UT Porosity Thru Wall Sizing

  Рет қаралды 11,358

john burke

john burke

Күн бұрын

Пікірлер
@gerardomorfin5432
@gerardomorfin5432 4 жыл бұрын
Awesome information for us the not so experienced with defects characterization
@pk143realvoice
@pk143realvoice Жыл бұрын
Very nice video of ut indication detected
@allwinthivan6795
@allwinthivan6795 Жыл бұрын
Sir tell me 1:1 diagram beam profile how to
@dudeabc100
@dudeabc100 4 жыл бұрын
Sir, it was a nice video. However i have a question, Is there a possibility that the technique that you just demonstrated to size the through wall height would give more accurate results in case of planar flaws as compared to such volumetric flaws? I noticed that there were a bunch of trailing signals of varying amplitudes (which was mentioned as broad signal envelope) as you were moving the probe back and forth towards the weld center line and also while orbiting. These signals are possibly coming in due to some mode converted signal set, for instance one component of the wave would have possibly hit the face of the flaw, there would have been some mode conversion to L-waves and after some reverberations L wave converting back to shear waves and back to the probe, so here the overall time of flight or the path taken by the waves would be longer giving rise to a bunch of trailing signals. Based on the geometry many such mode converted paths are possible. In the scenario as shown above there is a high possibility that while moving back and forth we are possibly hitting the same spot of the flaw but we are getting different depths possibly due to the change in path length or time of flight variation caused due to mode conversion. The through wall height measurements could possibly have some variations if you hit this same flaw from the other side of the weld due to some subtle changes in the geometry. Having said that sometimes we may get lucky that the through wall height measurements of such clustered porosity would tally quite well with the measurements as given by the manufacturer (Sonaspection, flaw tech, Ph tool etc.) but this may not happen always. If we take say about 5 to 6 samples of clustered porosity with some varying overall geometry, definitely there would be some samples where the overall through wall measurements wont tally with the measurements (based on radiography and which would be quite accurate for such volumetric flaws) as given by the manufacturer. The reason is purely due to the mode converted paths taken by the beam and which is very difficult to trace using a conventional single crystal approach. In order to accurately gauge the through wall height irregardless of the geometry we need to go on a tomographic approach where multiple mode converted paths are captured by the probe using an array of elements and each of this raw A-scans are evaluated for there individual time of flights. Please note a conventional phased array approach will also give similar results to the one as shown above. Lastly was this sample radio graphed?
@maneeshmishra6441
@maneeshmishra6441 4 жыл бұрын
Sir your video guidance me.thanks to create this video's 👍
@hlehrlich
@hlehrlich 4 жыл бұрын
Who manufactures that plate?
@johnnyb28227
@johnnyb28227 4 жыл бұрын
Hello Hayden. That plate was manufactured by Sonaspection, sonaspection.com/ I also have plates manufactured by FlawTech, www.flawtech.com/ Both suppliers provide world class products.
@hlehrlich
@hlehrlich 4 жыл бұрын
john burke very cool, thanks for the reply.
@rodstephens742
@rodstephens742 4 жыл бұрын
Very nice!
UT 6dB Drop Defect Thru Wall Sizing
7:42
john burke
Рет қаралды 19 М.
UT Sound Beam Profile Using IOW Block 20dB Drop
12:13
john burke
Рет қаралды 10 М.
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 700 М.
Сестра обхитрила!
00:17
Victoria Portfolio
Рет қаралды 958 М.
Мясо вегана? 🧐 @Whatthefshow
01:01
История одного вокалиста
Рет қаралды 7 МЛН
dB Drop for Sizing Crack Height
4:41
Holloway NDT & Engineering Inc.
Рет қаралды 10 М.
UT Weld Porosity Signal
4:51
john burke
Рет қаралды 12 М.
UT 6dB Drop Defect Length Sizing
8:28
john burke
Рет қаралды 21 М.
Inside the V3 Nazi Super Gun
19:52
Blue Paw Print
Рет қаралды 2,8 МЛН
Basic Angle Beam Calibrations
5:06
Holloway NDT & Engineering Inc.
Рет қаралды 18 М.
Episode 1   Flaw Signal Characteristics
19:36
Ultrasonic Testing - Demystified
Рет қаралды 33 М.
Ultrasonic Skip Distance and V Path Math
8:08
Lance Henderson
Рет қаралды 6 М.
Twin Peaks - UT Root Signals
4:58
Holloway NDT & Engineering Inc.
Рет қаралды 15 М.
UT on Backing Bar Welds
5:34
Holloway NDT & Engineering Inc.
Рет қаралды 10 М.
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 700 М.