Vector USD-8 Service for fork

[@SimplePleasuresMTB]

No oil? I have the USD 6 Air and want to know the oil capacity. Any ideas anyone??? Thanks

[@dis_hucker]

nice video, i have just bought a set myself and will be doing a review soon with some big jumps and drops!

[@Kimx922]

Thanks for a great and informative video on service on these forks! Really helpfull for a newbie 🙈😎

[@robupton267]

What’s the stock coil rate and total coil length? Thanks for the video, there’s zero tech information out there on on these forks.

[@SimplePleasuresMTB]

Rob Upton exactly, I bought the USD 6 but the instructions are crap. No specifications of any kind. I just want to know my oil volume and if they came shipped with oil in them or not.

[@jonezdatonetech2758]

Hi friend Thank you for video, can you please tell me what’s the diameter and length of the 3 coils that came out of DNM ?

[@ptriceclop]

did you find the answer ? that's what i'm looking for

[@surronzak8154]

How does rebound work on this fork ? I can't see any oil here

[@gizmo8117]

I have zoom 660s USD invert dual crown, when seated on mtb, the left hand side fork, has slight movement, when wheel comes off ground it makes a clunk sound, I want to disassemble but don't no how to, I think it's the bush either needs replace or tightened ?? Also, there are no air intake valves anywer on the forks, any1 any ideas? ? I think they myt need replacing altogether! ! These are solid good forks tho,; apart from the problem!! Any suggestions please guys??

[@newsky_laboratory]

Спасибо!

[@Shiva_Racing]

Видео " как смазать пружину в ДНМ 8. Действительно, китайцы очень странные люди, другая планета.....Весь мир интересуется, сколько масла в демфере, какой вязкости, а тут об этом ни слова.

[@surronzak8154]

Why does it need to be "serviced" as it has no oil, what did you change appart from he grease ?

[@Vectorebike]

We change oil seals, mudscrapers, oil...

[@electricexploring9518]

What type of grease did you use on those springs ?

[@laurenthelfer9148]

Hi, is this normal my fork travel is only half way Of the tubes?the suspension is extremely harsh on small bumps! I see that's the exact symptoms of a suspension needing a burp...I understand only rebound is an air system, should a burp on this side could still help? Why I can't fit a zip tie to make it burp like a regular air fork?

[@Vectorebike]

Where did you bought your fork?

[@laurenthelfer9148]

@@Vectorebike the fork was in the bike I bought! I don't now from where it comes!

[@mrzux9475]

Hello what oil can use for the fork ?

[@cristopheralminana7534]

any tips what hub or wheel set is compatible for DNM USD-8?

[@Vectorebike]

we sell front wheels, visit www.vectorebike.com

[@maricelalarenas9773]

Why all that grease? when the grease turn solid or dry, may feel the forks a little bit hard?

[@maxschubert3940]

Wait, what? All that is effectively done is Removing a ton of grease from the springs and then putting the same insane amount back on them. Everything else is assembled dry or just with grease? No lubrication oil? The other leg is just supposed to be held under water for 1h and you have to check if air bubbles?

[@maricelalarenas9773]

What a strange thing? Didn´t they use oil?

[@4nlimited3dition_4n3d]

A grease damping design.

[@surronzak8154]

@@4nlimited3dition_4n3d That's a thing ?

[@4nlimited3dition_4n3d]

​@@surronzak8154 In cheaper forks, sure. It does work. Just not as smoothly as an oil dampened one.

[@surronzak8154]

@@4nlimited3dition_4n3d And can I swap the grease for proper fork oil or wouldn't it work ?

[@washingtongularte7085]

@Vectorebike Friend where do I find these stickers to buy ?? have in aliexpress ??

[@fatguyonalittlebike3336]

Hello, do you know the diameter of the springs in these?

[@DeffJam100]

What’s the stock coil rate and total coil length?

[@mitchel0n]

Porfavor alguien que hable español, me dice donde encuentro todas esas herramientas para hacerle mantencion a esta horquilla??, o que herramientas nesecito, gracias.

[@kracksmith4ejm1]

after servicing, when pushing down, as it comes back up i hear metal to metal on mine, what am i missing when this happens?

[@joepje0318]

hi i dont own this fork but its probably due to the coil rubbing on the inner side of the stancion, an easy fix would be to add lots of grease like they did in the video. that is what i did to a simalair fork and it worked like night and day, hope this helps!! gl

[@SimplePleasuresMTB]

Can you do a rebuild video on the USD 6 fork please 😎

[@kevinstreet2966]

No

[@JoshStreetDesign]

So, this fork sticks at the top on mine right out of the box. LIke I have to pull up a bit for it to go all the way out to full extension. So I'm losing like an inch and a half of travel. Is this happening to anyone else?

[@Vectorebike]

Check the pressure

[@JoshStreetDesign]

@@Vectorebike I put air in it a few weeks ago and I don't think it made that much difference but I'll check it again tomorrow. What's the maximum amount of pressure these things can handle?

[@Abstract180]

I have these, they are pure garbage

[@JoshStreetDesign]

@@Abstract180 they're better since I added pressure and made rebound adjustments

[@JoshStreetDesign]

@@Abstract180 that could be a bad thing though, there is such a thing as too stiff

[@LEOSLIM84]

That's a lot of grease!

[@Abstract180]

That’s all that is in these things stock, no oil at all. I finally added 1 oz. of gear oil just to lube up the sticking fork seals. Way better now. But these are heavy and low quality forks, but definitely open up the fork caps at the top and add a small bit of gear oil. I used what I had laying around, 10w40 motul synthetic. Good luck!

[@bigkick86]

Umm..where's the fork oil??

[@aaronsanchezz]

How can i make these stiffer?

[@Vectorebike]

Add air

[@aaronsanchezz]

@@Vectorebike is it safe to go more than 150psi? Its says not to go over that in manual

[@surronzak8154]

@@aaronsanchezz Than no

[@davidcoupalbergeron2]

3 springs and a ton of grease . strange

[@surronzak8154]

a BIT MORE GREASE AND IT WOULDN4T COMPRESS ANYMORE wtf !!