This video made me realize that I could do this, but that I don't want to. So thank you.
@MartinSage3 жыл бұрын
It's not hard, just time consuming.
@vinnychoff4 жыл бұрын
Brilliant video not in my language but I could see what is needed. Thank you Rainer
@NeuroProctologist9 жыл бұрын
Thanks by the way. I've only worked on older bikes so was a little unsure if I wanted to try this myself. Seems pretty straightforward actually. So much better than rocker arms!!
@dougiequick111 ай бұрын
If it is so much better why are speed triples only 10kmile serivce and Yamaha is 24k miles?
@NeuroProctologist11 ай бұрын
@@dougiequick1 Because....uhhhhhh 8 years ago (jfc) when I made this comment the handful of bikes I'd worked on (which I'd mentioned were older) with rocker arms were less simple than the valve adjustment I'd done on this bike. And yeah, I'd still happily do adjustments twice as often if I found them easy to do, but I am not asserting that's the case with any modern Yamaha because I have not worked on one. Satisfactory answer or do I need to make some performative gesture of brand loyalty?
@Nzchimeran7 жыл бұрын
Even without English this is a very good video of step by step.This engine seems not that hard to work on, I should buy one
@henkyjay2 жыл бұрын
Chris Jones soundtrack! Love it! Good video👍🏻
@RitchieMonroe8 жыл бұрын
Great vid and editing. Thank You
@roynexus610 жыл бұрын
Thank you for posting this. This is a great supplement to service manual.
@TRiumphTR3a10 жыл бұрын
Thank you. You´re absolutely right. The video should only deliver additional information to your maintanance manual.
@ricardorodrigues037 жыл бұрын
Really nice video, thanks!
@sandronovecento769 жыл бұрын
Wunderba!
@dougiequick111 ай бұрын
Damn it used to be so simple to check and adjust valves on a motorcycle ...now it is a nightmare comparetively
@haraldl.35264 жыл бұрын
Für taubstumme Motorradfahrer ein Traumvideo! Das Video macht mich ganz g..l auf meine Gitarre.
@mdhmsmith6 жыл бұрын
Thanks!
@kentwiley1067 Жыл бұрын
Great commentary
@gerhard63717 жыл бұрын
Rainer darf ich etwas fragen bitte ? ich hab im Triumph Forum gelesen das die Armaturen meiner speedy oder besser der meisten 1050 Baujahr 2007 nicht 100 % wasserfest sind beziehungsweise nach einer Regenfahrt schaden nehmen könnten sprich elektronik in der Armatur ? ist da was dran und was kann ich im Vorfeld machen damit das nicht passiert !! bin neuer speedy besitzer und keine Erfahrung! danke im Voraus für deine Antwort! gruss Gerhard
@olly91725 жыл бұрын
Tolles Video, danke für Ihre Mühe. Bitte: Welcher Song von Chris Jones ist das ?
@markov328P Жыл бұрын
Ok, how did you install back the cam chain tesnioner, how did you reset it and put it back exactly?
@libertyman30726 жыл бұрын
💪👍💪👍💪👍💪👍💪👍💪👍💪👍💪👍
@asbhlz19652 жыл бұрын
Can you do a video about adjusting the tps and iscv?
@Rudi23059 жыл бұрын
hallo, super Video! Schaut einfach aus ;) bei welchen km. stand wurden die Ventile eingestellt?
@norberthollo94602 жыл бұрын
Hallo Rainer, Ich habe Fragen: Warum 285 Shims? Wo kann ich Shims kaufen? Danke
@1amercat11 ай бұрын
Thanks for video! What are symptoms for valve checking?
@RR-2mn8 ай бұрын
10000 Kilometer or ticking noise.
@inzinzinzinz7 жыл бұрын
Danke für das Video! Bei 04:15 ungefähr schiebt ihr etwas zum blockieren an die Steuerkette, warum? Muss man das vor dem Ausbau des Steuerkettenspanners?
