Using Sure Cuts a Lot 5 with Cricut Legacy Machines and Libcutter

In this video, you will learn how to set up your older Cricut Legacy Machines including the Cricut Personal, Cricut Expression, Cricut Cake and Cricut Create with Sure Cuts a Lot 5 and a third party plugin called Libcutter. It used to be that only Sure Cuts a Lot 2 worked with these machines. That is no longer the case. Follow these simple steps and you will be able to use SCAL5 with all of its new features. Enjoy!
***PURCHASE THE FULL VERSION OF THE TRIAL DIRECTLY THROUGH THIS LINK**
www.craftedge....
I do receive a small commission if you purchase through my link, thanks for supporting my channel!
Firmware Needed:
Cricut Personal Firmware v1.34
Cricut Expression (Original) v2.34 or v2.43
Cricut Create - Firmware v1.54
Cricut Cake - Firmware v1.54 or v2.3
Cricut Design Studio Software Download (Firmware Update):
** UPDATED LINK FOR CRICUT DESIGN STUDIO**
drive.google.c...
Sure Cuts a Lot 5 TRIAL Download ( Windows & Mac):
craftedge.com
Libcutter Plugin Software Download (Both Windows & Mac):
Windows:
ufile.io/mihin...
Mac:
ufile.io/wd46p...

[@sweetcraftylicious]

You can purchase Sure Cuts a Lot 5 using the link under the description box. Happy Crafting!

[@andreafaretra5552]

If I go over the 1.34 firmware will I still be able to cute with SCAL on my personal cutter?

[@KhaosNMT]

Just did this with a thrift find Expression and SCAL 6. I used the Cricut download link and libcutter installer link provided. Works like a charm! Now I just have to see about getting blades and mats! 😂

[@abihamajid5126]

Please tell me if it works and how the final product was

[@KhaosNMT]

@@abihamajid5126 it works well for me. I installed the Cricut Design software from the link provided in the description, then the SCAL 6 trial. Unchecked the box at the end of the SCAL 6 install, then did the firmware update in Cricut Design Studio as shown in the video. Closed Cricut Design and installed the plugin from the link provided. Finally, open SCAL 6 and configure the cutter as shown in the video. It took a bit of adjusting font sizes and getting used to SCAL, but everything works and looks good! I honestly can’t tell a quality difference between the SCAL output and what I can get with the cartridge I found.

[@carlat1170]

Thank you SO much! I scored a mint condition Expression for 10 bucks at a garage sale and now I can actually do fun designs as a beginner, before fully investing.

[@jbeam513]

He he he.. me too!! 😀

[@luciawoodson4198]

You saved me SSSSSSOOOOO much money. I thought my Cricut Expression was obsolete for the cute SVG files that I see online. I kept on thinking that I was going to have to buy a new machine until I decided to search if there was a way to use SVG files on the Expression. That inquiry led me to your video. It was very well explained and easy to follow. Thank you.

[@sargfowler9603]

I've just followed this guide and got my Cricut Personal working with SCAL 5. So pleased I found this video. Thank you. Just purchased SCAL 5 as its a cracking bit of software that's saved me hundreds of pounds buying a new cutter when my old one does everything I need.

[@vesuviocinematics472]

I am trying to run this on my cricut personal cutter but somehow it does not cut correct. If i try to cut any fonts from scal 5 it cuts only here and there and leaves me with a headache. Does yours cut perfectly using scal5? When i use the cartridge fonts it cuts perfect only Scal 5 that gives problem

[@rev.juliesavoy5817]

THANK YOU. You made it so very simple and clear on how to do all of that. You rock. My little find (Personal cutter) can now work with SCAL6. PERFECTLY! Thank you oh so much.

[@tanyadouglas1632]

Do you mean sure cuts a lot 6? When I click the link I get version 6. I am wondering if this version 6 is compatible with the personal cutter?

[@ladybea67]

PERFECT Instructions.....I had my expressions sitting on a shelf because of the discontinued software. Thank you so much for this video. Now i can enjoy crafting more!!!

[@pattyperkins2695]

Just got a couple of legacy machines through the Goodwill. Your video got me set up with one machine; now I just need to do the other. Thanks so much for sharing your information!! Very exciting to have this window opened up!

