installing the OEM hand guards on my 2015 Vstrom 1000 Follow me on Instagram / riding_with_josh
Пікірлер: 30
@ayyodele2 жыл бұрын
I watched your video like 2 times, afterwards I grabbed the new hand guards I have bought for over a month but skeptical if I won't flop fixing them. I effortlessly mounted them without no hitch. All thanks to you, very happy. PS: only thing I noticed is that the clutch side lap and fit neater than the brake side, I have however test rode and all seem okay.
@ridingwithjosh43642 жыл бұрын
Happy it helped you out!
@ff2346cookson3 жыл бұрын
Thanks so much, Josh..... excellent instructions....doing mine tomorrow on a gsx650f....
@ridingwithjosh43643 жыл бұрын
You're welcome Steven. Thank's for watching! Good luck on yours.
@raypowell45883 жыл бұрын
Thanks Josh. Very helpful. London England 👍🏻
@ridingwithjosh43643 жыл бұрын
Happy it worked out for you!
@caco67984 жыл бұрын
Hey brother, great video!!! Thank you very much!!!!! Ride safety out there!
@ridingwithjosh43644 жыл бұрын
Thank you! You ride safe as well
@scottburgess10354 жыл бұрын
Thank you for creating this, it is very helpful.
@ridingwithjosh43644 жыл бұрын
You're welcome
@MarcusVinicius-yq3qw3 жыл бұрын
Thanks... I'm from Brasil and it helped me a lot.
@ridingwithjosh43643 жыл бұрын
Thanks and your welcome! Ride safe
@govindarajann76462 жыл бұрын
Hey Josh, thanks a lot for making this video, very helpful. I'm trying to install handguards on my Suzuki V-Strom and I have run into the problem you mentioned in the video. While unscrewing the bar end, I tried my best to pull it outward to shift the nut inside the handle bar but probably not enough, it was just way too tight. Now I can't reach the nut with the new bolt to screw in the spacer. What could I do? Any ideas will be helpful. Thanks a lot, Govind
@gusmetralhao5 жыл бұрын
THANKS jOSH
@paulsilva33465 жыл бұрын
Next Step is the use of MIRROR extensions.! On eBay, or Amazon. I have pics...
@ridingwithjosh43645 жыл бұрын
Think im gonna put the ram mount mirrors on it
@treasuried2 жыл бұрын
Thanks Josh. Very helpful. Once I have pulled the nut and installed the handguard, it's not necessary to to pull it again, ok? I already have a handguard installed and just want to change the bolt, so I guess the nut is in the correct position, ok?
@24HALL2 жыл бұрын
You don't have to pull it all the way out but you will want to pull it halfway way before removing the bolt or you will find it hard to get it back threaded again
@treasuried2 жыл бұрын
@@24HALL Ok. Thanks again man! Good job!
@ThatDude3183 жыл бұрын
I definitely pushed the nut back into the handle bars like you said not to… unfortunately I saw this video after I attempted to do it on my own… 🤦🏼♂️
@ridingwithjosh43643 жыл бұрын
Hey I've done it also. Live and learn! Ride safe
@MaynardFreek2 жыл бұрын
@@ridingwithjosh4364 I did this also. How did you retrieve the nut? Edit: Nevermind, I used a skinny flat head screw driver to fish out the rubber wedge and used an old medical hook/pick to fish out the washer and nut
@juanmacaballero-mo6yn Жыл бұрын
@@MaynardFreek I have the exact same problem right now: can't reach the nut at the end of the knuckle: can you explain a little more how you managed to "fish" it back? Thanks!
@robertp93704 жыл бұрын
hey man I have an ugly/damaged bar weight on my 09 dl1000, well I bought a new one and I'm wondering if it is as easy as just taking the screw out, taking off the old bar weight, putting the new one on and then screwing it back in... does that sound about right or am I going to mess something up on the inside like you were saying on this video. please help, new to motorcycles. thanks in advanced >.
@ridingwithjosh43644 жыл бұрын
It is that easy long as you slode it out a little like I did or you won't be able to get bolt to thread back in. Just loosen a little slide it out half way to a little more the finish unscrewing. You will be able to remove old bar weight, install new one and be able to thread bolt back into nut plate inside bar. Hope that helps you!
@robertp93704 жыл бұрын
Riding With Josh I’m glad I saw your video then because I was about to just unscrew it and put the new one on.. I’ll make sure to do just like your video
@ridingwithjosh43644 жыл бұрын
@@robertp9370 happy it was of help to you! Ride safe Robert
@howardabrahams55902 жыл бұрын
Hi Josh, will these hand guards also fit on the 2014 1000 V Strom, many thanks