Personally I let my car warm up for already 60 seconds before I start moving, then I'll short shift it (before 3k rpm) until I feel likes it warmed up and I keep my throttle inputs light. Another thing to mention is making sure the transmission, transfer case and differentials are all also warmed up. So for atleast 15 minutes of driving I won't even think about hitting full boost. just my .02¢
@bryanjudefernandez21953 жыл бұрын
same. people tend to forget about the transmission and diff. when your car is in neutral or park, the engine warms up but the trans and diff dont, flooring it could ruin the teeth in the tranny and diff
@BC2ManBeast3 жыл бұрын
I do the same exact thing in mine! Let the start up sequence run and less then 3k changes until the oil temp gets too 90-100 then - Its FUN TIME :D
@pnwracing3 жыл бұрын
You should do a video about most commonly failed parts on n54, and brief description on why they fail. (Injectors,hpfp, water pump, cp failure, belt slip through the motor, power steering pump, etc.)
@VehicleVirals3 жыл бұрын
Great idea!
@dbnpoldermans41203 жыл бұрын
Your car will be faster doing all of these upgrades/mods Except for the charge pipe, but do that just for your minds sake I agree with all of these upgrades/mods
@thatct.m32433 жыл бұрын
Cant stress letting the car warm up properly enough!!! Just because your engine reaches operating temps does not mean your oil is up to temp... the e46 m3 gauge cluster has an oil temp reading i never get above 5k until oil is fully warmed and short shift ~3k while engine is getting up to temp. Another thing for us s54 owners is making the switch to 5w50 oil “half as thick on cold start, where bearing wear is 80% or greater” theres a whole debate on it but im making the switch next oil change
@markburkey63713 жыл бұрын
I know it's crazy, but I was reading the owners manual yesterday and it said to start driving immediately with moderate throttle...why do they suggest that? Because of the long time it takes these engines to warm up? 🤷♂️
@thatct.m32433 жыл бұрын
@@markburkey6371 from my understanding it’s because of the low oil pressure at idle, especially when dealing with cold and less viscous oil there’s increased risk for metal on metal contact. The other reason I know is because when a car sits while getting up to temp, only the engine is heating. Since Metals expand when heated, over time it may cause things to misalign or increase wear. They recommend not waiting too long to start driving so that all the different systems warm up evenly (engine, trans fluid, diff oil, axle grease, etc.)
@devanrogers3133Ай бұрын
Replacing as much cheap BMW Plastic that fluids flow through under the hood is a huge one!!
@royxl9506 Жыл бұрын
Don’t know if this a tip or anything but if ur too lazy to let it warm up get a remote starter don’t know if this a bad take or not but I think it’s kinda something that might help
@joaquinpagan38085 ай бұрын
I ADD A CATCH CAN TO MY 530I BMW 2020.. THANK YOU.. AND I FOUND OIL IN SIDE MY CHARGE PIPE.. .. BIG HELP..
@m2comp3693 жыл бұрын
Most of what you suggested makes perfect sense, but was surprised by your downpipe suggestion! Firstly, it’s a serious breach of emissions where I live and getting busted would certainly hurt the hip pocket. Sounds like something VW would recommend given their track record on this topic. I have also come across some people that have gone down this path and complained about smell getting into the cabin and error codes coming up. I guess the tune would sort out the latter.
@djesbaa Жыл бұрын
Where do you live?
@m2comp369 Жыл бұрын
@@djesbaa In Melbourne, Australia. The “Nanny State “as it is sometimes referred to.
@aa7h9113 жыл бұрын
N52 = Reliable :)
@bobross66773 жыл бұрын
Since im destined to have lots of broken cars to fix i might as well keep this in mind
@MPSlotCar3 жыл бұрын
shell for the win! Great video bro
@VehicleVirals3 жыл бұрын
Appreciate you watching! 👊🏼
@vonaroz43543 жыл бұрын
Always on the spot nice video watching from California
@MT-THNDR2073 жыл бұрын
What do you think is superior, Chevron or Shell? I only fuel up at these 2.