[@itzkimzstuff]

Hi. I have the Expression. Is this something I can use as well? Thanks

[@vanessamarrero3902]

Thanks.... I have a Cricut Expression 1 since 2008, brand new, never use it. I just want to start sewing baby shower gifts and did some reasearh and found out that this machine will be very useful. Also wanted to be part of this new business options. Got sad, knowing that this model was not compatible to Cricut Space. I found your video. I followed all the steps and ....... Iit works. I uploaded the Sure Cuts a Lot 6 trial version and its works. Thanks again. God Bless you. Blessings

[@shteevale395]

I came to find out if Sir Cuts A Lot still works with the expression and personal cutting machine, so thank you!

[@jdmcburney]

Thank you so much for this. Just putting a Cricut Expression 1 into use. Just FYI, the work around works for Sure Cuts A Lot 6 as well!

[@amberboyd1031]

I can't even tell you how thankful I am for this video. Downloading Libcutter was the very last issue I needed fixed after 3 days of internet/computer deep diving hell 🥵 I can finally start crafting, thank you again!

[@knmonlinemedia]

I picked up a Cricut Create from Goodwill for $15. No carts, books, or anything! Just the plugs. The firmware is 1.54. Looked for any information online about it and found your video. Tried SCAL 6, libcutter, and did a demo cut and it worked! I'll purchase soon thru ur link!! TYSM!!

[@sweetcraftylicious]

I’m glad it helped.

[@LYSSAMARIE33]

I was gifted a Cricut expression and followed every step, and it worked!! Thank you so much!

[@lisasmith9368]

Thank you!! I've been searching everywhere. I couldn't find anything but version 6 to download for the trial but the libcutter worked with it also! Just did a test run.

[@rblessons]

All works as described using Cricut Expression 1 found at Goodwill, updating firmware, and using SCAL 6 with Cricut Plug-in. Awesome! Thanks

[@WBurns34]

Awesome video, worked for me, I just got my first cricut personal, had no clue how to work it or connect or update, all good now with this video. Thanks

[@alexgutierrez5123]

Like the comment below, THANK YOU, THANK YOU, THANK YOU!! I have been trying to update my expressions machine for a very long time, almost giving up. Then I found you with this very very helpful tutorial that saved my machine from the goodwill pile. Thank you so much. Great explicit directions, step by step. Works just fine now. WOW!

[@sweetcraftylicious]

Your very welcome!

[@ablack1991]

This was EXTREMELY helpful! I’ve been trying to figure this out for SOOO long! Thank you so much for this stress reliever!!!❤

[@allenfarm]

Can I send you a letter of appreciation? You just saved me some tears from thinking I spent $50 on software what doesn't even work

[@sweetcraftylicious]

I’m glad this helped!

[@vondellacrawford1405]

Videos I did my first project it was upside down

[@trecieracrawford7060]

THANK YOU SO MUCH!!!!! I had to pull my E2 out since my Cameo is trippin'! You saved me from throwing everything at the wall!

[@ladybea67]

As I said before, this video shows how those with legacy cricut machines can use SCA however you do need to purchase the license as it will cut lines across your designs in the trial mode. I am extremely happy with it....

[@stevensmith8285]

Omg! Thank you! I scored one for $60 with all kinds of goodies. So glad I’m able to use it with my laptop💜

[@sarajean6093]

Same here! Cutter with all goodies for $60. So glad I found this video!

[@electricalscarecrow]

$30 at Savers here

[@juanitamacdonnell4798]

It worked!!! Your instructions were very easy to follow. Ty!

[@tunekathomas1087]

Glad I found your video!!! I was recently gifted my first Cricut. I have LOTS of questions. It's the Expression. I know it an older machine. 1. Once I successfully follow the steps in this video, do I absolutely have to purchase cartridges or can I create designs and/or download all the images I need/want via my laptop??? 2. If I have to purchase cartridges, where is the best place to do so? 3. Suggestions on best cartridges or sights for downloads. (Right now I am mainly interested in printing t-shirts and creating decals for mugs). Suggestions from anyone would be appreciated and helpful 🙂.

[@sweetcraftylicious]

I’m glad you found this helpful! If you want to be able to cut any image from the internet, you will need to purchase the full version on Sure cuts a lot 5. You only need 1 cricut cartridge ( it needs to be inserted at all times when using the Scal5 software. It does not matter which cartridge it is. I recommend Facebook market or eBay for purchasing cartridges.

[@fergiellis]

Thank you so much! Your instructions are so clear and helped me to set up my Expression. I can't wait to try and make great new items for myself and friends.

