Valken M17 Less Lethal - Critical Situations New Improved Bolt Spring

[@nomorewars1366]

Nice video you got a link to the ALIEXPRESS ON/OFF ASA?

[@lesslethalfordummies]

Ill do another video today and link it in the description. I think an error on my part was not opening the on/off fully.

[@Paulo-ne3sy]

I'd love to get my hands on this spring, or even a new original boltspring. But the critical situation website won't let me enter. And here in EU Valken has stoped to offer any parts😢 no Bolts, no springs, almost nothing. I Screwed up a Airchamber AC cap, and had to search for a whole new Airchamber which I payed 50€ on. How is the situation for parts in Canada? I need a Heatcore Alignment Tool, I tried everything to get one, but no chance. Makes me insane. I miss them old Milsig days, when you just talked to them, and they would supply you with every part you needed. most of the time without even charging you.

[@lesslethalfordummies]

HomeDefence-24 has bolts springs among other things if you need one. Woh alignment tool? You are going way back. 🙃 I used to order stuff from the old Milsig shop in EU as well. Delivered to Canada in a week. Beauty service. I miss that.

[@mattbuildschar7047]

Do u have any informative videos on converting a uramex tac to be used with a hdp50? I already know i need to switch out barrels and drill a hole into the hdp for the pin in the back.

[@lesslethalfordummies]

I never did get my hands on the Umarex Tac. Funny enough it also fits the Tipx.

[@mattbuildschar7047]

@@lesslethalfordummies it will be great once I put my hdp50 in there

[@lesslethalfordummies]

I do like the Tac it is very minimalistic compared to some of the other options out there.

[@mattbuildschar7047]

@@lesslethalfordummies that's why I got it. It's easier to.trasport for work

[@runerebel8441]

Interesting video as always. So the velocity dropped a little. Will you put the old springs back?

[@lesslethalfordummies]

I may move this spring to my modified regulator for the time being but not before i send some more rounds downrange. I lost about 20fps which is more then i would like the way i have my marker setup. This spring probably suits more output pressure better and imagine the drop would be less significant as such.

[@ForrestGumpPSP]

Please, do you have any advice on where to buy a similar spring at a normal price? :) Wire is 2mm? Thank you.

[@lesslethalfordummies]

Nothing have used has worked as well as the CS or HD24 spring. I did run an Fsc spring and Tipx spring stacked with good success but it distorted after only a couple hundred rounds.

[@mr.somageokef]

do you recomend the spring then and where do you get the mostafa bolt spring differences

[@lesslethalfordummies]

I believe a bolt spring is a requirement for long term reliability. If your factory bolt spring is good and you get no autofire i would just roll with it knowing it will need replacement sooner then later. criticalsituations.co.uk is where the springs are found.

[@thellc24-7]

Nice! I'd lime to see the Ling term results on that new spring💥💥💥

[@lesslethalfordummies]

💯 durability and reliability are #1 goals here.

[@NuisancePanda]

So, I just did my PRV delete, and added the third bumbper/ washer thingy today. What can I do now as far as turning up some of the power? And what kinda power *should I be getting with the PRV delete, the third bumper and a 12 in Lion Claw barrel? I definitely do not have the money for a chronograph lol

[@lesslethalfordummies]

If you are still using the velocity adjustment screw….setting the screw flush with the cap is about safe max for the velocity cap.

[@NuisancePanda]

@@lesslethalfordummies underneath the FPS adjuster is flange that the old Hinge-Guide attached to. Should I take that off? And tighten the FPS bolt down flush?? (again bro.. BRAND new at this sorry if this is common knowledge)

[@NuisancePanda]

@@lesslethalfordummies nevermind bro!! I totally see what you meant.. What kinda power would you estimate I'm making now? And what's the next thing I should do to bump up the power? (wanna find that happy medium where it's juiced up, keep it reliable)

[@lesslethalfordummies]

@@NuisancePanda the thin fork metal is a locking device to keep the cap from backing out. You should leave it in place. Velocity screw should be no more then flush that is correct.

[@lesslethalfordummies]

@@NuisancePanda Power is all dependent on tank output pressure, barrel length, projectile weight/bore.

[@poopoosplatter99]

I've ordered a couple (multiple tanks) of those on/offs and also some female-male-female T's, and some bleed valves. Should work good.

[@lesslethalfordummies]

Now that I have had some time with this on/off it does function very well. I wish it wasn’t nickel plated tho….black would be my choice.