@TRiumphTR3a7 жыл бұрын
Hallo, nein da wird nichts blockiert. Ich zeige nur mit einer Reißnadel auf die Pfeile der Nockenwellenräder. Die müssen zueinander zeigen.
@johnrambo71272 жыл бұрын
Chodzi o ten klin kiedy wyciągasz napinacz rozrządu po co on jest ?
@bigwheelsturning6 жыл бұрын
It has buttons under the caps like a Yamaha. It's a Moto Guzzi for me!
@klausahrens46425 жыл бұрын
Also du meinst genauso wie eine Suzuki?
@dailybikelife31055 жыл бұрын
Hello can anybody please help me rearrange my speed triple 1050 shims, I mixed it up .. any help how to go about it....
@Voiteck23 Жыл бұрын
what is that music there ?!
@jerryx2000 Жыл бұрын
hast du die Maschine noch? Hat es Ölverbrauch oder andere Sorgen?
@TRiumphTR3a Жыл бұрын
Hallo, ja die Speedy habe ich noch. Hat jetzt 50.000km drauf - keine Probleme.
@jerryx2000 Жыл бұрын
@@TRiumphTR3a geile Sache
@cristianocollarin22366 жыл бұрын
I checked the valves on my Speed Triple at 20.000km. Now she is 40.000km. Is it time to check again? Thank you
@TRiumphTR3a6 жыл бұрын
Yes, that´s the maintenance interval.
@wildracoon68073 жыл бұрын
Hi, can you tell me the valve clearance tool dimensions? please, im so desperate bcz its hard to come by.... :(
@corvinlord10 жыл бұрын
Hi, this is great stuff! I was going to do 12k service for my Street triple soon. But in the manual can't find a diagram that instructs when to measure valves (in terms of TDC). Do you always measure clearance when the valve is pointing up?
@terenceokeeffesmotorcyclestuff4 жыл бұрын
When the cam lobe is pointing up yes. Did you ever do it? :-)
@alicialinenaguilera24978 жыл бұрын
That's what I call a pain in the ass!
@xavierperreaut11377 жыл бұрын
at 7:30 on the video, it seems you put the inlet ("IN") cam shaft instead of the exhasut ("EX") cam shaft !
@eskertoo5 жыл бұрын
In fact both camshaft sprockets are stamped EX and IN.The inlet camshaft has a groove machined into it near the centre.This is described in the manual as the only identification mark.
@nellaRissa3 жыл бұрын
you check valve gap for outter valves but not for the middle two , why?
@TRiumphTR3a3 жыл бұрын
Of course you have to check all valves. Only in this vid I have showed a part of the procedure.
@nellaRissa3 жыл бұрын
@@TRiumphTR3a thank you for the answer, i don't speak deutch so images were the only references ;)
@brauseben4728Ай бұрын
Hallo,ich habe eine 2006 515nj und habe Probleme mit Zündausetzern. Letzes Jahr kamen neue Zündkerzen rein dann lief sie bis jetzt gut aber am Wochenende eine lange Tour gemacht und ich hatte die zündaussetzer wieder. Was kann das sein? Wieder neue Kerzen rein? Das kann’s doch auf Dauer nicht sein. Kannst du mir bitte weiterhelfen. Gruß Ronny
@TRiumphTR3aАй бұрын
Sorry, aber das kann man aus der Ferne nicht beantworten. Das kann eine Zündspule sein, Kabelbruch etc.
@peteralexander11553 жыл бұрын
How many hours will this job takes?