[@rileydunn8076]

Thank you again for all this great information! I got a free expression and after a ton of attempts I decided that it had an unfixable software issue as it would always shut off during prints, I now have bought a new expression used, and it works perfectly! Thank you again

[@sweetcraftylicious]

I’m glad it was helpful!

[@evelynromero5897]

Thank you so much

[@jonzimmerman1754]

I just picked up a Cricut CRV001 with firmware V 1.45. Follow your instructions (good job by the way) and it works perfect. Thank you.

[@sweetcraftylicious]

I’m glad it worked for you. Enjoy your new cricut!

[@liseoe]

muchas gracias por tu bideo, tengo una cricut y gual a esa , y nunca la avia podido utilizar asta hora que vi tu video,

[@sweetcraftylicious]

Me da gusto que te sirvió.

[@nidiajuarez8133]

Hola, que dicha que vi comentarios en español jj Donde consigo imágenes svg para mi cricut expression? Tengo la versión 2.34 .

[@bettymarshall1462]

Thank you is not even good words to give you. You have saved me so much heartache since you showed me how to update my Cricut Expression. I have been only using the cartridges I have bought for the past 5 years. This was amazing and I feel like I am a kid in a candy store. Thank you, thank you, thank you.

[@bomchicawahwah2727]

Did it with the updated link and worked like a charm...THANK YOU!!

[@patriciajones2823]

Thank you so much. Your video help me on my Cricut expression in 2021 😃😃😃

[@eduarhn3253]

Me too.

[@sharonmckay9935]

THANK YOU SO MUCH for this video. Your explanation was very clear and it was a pleasure listening and learning. This was a life-saver for sure.

[@celiadarden5131]

Fantastic and extremely helpful. Love the step by step. Thank you.

[@sweetcraftylicious]

THE LIBBCUTTER DOWNLOAD LINKS HAVE BEEN UPDATED. * QUICK TIP* If your having issues with the usb not being found, update your usb driver and try again. Many have tried this and it has worked for them.

[@AnaS-kk6qc]

Hey there, The Cricut Design Studio Software Download link doesn't work, is there anyone you can provide it to me?

[@sweetcraftylicious]

The link has been updated. Let me know if it worked for you.

[@bomchicawahwah2727]

@@sweetcraftylicious I'm trying right now and the updated link isn't working...any new ideas to download it?

[@bomchicawahwah2727]

@@sweetcraftylicious NVM...got it..thanks!

[@margaretdurfey1210]

I can't see the link to the download. Can you help me?

[@farrukhnaureen]

I am so happy that i found your video. It have helped me so much. Thank you thank you thank you

[@debrahunt5876]

This is a great video. I would suggest you add an update to your post, telling people how to update the usb driver and where they will need to do that. I struggled for hours with my circuit expressions and didn’t remember how to do this. I think it would save others a lot of grief. Thanks again.

[@sweetcraftylicious]

Thanks for the suggestion.

[@terrywall6295]

Debra or someone please let me know secret for downloading usb driver for expression

[@FutureLaugh]

this is great info, youve done a tremendous service

[@patriciasirmans2332]

This worked great for me. Thank you so much for sharing.

[@jessicagravley7399]

Thank you so much for this tutorial, I had been using Scal 2 for years and it stopped cutting so I thought there was no hope. I looked everywhere and finally found your tutorial, the first one of many that actually worked, cannot thank you enough!

[@sweetcraftylicious]

I’m glad it worked.

[@yorkielover714]

Hi thanks for this video. The step by step is very helpful. I got the sure cuts a lot 5 downloaded and the libcutter as well. I see that the scal will only work in demo mode for 15 days. I also see online a SCAL version 2. I have the first cricut and wanted to know if that will work with this cricutso I can use it past the 15 days. I just bought this machine to see if I was interested enough to buy a newer model. I hope I can play with it a bit because I don't want to buy cartridges for it. thanks for any help

[@lajuanabarnett5265]

Thank you. Easy to follow instructions.

[@BeverlyClaussen]

This was wonderful - you did a great job and helped me tremendously! Easy to understand and follow :) Thank you

[@hildeaux]

Has anyone found a solution for expression 2? Thanks for the great video otherwise.

[@TheAminat2010]

Waiting for this as well.

[@kennedyn6976]

Thank you so so much!! You saved me so many tears.