@damianrios21643 жыл бұрын
Best content man... gotta say your videos helped alott and very precise 👌💯
@VehicleVirals3 жыл бұрын
👊🏼
@moedawg10323 жыл бұрын
Dude when are we going M5 car shopping again 😁
@stavrosgreen414311 ай бұрын
I fill up my 135i with only 100 octane what a diff , runs like new
@jnx66503 жыл бұрын
Got a sticker from the site 🔥 good luck to everyone ❤️
@risengaming40444 ай бұрын
By the book drive once it goes under 1k rpm.
@unittingfoil77783 жыл бұрын
I hope I win the 335i it would be in good responsible hands! 🙂
@burntavocado50333 жыл бұрын
#6 use chevron techron twice a year
@peterdushaj52623 жыл бұрын
Just a reminder if you’re in the comment section to like the video! It does allot for our favorite content producers. God bless!
@VehicleVirals3 жыл бұрын
You're the real MVP 👊🏼
@holasoyalejandro98223 жыл бұрын
would these work for the b48 engine
@qx4n9e1xp3 жыл бұрын
The B58 is a new engine. I would say yes with the catch can, quality fuel, properly warming up & the catless downpipe stuff. It's similar to n54/n55 in that it's still a turbocharged inline 6 made by BMW, so treat it the same, but the chargepipe problem is specific to n54. Look up a B58 reliability video to find the B58's specific problems.
@holasoyalejandro98223 жыл бұрын
qxANGELxp talking about the 4 cylinder engine in the f30 3 series/4 series and f22 2 series
@qx4n9e1xp3 жыл бұрын
@@holasoyalejandro9822 whoops, i thought you typed b58
@usernamealreadytaken7703 жыл бұрын
Didn’t know catless downpipe would make car more reliable. If I didn’t live in California, I would totally change my downpipe out.
@asmith06093 жыл бұрын
This video is really an advertisement for Shell
@DannyGrc3 жыл бұрын
🔥💪🏼
@ANTHONYNI333 жыл бұрын
I had to sell my f30 i kept getting car anxiety always thinking something would go wrong or just knowing the n55 is not that reliable went back to honda lol
@tonka10r993 жыл бұрын
You made the wrong choice, N55's are actually more reliable from the factory than say a N54
@ANTHONYNI333 жыл бұрын
@@tonka10r99 yes they are but they still have issues i can name a whole list of things i also followed a n55 page on facebook and they are always running in to issues 1 valve cover gasket leak, oil filter housing gasket, electric water pump will go bad, oil pan gasket as well, they will also suffer from misfire, coolant lines that run to the expansion tank are known for exploding, they also need to be walnut blasted because they get bad carbon build up on the valves . The list goes on for the problems im good i made the best choice in my opinión i dont like headaches and my supercharged si maked 364 whp zero issues stock engine and i raced the world in that car its crazy how you can push more than a 335i in a civic and be way more reliable then one too . Now the b58 is a motor i heard was a major improvement in power and reliability
@tonka10r993 жыл бұрын
@@ANTHONYNI33 Well, cant really argue with that. I'm an automotive tech so replacing gaskets and water pumps etc. is just normal to me, for any car really. But i get it, not everyone is mechanically inclined. Also there are a ton of service videos on YT regarding N54's and N55's, some of the stuff you read on certain pages is just blown out of proportions. I feel you with the Honda engine, that's why i also keep an eye on the Coyote Mustangs, those engines are pretty much bulletproof in terms of power and reliability too.
@ANTHONYNI333 жыл бұрын
@@tonka10r99 yes American company’s makes good v8 engines i might look into an a camaro ss or a 5.0 cayote. But i work on my own cars bro but im not gonna consistently be replacing on my beamer especially now that i have less time to my self thats why i rather just deal with the fwd lol and no water pumps are not a common thing to replace at all on honda especially a k series its rare if they go bad and oil pan gasket those things almost never leak its silicone based on hondas i replaced the water pump on my 18 year old accord in may and it was still working properly it was just leaking so i just replaced the whole thing lol
@billsawyer52653 жыл бұрын
simple... I buy new and get rid of it before warranty is up :)
@500hamzah3 жыл бұрын
Third
@KelsS1k3 жыл бұрын
Had My E92 from 72,000 miles to 150k Only expensive thing i repaired was Waterpump It was super reliable
@johnnytacosauce Жыл бұрын
N55's are super reliable i havent done anything to mine except gaskets
@mikailmikail8788 Жыл бұрын
N54?