[@dominikmietlakov2588]

@@lesslethalfordummies Great movie! I'm from Europe and I don't fully understand all the dialogues in movies. 😕 I'm watching You or Spencer. 🙈 Can you list in bullet points what I should do with my M17 CQMF to achieve performance like yours? It's for home defense, so power and accuracy at longer distances need to be maintained. I would be very grateful for such help. 🙏🏽

[@lesslethalfordummies]

@dominikmietlakov2588 Try watching this 6 part series i did. kzbin.info/aero/PLg0HHHOXzYU6NOVnTTzV2i1xvMy5U4aFV&si=sQh2nGWSI51I74uf

[@dominikmietlakov2588]

@@lesslethalfordummies thank you! Do you think I'll manage all of this on my own, considering I've never disassembled a marker before? 😄

[@lesslethalfordummies]

@@dominikmietlakov2588if you take your time and follow the steps things should go relatively problem free.

[@gregreaves]

Great video bro. I haven't installed my spring yet from them.

[@lesslethalfordummies]

I am hoping to get a chance to run through some more tests today. I actually think i didnt open the new on/off fully. 🙄

[@alexsantos7815]

Where’s the optic from?

[@lesslethalfordummies]

The red dot is a raise to wake Feyachi from Amazon. It works very well.

[@markklos]

Hey! What's that hand grip?

[@lesslethalfordummies]

Thats is the factory Cqmf handgrip believe it or not. One of my faves.

[@jerryhoneycutt745]

I see the new spring has slowed down fps. What's your thoughts on its performance with 1100psi tank

[@lesslethalfordummies]

You are correct this spring is not ideal for a standard bypassed reg at less then at least 900psi is as high that i have tested so far. I believe its design was based on higher output and/or one of the new high flow regs thats going to hit the marker here pretty quick.

[@aclesslethal]

Although my first comment, I have been watching your M17 videos everyday and have been very locked into them. Great job! I did the 3/16th drill bit mod and all the deletes. I am running 1100 psi for my first shots with it. Holy Crap that thing sounds like a shotgun. LOL! Neighbors hate me I am sure. Two things. Where can I find the SMG Mattel for that so I can use the Tipx mags and where can I find the barrel and mock and suppressor I am seeing on this video currently watching? Thanks man. Continue the great work

[@lesslethalfordummies]

Always appreciate the comments thanks. Yes these things are quite loud. Actually very loud. The smg magwell is available at Rockstars Tactical or Valken. They have been out of stock since December but hopefully back soon. The barrel is amazing using it the videos is a Lapco Tipx 8” Big Shot Assault 0.684 smoothbore. You can find it at most paintball shops and the mock suppressor is also from Lapco known as the universal suppressor. It just went through a redesign so it may be scarce at the moment. Might have to check Lapcos website for availability.

[@DawsonDave-YZF-R6]

🤩Hey Shawn ✌✌Mikey shut down Im finally getting close to buying a M17 ! Do you know a good place to buy one, even used here in B.C ? Thanks for all your vids man great times watchin ! Super information !!!!!

[@lesslethalfordummies]

I saw a few locally on Craigslist but if you go to Valken.ca now the Cqmf is only $289 Canadian dollars. Thats a steal compared to even buying used.

[@DawsonDave-YZF-R6]

@@lesslethalfordummies Awesome Thanks 🏁

[@poopoosplatter99]

I love how Mikey "shut down" after he took my money. What a piece of work

[@DawsonDave-YZF-R6]

@@lesslethalfordummies Thanks man 🤟I finally got one ordered 🏁🏁🏁CQMF with TANK on-off and 2 extra mags less than $500 🤩

[@lesslethalfordummies]

Not too shabby. It’ll be fun!

[@JasonKeith-qn2mb]

Love your content Sean 😮

[@lesslethalfordummies]

Thanks my friend. 🙂

[@desmonddoss6718]

Hello, Super vidéo, Bon Dimanche 👍🇫🇷🇨🇦

[@lesslethalfordummies]

Thanks my man 👍🏼

[@SpACeCruizeR2o3]

Lol fug safety glasses u need a shield man last time I was shootin the pan I got ricocheted in the neck peice it actually left a Lil red mark too jus saying of course in a crazy situation which I feel we should be preparing more fir like actual attacks and drills cause shyt happens fast and u gotta stay wit something on the hip at all times it's sad the way the world 🌎 is 💥💥💥 but if it came down to it......are we ready??

[@lesslethalfordummies]

A shield could be a good decision but i am quick on my feet 😉🥊. Most people arent ready.

[@travperk]

WHATS UP BROTHA ! 🥳 🎉 🪅 🎊 🍺 🍻 Working all the time working working 15-hour days I my goodness brother I'm sorry if I hit the lottery I'll send you a little something I'm serious hope you're having a good day is over there also great video 📹 👍!

[@lesslethalfordummies]

All is well. The work we do takes place in a very limited fisheries window. Legally we can only work 15hrs otherwise they might keep us longer. Thanks for stopping by.

[@tuckerdelay9656]

15 hrs a day is no bueno

[@lesslethalfordummies]

I just have to remind myself its only for 2 months 😆

[@JohnWixon]

Just repeat.. "Marker money, marker money, marker money..."