[@sweetcraftylicious]

You’re welcome!

[@JuanGarcia-co1vs]

This was perfect and exactly what I needed. Thank you so much.

[@kdawson020279]

Priceless info! Thank you so much for the tutorial!

[@kdawson020279]

I have a personal in awesome shape that I got for a song because Provo (please don’t sue me! 😁) bricked them knowing there was a way. I’m looking to do stencils and transfers for skateboard graphics and clothing so I can have unique art on a $20 board. I’m going to start working on it tomorrow. 👍

[@mayelaluis6862]

Thank you! Your video helped me to get my expression cricut to work. But after I bought the sure cuts a lot I’ve not been able to use it. The computer don’t found the the cricut

[@sweetcraftylicious]

Uninstall the program and reinstall it. Enter your serial # and it should work.

[@mayelaluis6862]

@@sweetcraftylicious Thank you very much! I will try it right away

[@latashamoore4766]

Thank you so much!!! it helped me so much..

[@elsieroach924]

Worked great thank you for awesome instructions. Hugs

[@jeannaroam4126]

the plugin stuff is stuck behind pay wall any reuploads ?

[@silvanaa3128]

I got my Cricut Expression 2 as a Christmas gift from bubbie a few years ago. Did not had much time to use it at the time but had been investing on cartridges, tools, pens, etc. Now that I am retired and would love to use the machine, the software can not be updated. I am devastated! I thougt I could at least use the cartridges! I called Design Space rep and was told that they can't do anything but would give me a discount on a new one. Mine is new, still have the box and only used 5 or 6 times! I don't trust Provo Craft anymore. I've been frantic reading every post or comments just in case somebody finds a miracle. Sorry for my venting...I am very upset .

[@sweetcraftylicious]

Unfortunately as far as I know, there is no way to make the expression 2 work with this software. Sorry.

[@silvanaa3128]

@@sweetcraftylicious Thank you for your time anyway. If you or anybody happens to find something about the Expression 2, plese let me know 😥😔

[@ariesr4883]

I luv you!!! Thanks a lot for “... cuts a lot”l Btw any info on explorer using SCAL?

[@3tyx1am]

hi great vid one problem is the link for libcutter as gone is there a chance of another link thank you

[@sweetcraftylicious]

SORRY FOR THE DELAYED RESPONSE. LINKS HAVE BEEN UPDATED!

[@Theelsy96]

Thank you for this wonderful video... I have Cricut cake machine and to update firware Step 3 says to choose the correct cricut machine.Can you tell me which machine should I select because cricut cake isnt even an option.Thanks

[@sweetcraftylicious]

“Cricut expression” should work fine.

[@leanneusher1001]

This was great thanks! Everything worked as it should. Question in 2024, the only purchase option is SCAL6 - will that continue to work on legacy machines?

[@sweetcraftylicious]

Yes it should work with the latest version SCAL6.

[@leanneusher1001]

FYI - it does :) Thanks so much! @@sweetcraftylicious

[@IAdoreIdolFlorida]

This is really helpful but my designs are cutting off center. Every time I cut with SCAL it seems to start the cut in a random place. How do I make it start the cut in the same place every time for the same design?

[@luvnrich40]

Why is it I can't access the free download to libcutter based on the links on the Sure Cuts A Lot forum you provided? Does anyone know?

[@sweetcraftylicious]

I just double checked the links and everything should work.

[@porshaboard]

Dusting off my cricut cake to use as a regular cricut. Which machine should I chose since it wasn't an option in the update options.

[@sweetcraftylicious]

Cricut expression

[@lonniesmith6591]

This is awesome! So if i buy the scal do i just buy the update since i already have the program? Or do i have to buy the whole version??

[@sweetcraftylicious]

When you purchase it, I will have you download it from craft edge’s site and automatically replace the trial version. I do have a link to purchase the software in the the description box.

[@Shereal22]

THANK YOU!!!!!

[@erickagreen5838]

I can't get the design studio to open! I have tried everything! This video finally gave me hope for my Expression machine. The message reads "the application could not be installed because the installer file is damaged. try obtaining a new installer file from application author" Any ideas? I have tired uninstalling and everything.

[@sweetcraftylicious]

I believe Cricut recently removed the download. It is sad because so many people have the older cricut machines. I will try to see if there’s a different way to get the download.

[@sweetcraftylicious]

I have updated the cricut design studio link. Let me know if it works.

