Vans RV-8 Left Tank rear baffle install Ep 60

This is the completion of the left fuel tank. I got the fuel sender installed in the rear baffle bay 2 and got the baffle sealed and riveted to the tank. This will now cure for the next couple weeks while I am on a work trip. Leak test will be done as soon as I get home. Hope you all enjoy. Please leave your questions or comments down below.
Listed below are my affiliate links to some of the tools you have seen me use on this channel so far. If you are going to buy them anyways then I appreciate the support. Hope you enjoy and leave your questions or comments below.
Silicone Sealant spatulas amzn.to/3RHBk02
C Frame and squeezer yokes clemsonaeronau...
Endoscope amzn.to/4afKjvD
Label printer amzn.to/49lFlx6
Welder amzn.to/3uLht81
Measuring etc:
Machinist Square amzn.to/3T1F4t9
Combination Square amzn.to/49X6ffy
Straight Edge amzn.to/3V3xVv0
Angle Finder amzn.to/3T43dze
Epoxy Resin work:
3M respirator mask amzn.to/3uJDT9G
Rubber Gloves amzn.to/3Tk9XKz
Digital Scale amzn.to/49Zuyth
Mixing cups set amzn.to/4bT0UYp
Self Etching Primer amzn.to/48FBrPp
Sanding Block amzn.to/4bYH51E
Rasp amzn.to/4bYRYk8
File Set amzn.to/49y10mw
Sanding Sponges amzn.to/4c1kXng
West Systems Resin kit amzn.to/43hVYbL
Electrical:
Magnifying Lamp amzn.to/48Bcqoh
Molex Micro-fit connectors amzn.to/3uRKO0t
Cable Snap Bushings amzn.to/48U3ACt
Dupont crimp tool amzn.to/49BmdMw
Helping Hands amzn.to/432ScTl

[@stevenwilkes5737]

Let it cure nose up to help the back baffle sealant beads to sit where they need to seal, let gravity help you, build on!!

[@TFlight77]

Thanks I did pull it out of the cradle after i finished and it’s sitting nose up for the cure.