How To Fit Our VW T5/T6 Seat Covers | Vee Dub Transporters

www.veedubtrans... - How to fit our T5 Seat Covers.
They can be found here: www.veedubtrans...

[@lathedog1]

Just fitted these covers on my T6, very nice they are too :-) the driver's seat back cover , as you sit in the seat, the right hand hole for the head rest wasn't punched, so I had to carefully punch a hole, no great hassle. when fitting the driver's seat base cover, it would have been useful if they had included a large bag of assorted, but strong,expletives with the covers, I almost ran out of them when fitting it ;-) I ended up removing the plastic trims around the seat base which made access and fitting a lot easier :-)

[@LJT1988]

Mission if you have a bulkhead. I used a cavity tie which helped loads! Very good quality.

[@veedubtransporters]

Glad you like our covers dude! 🤙

[@tattooedfagin]

Have the Black & Red Diamond Stitch ones on my Black T6 PV with Bulkhead, look great fitted & so much better than the standard covers.

[@veedubtransporters]

Great to hear that you're pleased with them!

[@MorganFfion]

What about the arm rests you get in the bag? Would have been good to have shown fitting to a drivers seat that has arm rests.

[@0o0o099999]

Thanks, this was very helpful. I have a different brand of covers, and I didnt find any hooks, I'll have to improvise if I don't find any hooks. Also the driver seat has arm rests so i need to cut some slits on the side.

[@Monty-kr7py]

If your'e ordering from Vee Dub , don't be in rush , should be with you soon 😂

[@ПетрВоробьев-т2ф]

Works great I so needed this

[@veedubtransporters]

Great news!

[@jason7864]

Where do the elastic steps on drives back rest attach? They can’t go underneath to each other or they’d be too loose and just hanging?

[@veedubtransporters]

These should attach to the metal clips underneath.

[@blimbimful]

How did you get the back cover plate behind the drivers seat back on? I can see in the video the back plate also has a central ‘pin’, but the fabric is in the way of slotting that back in the hole and the video just skipped past that bit…

[@veedubtransporters]

Hi Tom, the plastic backing plate should still clip back in without using the centre pin.

[@carlsmith5059]

Where did you purchase the covers from ,great vid by the way

[@paulahamilton7290]

What happens if you have the folding front seat bracket does the bracket rub and destroy the cover as it moves back and forth! Does anybody have experience with these covers on the folding double front seat?

[@flower6379]

How do we fit covers to T6 with swivel chairs please.

[@veedubtransporters]

Hi, the process is the same, the swivel seat bases shouldn't change anything as long as you have access underneath the seat.

[@StephenLeworthy-rf6wg]

I cant seem to squeeze the headrests into the headrest covers. The hole doesnt seem big enough to fit into!! Any tips?

[@veedubtransporters]

Please drop our customer services team an email at [e-mail]

[@mikestan4594]

Yeah same issue

[@robertclayton9467]

Do these covers fit transporter shuttle (15 plate) ?

[@infinitydragon4647]

How do you fit the cover to the drivers seat if you have a kitchen unit behind restricting access? Any tips/suggestions very welcome. Thanks

[@veedubtransporters]

Hello, we would suggest taking the seat out and reinstalling it once the seat covers are fitted.

[@infinitydragon4647]

@@veedubtransporters OK thanks 😊 makes sense. I was wishfully hoping for a work around that didn't involve seat removal 🤣 appreciate you answering

[@doubleedge5]

Bollocks. Not that easy. When u got bulk head

[@baransahin1047]

TÜRKİYE ÜRETİLEN EN KALİTELİ ÖZEL DİKİM DERİ KOLTUK KILIFI TÜM DÜNYA KULLANIYOR

[@peterwilliams8820]

No hooks included

[@veedubtransporters]

Please give our customer service team an email on - [e-mail]

[@marcck5597]

That looks like a ball ache. My van has a bulk head also. Scrap it

[@jamesjohnson9710]

Drivers seat cover don’t fit the t6.1 as well as it should. Also if you have a bulkhead it’s a nightmare to fat it all.

[@veedubtransporters]

Hi James, if you're having issues fitting your set of seat covers please get in contact with our Support Team ([e-mail]) and they'll be happy to help!

[@SHAQATTAQ77]

Dla mnie to był dramat, 4 godziny 20minut. Siedzenie kierowcy KOSZMAR !!!! I tak zameczek od strony ręcznego niedopiety. Zagłówki MAJĄ bardzo słabą rzepę wręcz ledwo trzymająca. Poza tym długie gumki aż się plączą. Rozwaliłem zatrzaski pod siedzeniem pasażera nie mogąc ponownie włożyć plastiku