[@PartyGarden2024]

Which one do I pick for the Cricut Cake? It’s not listed 🙏🏼 thank you!

[@sweetcraftylicious]

I used the option “ Cricut Expression “

[@PartyGarden2024]

@@sweetcraftylicious 😊 Thank you!

[@crystalhuerta45]

Hello, I love this tutorial! Can you help me with a problem I'm having?☹ I followed everything you did but for some reason my cricut is cutting 2 straight lines in the middle of every cut I do, how do I remove that??

[@sweetcraftylicious]

The 2 lines are because the download is a trial. When you purchase the software the lines will no longer appear.

[@darlenegomez416]

HELP ME! I followed through this video doing as it went along. the libcutter file is no longer available for free. Is there any way around paying? I'm having so much trouble connecting my old cricut expression.

[@dawnrodriguez6104]

I'm having the same issue, followed the instructions to a T and then ran into this bump in the road, ugh! 😫

[@sweetcraftylicious]

SORRY FOR THE DELAYED RESPONSE. LINKS HAVE BEEN UPDATED!

[@jonathanmartin6608]

Thank you for the tutorial. It worked like a charm, but I'm having an issue with my blade cutting along the movement line on some of my more complex designs. I tried cutting a butterfly box, but about 2/3 of the way through it, my blade seemingly failed to retract and cut diagonally across about a third of my design. Frantic Google searches would appear to indicate that it's a memory issue and a result of sending lots of data over USB. Do you have a workaround for this?

[@sweetcraftylicious]

Perhaps update/uninstall and reinstall your usb drive on your computer. Hope it helps.

[@krisnovosel7849]

the software worked for me after finding llibcutter etc now just need to find guidlines for newer product for use like infusible ink has anyone found something to help ?

[@jonzimmerman1754]

Correction: The Cricut worked on smaller cuts, but the software would freeze part way through the job with larger cuts. I discovered I didn't complete the firmware download the first time through. I didn't notice it required 2 updates in succession. After reading and following the instructions in Cricket Design Studio, I now have firmware V1.34 and the freeze problem is gone.

[@robinsorrell8261]

can you tell me why my cutter did not cut in the same location as how it showed on the preview in SCAL. SCAL showed that the image was going to start cutting in portrait mode in the upper left hand corner, but when I clicked "cut", it actually cut on the bottom right of the mat. thank you, the video is great!

[@sweetcraftylicious]

Not sure to be honest, I’ve never experienced that issue.

[@Akil-]

What about the newer models like the air2 ?

[@olgayasminguerraneira2367]

beun dia, voy a envair el corte pero no eefctua la funcion?? que puedo hacer??

[@tanyadouglas1632]

Does the demo version have cut grid lines on the stock card after cutting?

[@sweetcraftylicious]

Yes, it’s a trial version only.

[@anotherguy9402]

Crafty indeed 😉

[@daniellesalyer3725]

I am trying to do the step of updating the software, I followed the instructions of holding the stop and then power button until it beeps however once I hit update software it just doesn't do it. It tells me to go back to step 1 and I have done it several times with no change. Can you help me?

[@sweetcraftylicious]

Not sure what the issue is. You can always try contacting crafts edge customer service for help.

[@rosalind92505]

Hi, Your instructions are very clear and I hope I can get this to work. I get a message that my usb drivers are out of date or not properly installed. What can I do?

[@rosalind92505]

Okie dokie, I was able to update usb and everything worked, THANK YOU!!!!

[@sweetcraftylicious]

I’m glad you where able to figure it out!

[@rosalind92505]

@@sweetcraftylicious I was able to download the firmware update and downloaded the SCAL5 and the Libcutter but now SCAL doesn't detect my cutter. Any advise?

[@valeriehofmann2615]

is there an update for libcutter? or should i redownload it as im having issues with drawing

[@brandonhicks3389]

I read on another forum that you have to add a keys.h file. I noticed your video didn't mention it. Is that something that is automatically added in scal5?

[@sweetcraftylicious]

I don't believe so. Try following the steps in the video and let me know if it works for you.

[@RyanStockwell007]

Has any one had a problem with it cutting out the grid lines as well?

[@sweetcraftylicious]

It will cut 2 lines because you downloaded a trial. When you purchase the software, the lines will disappear.