@johnnytacosauce Жыл бұрын
N55
@mikailmikail8788 Жыл бұрын
@@johnnytacosauce i was asking the other guy bro my bad😂
@bryanjudefernandez21953 жыл бұрын
number one rule: service regularly on time
@KelsS1k3 жыл бұрын
Lies
@bryanjudefernandez21953 жыл бұрын
@@KelsS1k please tell me why that's a lie ?
@bryanjudefernandez21953 жыл бұрын
@@KelsS1k a skillful mechanic can tell when something is going to fail and also give u tips on preventetive maintainance so you face any major issues
@fatiha.25453 жыл бұрын
Service earlier :) e.g. E92 or e60 M cars often fail because of their OEM oil and the gaps in between the services
@bryanjudefernandez21953 жыл бұрын
@@fatiha.2545 true true. Yes it cost more but it's worth it because having your engine ruined and time wasted is not worth the trouble
@br4d1013 жыл бұрын
5 ways to make your bmw reliable 1, sell it n buy something japanese 2, if u insist on buying a bmw get extended warranty 3, service earlier than bmw recommend 4, use genuine bmw parts n not OE quality parts 5, get another job to pay for the parts for your N54 335i Jokes aside they can be very reliable especially the diesels, 335i start going wrong when u start modding! Mine was fine till I started fiddling with it 😉
@korbyn493 жыл бұрын
Make it more reliable by replacing everything that makes it unreliable. Nice
@xpdy10593 жыл бұрын
Shell is always the answer ⛽️
@heatchamps20113 жыл бұрын
Nope chevron
@randyl6993 жыл бұрын
What is optimal temperature for the car before you start flooring? Oil temps above 180 or even higher?
@xannibar284911 ай бұрын
I usually wait until at least 230*F to even go above 3k rpms
@xannibar284911 ай бұрын
I have an n55 so the ideal stock temps is 230-250
@NTG23963 жыл бұрын
Am shocked by the downpipe comment I would have figured having downpipes would create more boost and in turn cause the famous waste gate rattle to occur
@dude45483 жыл бұрын
I'm personally not sold on the downpipe argument just due to pressure balances the stock downpipes are 1-2psi backpressure which is very little but based on the design I believe it helps the seals last longer by exerting less pressure on them
@joshuashepker98133 жыл бұрын
Can you help asap to try to win this idk where too go my eyes really water and something in me wants to jump out of my chest 😬and if you have facebook you can add me my profilename is in joshua shepker
@ziBloodLite3 жыл бұрын
Warm it up to 180 till you hit boost. It you’re running catless it’s easier to hear when you start using your turbos 🧠
@andreroberts14593 жыл бұрын
Thank you for creating this video... Don't have shell nitro in canada
@akiadro3 жыл бұрын
hi from luxemburg
@ninjastriker01373 жыл бұрын
nice vid bro
@lyfzgoodgarage8263 жыл бұрын
Man I only use shell v power period and dude I hope I win so bad not only would it be litt to meet you and hoon around gosh what a sick car as well
@lyfzgoodgarage8263 жыл бұрын
I’ve bein watching your channel for about a year now and have watched this car blossom and would love to baby it just like my e90 details every Monday and at least a slide a day so she can eat some beans drive your cars right and make sure there maintained
@shanebroom91733 жыл бұрын
Lmao ive done everything youve shown in this video except an oil catch can and its taken its tole on the car im about to clean the intake valves and probably switch my cheap ebay aluminum chargepipe to the vrsf one due to fitment issues i ignored and considering my current chargepipe doesnt have a methanol injection bung for the injector and i want to run meth here soon so i am going to use your link and buy the chargepipe since youve helped me alot thru my build due to your videos being done and up while i was doing all my bolt ons thank you for these videos. But listen guys everything this man just said is true very very recommended for everyone to do these things to their cars
@jakubroszka1021 Жыл бұрын
Thank u champ, i will be looking for e90 330i so i will doesn't have a turbo but i am also looking to make that car more realible right...
