now i need to load the code on to my new PCB that has a STM32L microcontroller.

[@batticha462]

Thanks. At 14:05 you show the STM32 connected to USB cable, but at this stage it is connectted by wires to the FTDI not to the computer by USB calel ?

[@fegadevaibhav5044]

When I upload the program for bootloader in stm32 that is a successfully done and upload LED blinking program in stm32 that's work but the removing usb to ttl converter that LED blinking are not working without usb to ttl converter

[@TheDefpom]

Interesting video thanks

[@CETech4u]

Thanks Defpom!

[@Shubham-po2tp]

Please share any playlist link for coading smt 32 as Arduino nano few codes (lcd interfacing, servo code, different sensors code) on smt 32 like Arduino

[@H2ON_MEA]

Can we use the modulus of arduino 5v with STM32 board ? I think that Arduino code will run on STM32 with the same speed. Is that right??? Thank you .

[@mesquitamk1681]

what is the difference between the STM32F103C6 T6 and STM32F103C8T6... 6T6 and 8T6

[@Cdswjp]

what is a flash loader & boot loader mean?

[@mesquitamk1681]

this board is 8-bit or 32-bit

[@aleksandarrankovic2035]

Good video nicely explained. Can you make a video Blue Pill STM32F103C8 and SD card. It would be good to process it since there is no tutorial, a lot of people switch from Uno 328p to Blue Pill

[@CETech4u]

Thanks for the suggestion, will keep that in mind

[@abhaygarg4736]

Is it possible to use the Arduino Libraries with the STM32? Or we have to use STM32 specific libraries? Thanks.

[@CETech4u]

As far as I know some arduino libraries can be used

[@abhaygarg4736]

@@CETech4u I am working on the MAX30102 pulse oximeter sensor with STM32 can we use any Arduino library with STM32? Please help if you can. Thanks

[@andrewtoogood1429]

Great when it's the follow up video?

[@CETech4u]

Hey, What topics do you want covered in the follow-up video?

[@TheKetsa]

The advantage with arduino is access to the myriad of libraries, drivers, examples, tutorials, videos...

[@CETech4u]

That is true!

[@mesquitamk1681]

of these cards which is 32bits

[@ElectroMart90]

ATMEGA328P is not a 32bit microcontroller. Its an 8-bit Microcontroller

[@johnaweiss]

i think you're method does TWO things: - makes the board programmable via USB - makes the board run Arduino code, with loop{} and setup{}. But what if i don't want loop{} and setup{}? What if i want to program via USB, but i want to use C-style main{}? Is that possible? How? thx

[@CETech4u]

Define a while loop inside the main()

[@johnaweiss]

@@CETech4u What happens if I don't define a while loop in main?

[@ZElTGElST]

Cool guide. Subscribed. The arduino nano is not 32Bits but 8bits, tho!

[@CETech4u]

Yeah did that mistake, I had added a card on the top left for that

[@brijeshkhokhar]

which software are you using to create this kind of video ?

[@CETech4u]

Software for editing or screen recording?

[@brijeshkhokhar]

@@CETech4u yes...

[@CETech4u]

Premier Pro and OBS Studio

[@jimmatheson9125]

isnt atmega 328 8 bit?

[@CETech4u]

Yes it is. My bad in writing that incorrectly. Although I did add a card for that, didn't that pop up?

[@iwayanartayasa38]

Stm 32 posible to use liblary of arduino???

[@CETech4u]

Yes

[@CETech4u]

Yes

[@TheLightningStalker]

14:05 this may have been why I could never get USB to work on these boards.

[@tt3233]

The Arduino nano is 8 bit not 32 bit

[@jb0433628]

"Couldn't find the DFU device"

[@jb0433628]

Workaround : boot0= 1, use serial to program instead, then put boot0 = 0

[@symonsaz8496]

Arduino AT328p is 8 bit, not 32 !!! RTFM

[@a-job7276]

STM32 VS ARDUINO NANO: kzbin.info/www/bejne/e2nLaYyajLqVba8 5 time faster on Counts. Check the test of analogRead(), it is too fast on STM32F1. kzbin.info/www/bejne/bnXZhqyar9p7i80 116uS vs 4uS on ADC Test (ADC 10Bit VS 12Bit) 😭

[@victorJRF]

No explicaste nada.. no se ve lo que haces