[@jezeh559]

Hi ! Thanks for the awesome tutorial , greatly appreciate it. One quick question? If I have windows 10 do I need to purchase scal 4v ?? When I looked into purchasing scal 5 it does not give me option for windows 10 only XP/vista ????

[@sweetcraftylicious]

Purchase the regular Scal 5. It does support windows 10. Just make sure it works with the trial download before you purchase the software.

[@jezeh559]

@@sweetcraftylicious thank you ! I miss read lol , I understand now that I see the options. It states xp/vista / windows 7/8/10

[@sweetcraftylicious]

No problem.

[@jezeh559]

@@sweetcraftylicious I got everything downloaded, but when I try to make a cut a message appears saying to check usb ,unplug and wait 10 minutes. And after doing so I get the same message, does that sound like maybe my device is just not going to work ? Or is their anything I can try ? Thanks 🙏

[@angelicaocampo9798]

Thank you for this video. Is it possible to use the SCAL 5 with two machines (expression and cake) or do I need to buy it twice?

[@sweetcraftylicious]

No need to buy it twice. Just make sure the firmware is up to date on both machines and make sure your able to cut with the trial on both before you buy the full version of the software.

[@dpheaslip]

Thank you

[@jessicamcmorris5779]

I have a Cricut Cake v2.43, your tutorial lists compatibility with V1.54-2.34. Does this mean my Cricut is too 'new'?

[@sweetcraftylicious]

No, i believe the 2.43 should work fine.

[@jessicamcmorris5779]

@@sweetcraftylicious Thanks for the reply! I skipped the firmware update and followed the remainder of your instructions but my cricut didn't do anything when I tried a test cut. I was able to successfully select my cricut cutter after installing the libcutter plugin but my test cut wouldn't work. I thought the problem was my cricut version wasn't compatible (like the expression 2) and gave up. I'm no longer able to continue troubleshooting because my Sure Cuts A Lot trial version has expired :/ I tried uninstalling and reinstalling but still receive the error. Am I correct in thinking my options are to purchase the software and hope I can get it to work or try the test on a different computer?

[@Sabrina-ol6js]

Thank you so much!! I couldn’t find design studio ANYWHERE! Sucks that SCAL 5 is so pricey tho. It costs more than I spent on my cricut expression itself 🤣

[@sweetcraftylicious]

Yes it is a lil pricey but if you upgrade to a newer cricut machine you can still use it to design and transfer and cut in design space.

[@moniquedewit2777]

What a great video. I am trying to get my (old) Cricut cake to work with SCAL5 and Mac Catalina (10,15,7). when I download the libcutter I get the message that the program is not compatible with the version of my Mac. can you help me?

[@sweetcraftylicious]

Did you download the Scal 5 trial for Mac?

[@moniquedewit2777]

@@sweetcraftylicious yes, I want to buy but first want to try it.

[@moniquedewit2777]

@@sweetcraftylicious can you help me?

[@thealikat9]

I had the same error... You need to open the zip file by left-clicking on the zip folder and then select open with "installer (default)". Download the zip file, double clip download to unzip, try to open (it will say unable to because the app developer is not Apple supported) then left-click the file to (Open with Installer (default)) and follow the steps, it worked for me!

[@thealikat9]

For the Libcutter firmware select the second option for Mac: ufile.io/1xd6b, the first link didn't work for me either

[@stephanieskegas3501]

Will this work with the Cricut imagine?

[@sanjuanitasaenz9079]

Hello, Sweet Craftylicious! I am so thankful for this video, I was able to install everything and get it working on my PC, but on second thought would love to have this available on my MacBook to create on the go. I've uploaded everything which seemed to work as you showed, but when I go to cut it freezes and my Cricut expression does not respond. Do you have any suggestions?

[@dearthaliarocha]

Following

[@sweetcraftylicious]

Did you download the Mac version of the trial? I’m not sure what would cause that. I do however know that if you buy the windows version of Scal5 it can’t be used interchangeably on a Mac. It has to be a special license that costs a little more. Check with the Craftedge customer service , their contact info is on their website.

[@sanjuanitasaenz9079]

Sweet Craftylicious I downloaded the Mac version but now that you mention it, when I purchased SCAL5 I must have bought the PC version. I will try to contact craftedge. Thanks for your help.

[@sanjuanitasaenz9079]

I wanted to give you an update. I updated some things on my Mac, cleaned it out and and re-downloaded the SCAL 5 (this time the Mac version) and the lib cutter extension! It worked! I'm gonna be able to travel with my laptop and my expression! Thank you so much for your video!!!! I'm soooo excited!