@nomsi42632 жыл бұрын
Here I'm thinking with the new BMW M3 touring. And bmw being BMW, replace as much plastic as possible 🤪
@pradasupremegucci6243 жыл бұрын
I only give my Mercedes the delicious 91 octane from Chevron. She will drink only the best fuel
@ACURACALABAR113 жыл бұрын
Shell only goes to 91 octane here in Canada. Esso has 93 and petro Canada has 94. So thats why i dont use shell
@damianszewczyk48342 жыл бұрын
i never put my car on full throttle until it hits 90degrees c
@micraw7143 жыл бұрын
I put a new valve cover gasket on mine and did some logs and no more timing corrections, yay!
@uzziahscarwashdetailingoil94903 жыл бұрын
What about N20 engine for bmw
@linogutierrez85163 жыл бұрын
Does this still counts for a 2007 328i?
@Vash16xli3 жыл бұрын
Great tips here.
@linkjoker96263 жыл бұрын
good tips bro
@bobafittness13463 жыл бұрын
Thanks for this!
@tonyarellano74613 жыл бұрын
Great video !!!!
@brandonneal49573 жыл бұрын
If you have a catless downpipe will you pass emissions?????
@RaidedDO3 жыл бұрын
No
@gordythecreator3 жыл бұрын
Ayo! Christian! Shell is the best gas, and I'm glad you could clarify that for me
@VehicleVirals3 жыл бұрын
👊🏼
@jakegoldberg89413 жыл бұрын
bmws are reliable unmodded lol, every car is unreliable when modded out
@VehicleVirals3 жыл бұрын
You got a point!
@jakegoldberg89413 жыл бұрын
@@VehicleVirals then theres the n54...
@JWest13 жыл бұрын
Absolutely no disrespect but... if BMW is this unreliable why buy one? I've never owned one and this and other videos make me want to stay far away from them. Very good looking cars but it has to be reliable without dumping a bunch of money into a car that already isn't cheap
@gfkBill3 жыл бұрын
In the case of the 335i, you'll struggle to find such a moddable car, with that much power, that's that nice to drive, for anything close to the price. I'd argue they *are* cheap for what you're getting.
@chevyboa89503 жыл бұрын
Fatal attraction
@gregreno55663 жыл бұрын
I would like a link to buy some stuff for the car giveaway.
@VehicleVirals3 жыл бұрын
vehiclevirals.com/
@latesiaadams96223 жыл бұрын
I have a n55 (f10) but im pretty sure most of this applies to me
@VehicleVirals3 жыл бұрын
Absolutely!
@christianvega2443 жыл бұрын
LOL my car made the thumbnail
@VehicleVirals3 жыл бұрын
👀👀
@Haz66673 жыл бұрын
Do you know a place to buy the exhaust setup from
@VehicleVirals3 жыл бұрын
bit.ly/301UPVq Use this link, it'll help support my channel.
@Haz66673 жыл бұрын
@@VehicleVirals Thankyou only just seen this, appreciate it!
@anthony112563 жыл бұрын
Will a walnut blast make your car run better?
@tonka10r993 жыл бұрын
Yes, but you dont necessarily need to do a "walnut blast", head over to Vehicular DIY and check how to clean the intake valves without doing a walnut blast, after cleaning your valves i highly recommend you immediately install an oil catch can so carbon deposits dont build up on the valves again.
@gfkBill3 жыл бұрын
@@tonka10r99 I did this - be prepared to spend a lot of time and a lot of lower back pain, for a middling result. If you've got a lot more time than money, it'll work. Maybe mine was too far gone to do "manually", I wish I'd just done the walnut blast.
@farmanshaikh64053 жыл бұрын
@@gfkBill yeah, i had the same experience following VDIY's method....barely anything came off. Also wish i'd just done a walnut blast.
@steveb95253 жыл бұрын
Do I need to swap out the intercooler before a tune?
@VehicleVirals3 жыл бұрын
Not for a conservative tune. On MHD they only recommend FMIC on stage 2+
@steveb95253 жыл бұрын
@@VehicleVirals What about the downpipe? I did the turbo charge pipe and Burger air intake filter
@gfkBill3 жыл бұрын
@@steveb9525 If you're going to do lots of WOT runs or track it etc and suffer heat soak, do the FMIC. But like the FMIC, you don't need to do the downpipes unless you want to really trick it out to stage 2 MHD. If you just want to show off occasionally, you don't need either :)
@riseupstudios123 жыл бұрын
How often do you need to do a walnut blast because I’ve heard it can be expensive?
