Using Patterns in Autodesk Inventor (2D and 3D)

  Рет қаралды 44,199

Autodesk Inventor Guy

Autodesk Inventor Guy

Күн бұрын

Пікірлер: 22
@zichtloos6233
@zichtloos6233 5 жыл бұрын
Even in 2019 u helped me with a pattern for a gas grenade design, very helpfull video, thanks a lot!
@oogabooga5653
@oogabooga5653 4 жыл бұрын
hol up
@brucewayne3427
@brucewayne3427 7 жыл бұрын
I designed a Death Star lamp head, and would've had to do all the extrusions individually, but this saved my sanity. Thank you!
@hassanidrissi4820
@hassanidrissi4820 6 жыл бұрын
I designed a Noose with Multiple String Details, and would've had to do all the extrusions individually, but this allowed me to use the noose for a suicidal act. Thank you!
@hillfortherstudios2757
@hillfortherstudios2757 3 жыл бұрын
Can you suppress instances of a pattern in inventor?
@AutodeskInventorGuy
@AutodeskInventorGuy 3 жыл бұрын
Hi James, as you're creating the pattern there is a tick box on screen above each instance and you can turn them off/on at this point. Alternatively, if you've already created the pattern - head to the browser (defaults on the left), expand the Pattern and you'll see each instance and you can right click -> suppress. Hope that helps!
@hillfortherstudios2757
@hillfortherstudios2757 3 жыл бұрын
@@AutodeskInventorGuy Thanks bud! I will check it out!
@dndazzhraaa
@dndazzhraaa 3 жыл бұрын
thank u so much
@AutodeskInventorGuy
@AutodeskInventorGuy 3 жыл бұрын
you are welcome :)
@SeanAlcorn
@SeanAlcorn 4 жыл бұрын
Hi there, I have searched everywhere and watched dozens of videos. I am trying to cut a profile shape into the wall of a cylinder - say 4" copper tube. I have managed to create a 3D sketch of the profile I want to cut on the outer wall, but can not produce a 'cut' through the wall. We are still on Inventor 2016 - thank you in advance for any help.
@Konradulations
@Konradulations 6 жыл бұрын
do you have an idea how to add a complex logo to an object and expand it? but not with having to redraw it etc and not just a textbased logo, starting with vector file...
@IlIsashkaIlI2
@IlIsashkaIlI2 4 жыл бұрын
any advice on how to add spheres(about 25 of them) along the outside of an oval/egg 3d shape? kind of like pattern an object along an oval dog collar...
@AutodeskInventorGuy
@AutodeskInventorGuy 4 жыл бұрын
You can pattern along a path, which can be a sketch that has the oval/egg shape in it. It can likely be a normal 2D sketch if it's uniform in one plane. Otherwise do a 3D sketch. Then you can pattern the spheres along that as the 'path'. Works very similar to the sweep tool, but instead of 'profile' and 'path' you have 'feature' and 'path'. Hope that makes sense!
@zachdaniels8112
@zachdaniels8112 2 жыл бұрын
Are these cut-out shapes normal to the surface or do they cut out perpendicular to the work plane?
@AutodeskInventorGuy
@AutodeskInventorGuy 2 жыл бұрын
Hey Zach, great question, it depends on how you created them. If you use Extrude then it'll perpendicular to the work plane. If you use Emboss then you are able to do it normal to the surface. 👍
@zachdaniels8112
@zachdaniels8112 2 жыл бұрын
@@AutodeskInventorGuy good deal. Thanks for clarifying!
@jaykay1332
@jaykay1332 5 жыл бұрын
I tried making a fish filter and every time I try using the extruder or hole function even with cut, it keeps 3d printing as if they are tubes. Help if ya can
@prismclothing
@prismclothing 5 жыл бұрын
Hi Jay Kay, are you saying it's adding material, rather than removing? If so are you sure you're on 'cut' not 'intersect'?
@jaykay1332
@jaykay1332 5 жыл бұрын
@@prismclothing Thank you for the help that's what it was. Trial and error!
@colincarhart4832
@colincarhart4832 5 жыл бұрын
When I try to shell it, it wont work and just says it "Could not create new shell".
@AutodeskInventorGuy
@AutodeskInventorGuy 5 жыл бұрын
Have you already shelled it? Check the browser on the left. If it says 'new shell' it is likely because of this. Otherwise have you made sure your wall thickness is achievable with the size of model you have made?
@danielshad5685
@danielshad5685 5 жыл бұрын
Thanks
How to Grill (Plastic Parts) | Autodesk Inventor
15:53
Tech3D
Рет қаралды 70 М.
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 30 МЛН
Миллионер | 3 - серия
36:09
Million Show
Рет қаралды 2,3 МЛН
One day.. 🙌
00:33
Celine Dept
Рет қаралды 74 МЛН
Air Distributor | Cone | Loft Command | for beginner | inventor 3D
8:55
Design & 3D Print Triple-Start Threads using Fusion360
26:09
Shop Therapy
Рет қаралды 20 М.
10 Things You Didn't Know Inventor Could Do
10:45
3DAllDayEveryDay
Рет қаралды 180 М.
Autodesk Inventor Jewellery - Signet Ring
10:39
Longworth Inventor Tutorials
Рет қаралды 374
USING DRAFT FUNCTION with INVENTOR (UNISA CAD611S) Autodesk Tutorial.
6:20
HoW About CAD Drawing with Junior JJL Lumbu
Рет қаралды 3 М.
How to Sweep | Autodesk Inventor
9:34
Tech3D
Рет қаралды 109 М.
Autodesk Inventor 2022: Barrido
6:33
Paco Muñoz
Рет қаралды 10 М.
Autodesk Inventor 2020: 6: 2D Patterns
10:20
Education Public
Рет қаралды 11 М.