[@deliaclaros8396]

It does not do anything to my computer😢,,, do I need to download driver for windosw q0?

[@amandaboffice6553]

Do you need a special cartridge?

[@sweetcraftylicious]

Any cricut cartridge will work.

[@sandramartins5490]

All I have to say is thank you !!!!!!!!!!!

[@jonnylee4451]

Thank you!

[@lisawilson7332]

Thank you so much! What is the cost of the license? Is it a monthly subscription or a one time purchase? I have the Expression and was so disappointed when I couldn't get computer based program to work on it because it was an older machine and I hated to spend $$$ on an updated one. I will try this tonight to see it it will work.

[@sweetcraftylicious]

It can be purchased at svgtools.com for about $48 US dollars .

[@sharonmcdonald696]

Thank you for this. It has really helped me a lot. Can I ask, once I have set up my Cricut Expression 1 with SCAL5 and Libcutter does the Cricut machine have to stay connected to my laptop all the time or can I just connect it each time I want to do something. Thank you

[@sweetcraftylicious]

You shouldn’t have any issues if you connect it as needed.

[@sharonmcdonald696]

@@sweetcraftylicious Thank you for your reply. This helps a lot. My craft room is outside in a former garage and I use my laptop in the house.

[@TracyJ.Martin]

Do you know if Scal 5 will work on the cricut imagine?

[@sweetcraftylicious]

It does not work with the imagine.

[@tylerhansen9130]

So can you use this software and make custom decals and cuts with a cricut expression like the newer cricut machines can do?

[@sweetcraftylicious]

Yes.

[@Rollerlady13]

Thank YOU !❤

[@sweetcraftylicious]

You’re welcome!

[@3c_guitars]

My cricut is not discovered by usb i upated the usb drivers but nothing even yried to update thru ports any tips? Cable is good and i get the chimes that its connected

[@sweetcraftylicious]

I would uninstall and reinstall the usb drivers. Hopefully that helps.

[@nikkidoodlesx3]

is there any third party software (or anything in general) that would work with the expression 2?! I got this machine a couple months ago and wanted to get into using it but I feel like its just a brick at this point 😥 and I dont have $100+ for the newer stuff.

[@sweetcraftylicious]

Unfortunately I don’t know of any software that is currently compatible with the expression 2. You can however use cricut cartridges, search your local marketplace for them.

[@vesuviocinematics472]

Thank you so much for your efforts in making this video - I managed to get a used cricut personal cutter at a bargain the firmware shows 1.34 and i managed to get everything setup as per your video...but i have a problem. When i use my cartridges(george and basic shapes ) i can cut directly from the machine without any problems....but as soon as i cut from SCAL5 i end up with letters that are cut incomplete..weeding is a nightmare as i can see some letters are cut 75% through and here and there it is asif there is no pressure applied to the vinyl leaving it uncut. Any idea why this is not cutting properly. Even doing shapes in scal 5 it will cut a heart but only some areas are through some areas are uncut almost like it just scraped the vinyl slight cutting but not through. Would really appreciate your feedback if you know how i can fix it or what is going on?

[@sweetcraftylicious]

Perhaps adjust the depth of your blade directly on the blade holder?

[@vesuviocinematics472]

@@sweetcraftylicious Thank you it was a firmware problem. Just needed to update my Sure Cutsalot

[@nathancanfield9925]

Anyone with an expression that has done this and has issues with it missing a portion of the cut after it turns a 90° corner? If I cut from the cartridge and make a square, it cuts great. Paid for SCAL5 and installed, updated drivers on the expression and got the libcutter installed. Can send a complex drawing and it does it, but misses bits. Can send a simple square from SCAL5 and same issues, misses sections of the cut. I dont get it, why should it not cut from the program when same settings do fine from the cartridge?

[@sweetcraftylicious]

I haven’t ran into that issue, I recommend you contact craft edges customer service they should be able to help you out with that issue.

[@nathancanfield9925]

@@sweetcraftylicious thanks I will get in touch to see what they can tell me

[@hikarii-kun2698]

Hi, I just bought a Cricut Expressions, it is on v2.35. Will updating the firmware automatically bring it to 2.43? The program was able to register the data but not cut so I am wondering if the firmware is the final key

[@sweetcraftylicious]

Yes firmware needs to updated.