@VehicleVirals3 жыл бұрын
Every 40K miles. $300-$500
@riseupstudios123 жыл бұрын
@@VehicleVirals so I guess if I didn’t drive it very much say only to car shows or on the weekend maybe every couple years it would need to be done thanks for the info. I do like the sound of the N54 and would like a 335i but just trying to get an idea how often things would need to be done and how much things would cost because it definitely wouldn’t stay stock
@gasgod74043 жыл бұрын
@@riseupstudios12 if you think a walnut blast is expensive…. You are not ready to own one of these machines
@riseupstudios123 жыл бұрын
@@gasgod7404 probably right that’s mostly likely why I haven’t bought one because I’m not financially in a spot to afford the maintenance on one but some day maybe just have to keep working toward the goal
@gasgod74043 жыл бұрын
@@riseupstudios12 keep saving brother and when you know you can maintain it and find one for a good deal pull the trigger and I guarantee you it will bring you joy beyond belief. I was not trying to bash you or be hurtful but the cars are not cheap to maintain i just had to spend $6000+ on maintenance on mine
@AriS-qq9fk3 жыл бұрын
for some reason im always here before 50 views on every one of your upload
@VehicleVirals3 жыл бұрын
Consistency!
@diegoachon88393 жыл бұрын
Let me cop that brimmer sir 😭
@kingfreeze7233 жыл бұрын
Also make sure the frame has rust protection
@saratc6603 жыл бұрын
Paradox of the story: If you’re going to drive irresponsibly, remember to drive responsibly
@maxwellnurse64663 жыл бұрын
Second
@LIONHEARTEIGHTYFIVE3 жыл бұрын
First
@klaspeppar56193 жыл бұрын
The feeling of watching this as a mechanic (still a rookie), with a Volvo P24 S60 2.4T (B5244T3) with a M56 and a P12 V50 1.6D (D4164T) with a MTX75 both barely broken in with only around 280 000Km to 290 000Km. One is 20 years old and the other is 10. You know a Volvo will run forever if maintained properly, i guess it is the same with BMWs. Also OKQ8 and Shell and Circle K 95 octane (European rating what ever it called) has been good enough for my families Volvos (except the V50 of corse).
@tonka10r993 жыл бұрын
Doesn't Circle K use RON instead of Octane? RON and Octane is not the same, 95 RON is like 91 octane, which is pretty crap tbh.
@klaspeppar56193 жыл бұрын
Legendary RON is a way to rate octane and yes 95 RON is 91 PON, which is “good enough” for stock Volvos, but I will switch to 98 RON (93 PON) when i tune the P24.
@gfkBill3 жыл бұрын
Leaving aside comparing boring slow-ass Volvo sedans to a sports car, first result I got for Googling the V50 was "The V50 has been recalled numerous times, most noticeably for potential leaks in the fuel pipes and power steering pipes, faulty handbrakes and faulty cooling fans."
@klaspeppar56193 жыл бұрын
@@gfkBill good thing then that I'm almost a Volvo Mechanic (spent 2 year working as a Volvo Mechanic trainee). The S60 isn't the fastest (200Hk/285Nm from factory), but i enjoy it (sorry if your 12 year old mind isn't able to comprehend the idea that some own car for their own amusement instead of trying to please others), there is nothing like a 5 cylinder. The V50 is a surprisingly pleasant daily driver, extremely fuel efficient (i have average 56MPG US or 4.2 liters per 100Km).
@gfkBill3 жыл бұрын
@@klaspeppar5619 Ha ha, easy tiger. This 12 year old is 52 :D Sorry if I came off too harshly. No need to tell N54 owners about owning cars for their own pleasure, it's the only reason we drive a BMW. I agree with the Mechanic sentiment though, I'd not own one if I couldn't do my own work on it either. And dead jealous of that fuel economy - main reason I'm getting rid of my 335i :'( Merry Christmas, enjoy your daily driver! I do like some of the recent Volvos.