@TRiumphTR3a3 жыл бұрын
2-3 hours
@peteralexander11553 жыл бұрын
@@TRiumphTR3a Thank you
@willl7780 Жыл бұрын
the older triple was shim over bucket...you could do the job without taking the cams out....this is better though
@w96as5 жыл бұрын
Ich habe eine Frage zum Sattel: Ist dies eine Soziusabdeckung oder ein ganz anderer Sattel? Gefällt mir sehr gut und würde es in Erwägung ziehen dies bei meiner Speedy auch zu verbauen. Hast du mir einen Link wo ich den Sattel/Abdeckung kaufen kann? Vielen Dank
@TRiumphTR3a5 жыл бұрын
Hallo, es ist die als Zubehör erhältliche Soziusabdeckung von Triumph: www.worldoftriumph.com/triumph_motorcycle_parts_locator?block_01=&block_02=1000360-11-2&block_03=610315
@MartinSage4 жыл бұрын
Wish the music was replaced with talking me step by step. I play guitar but not when I am doing critical MC tunes.
@kwisclubta71752 жыл бұрын
He was actually playing the guitar with his toes while doing the adjustment. Quite astonishing, really.
@Natter0815 Жыл бұрын
What’s the name of the part/group at 1:47?
@TRiumphTR3a Жыл бұрын
That´s the secundary air injektion.
@Natter0815 Жыл бұрын
Hey, my reed valve cover just burned true. I lost a screw while I was driving. Should I open the cam cover to see what happened there? And if I do, should I replace the cam cover seal? Thanks in advance.
@granto67383 жыл бұрын
Do I think 🤔 it needs doing at 12.000 miles 🤔
@urbanfireblade Жыл бұрын
Old comment but for anyone else's reference they rarely need adjusting at 12k miles. Based on forums i searched and mine and a friends Speed Triple experience(2009 models). Triumph charge £400-500 to check them, if they need adjusting its another hours labour aka £100.
@granto6738 Жыл бұрын
@@urbanfireblade thanks bud
@The_Think3r10 жыл бұрын
Ohje Ohje ... Ventile werden zum prüfen nie nach oben gedreht. Du hast dadurch ein falsches Ventilspiel. Nockenwellen aus oder einbau empfehle ich auf überschneidung zu machen (der druck auf dem Nockenwellenbock ist dadurch viel geringer und die Gefahr das die STeuerkette überspringt ist geringer.
@alicialinenaguilera24978 жыл бұрын
lol
@MartinSage3 жыл бұрын
Wish i spoke Deutch😩
@TRiumphTR3a3 жыл бұрын
Use the google translater :-)
@destinc29804 жыл бұрын
Terrible choice in music. Js
@bmulli1210 жыл бұрын
Yea cool that's an explanatory video. NOT. SHITE.
@TRiumphTR3a10 жыл бұрын
Sorry, this should not be an explanatory video. It´s only additional information to your workshop manual.I just wanted to point out the simple valve adjustment in order to overcome peoples fear.
@NeuroProctologist9 жыл бұрын
Cool attitude. Don't worry about it anyways. People like you don't even need to adjust your valves. Just let karma do it's job. ;)
@dailybikelife31055 жыл бұрын
@@TRiumphTR3a Hello can you please help me rearrange my speed triple 1050 shims, I mixed it up .. any help how to go about it....
@gerhard63717 жыл бұрын
Rainer darf ich etwas fragen bitte ? ich hab im Triumph Forum gelesen das die Armaturen meiner speedy oder besser der meisten 1050 Baujahr 2007 nicht 100 % wasserfest sind beziehungsweise nach einer Regenfahrt schaden nehmen könnten sprich elektronik in der Armatur ? ist da was dran und was kann ich im Vorfeld machen damit das nicht passiert !! bin neuer speedy besitzer und keine Erfahrung! danke im Voraus für deine Antwort! gruss Gerhard
@TRiumphTR3a7 жыл бұрын
Ja, das stimmt. Hört man hin und wieder. Habe selbst keine Probleme damit, wird auch nur wenige betreffen. Gruß Rainer
@gerhard63717 жыл бұрын
Herzlichen Dank !🤗
@TRiumphTR3a7 жыл бұрын
Bei Fragen am besten Mal unter www.t5net-forum.de/forum/ vorbeischauen. Größtes Triumph Forum mit netten Leuten.