Veneer Stone Accent Wall Interior | DIY

[@arie1787]

Amazing! Just the DIY help I needed! Ty!

[@GlobMarble]

Glad it helped!

[@dkpelkey7148]

My Faux Stone Guy....... AAA+++ Great video!

[@GlobMarble]

Appreciate it!!

[@camillarodrigues7668]

It’s even better in person! You did a perfect job ❤

[@GlobMarble]

Thanks! :)

[@jaymes40]

Amazing job ! You explain the process so well. Thank you for great info.

[@GlobMarble]

Glad it was helpful!

[@esthermcgough3995]

I wish I had your energy. This turned out great.

[@GlobMarble]

Thanks, glad you liked it!!

[@camillarodrigues7668]

You did a great job!! Congrats 😊

[@GlobMarble]

Thank you!! 😊

[@kjcslim]

That is really impressive from start to finish. Great looking wall. What did you use to finish off the edge around the window?

[@GlobMarble]

Thanks!! It was a piece of aluminum solid angle

[@user-lw5gw5xh2q]

great work

[@GlobMarble]

Thanks!

[@tuckervio3189]

That looks amazing, great job buddy. Where could i buy the same type of moulds??

[@GlobMarble]

All tools and materials are linked in the videos description!

[@antoshkastarbuilds1759]

Awesome work 👍

[@GlobMarble]

Thanks man!

[@malcolmwilson1175]

I will have to give this a try. Nice job.

[@GlobMarble]

Glad it was helpful!

[@tattootempest]

You should get a backpack sprayer. They have a pump handle on one side so you could keep pumping and spraying and moving non-stop. Edit: If you do get a backpack sprayer though, make sure to remove the in tank and in line filters ;)

[@GlobMarble]

Thanks for the tip!

[@denisconor648]

Great stuff

[@GlobMarble]

Thanks!!

[@user-tm2yu1ez8t]

That was great.

[@GlobMarble]

Thanks!!

[@ElijahNgugi-go1ms]

i like your details explanation and the outcome is great. How much would charge such kind of a project?

[@simonfleming4374]

great vid but why is no one calling out that flipping the panel caused a gap in the join for the panel under the window. panel should not have been flipped. flipping it just meant you cut the bottom not the top as required. you just needed to rotate it around back to front not upside down. 😁

[@raysepulveda7620]

Very nice.

[@GlobMarble]

Glad you liked it!!

[@rociocarrionrabanal1121]

Amazing

[@GlobMarble]

Glad it was helpful!!

[@ferencbekesi6197]

Very nice job! Why do not use gypsum for interior stones? That would be much lighter. Have you tried to lighting the concrete stones?

[@GlobMarble]

Gypsum is a common option for interior stones, but they are very brittle and hard to color. I would never achieve this look with plaster or hydrocal

[@Csett1]

Looks great

[@GlobMarble]

Thanks!

[@namsoemmanson8338]

Beautiful

[@GlobMarble]

Thank you!

[@hadeelhady8857]

u r amazing

[@GlobMarble]

Thank you!

[@algazyadilkerim]

👍👍👍✊🔥

[@GlobMarble]

Thanks!!

[@JM-ry3iq]

Could you make a video of using polyurethane in your molds. Ive seen those polyurethane panels that are light weight foam but no one has a video of making them .

[@GlobMarble]

Could you send me a link to one of those videos? Not sure what you are referring to

[@GoofsGuides]

Nice!

[@GlobMarble]

Thanks!

[@anthonycarrero-gn2yt]

🔥🔥🔥

[@GlobMarble]

Thanks!!

[@OPEN-qg2ui]

Hai, huge fan of you. What kind of adhesive did you use for installing the mould.

[@GlobMarble]

Thanks! I used the loctite premium construction adhesive.

[@earld1403]

Commenting to feed the YT algorithm

[@GlobMarble]

Thanks!!

[@Postevka]

Hey, thanks for the videos. I live in Pennsylvania, and cant seem to find CSA cement, where do you get it from? can i buy it in bulk?

[@GlobMarble]

You can buy CSA from us, we are in Brooklyn NY and we ship worldwide :) Links to all tools and materials are in the description of the video

[@Postevka]

@@GlobMarble so the CSA is more of an additive that I add to my Portland Cement & Sand mix ? Got it ..

[@GlobMarble]

You can use it as an additive but in this video I used it as a standalone replacement for Portland cement

[@ronaldchinomona7041]

Awesome work! Does the strength of the cement affect the mixing ratios of the ingredients?

[@GlobMarble]

Could you elaborate? What type of cement are you thinking of using?

[@ronaldchinomona7041]

@@GlobMarble suppose I am using Portland cement. Does it really matter if I use 52.5N, 42.5N or 32.5N? Do these different cement strengths affect the recipe?

[@GlobMarble]

You can do anywhere from 1-4 parts sand to 1 part cement if using Portland type 2. I would recommend a sweet spot of a 3:1 ratio. More cement = more strength but also more shrinkage.

[@ronaldchinomona7041]

@@GlobMarble cheers mate !

[@GlobMarble]

Any time!

[@Luckingsworth]

Support comment!

[@GlobMarble]

Thanks!!

[@Mr_Spoonman]

Amazing video! Can I ask, what would you charge for a job like this?

[@Sejo-writer]

In Tanzania 🇹🇿 its very difficult to get that material pls another method to creat stones pls

[@GlobMarble]

We ship our molds worldwide, you can use regular concrete or gypsum if you want

[@Sejo-writer]

Thanks for good interaction ,sorry sir I want to know cost of molds ,or how mch?

[@JosephShanabarger-kn8yg]

Good job but how did you make the mold thank you

[@GlobMarble]

We sell the molds, all tools and materials used are in the description of the video

[@oseniwasiu4582]

It so beautiful how can I get the mud

[@GlobMarble]

All tools and materials are linked in the description :)

[@darongoode948]

I need rocks with different colors.

[@GlobMarble]

Check out some of our videos on how to color stines like this one- kzbin.info/www/bejne/movShatso7Vlh6s

[@ferencbekesi6197]

Have you tried to lighting the stones with "clay balls"?

[@GlobMarble]

Could you elaborate?

[@ferencbekesi6197]

​@@GlobMarble I would use "perlite" so the concrete stone will be much lighter. So you don't need to spend much more money and time to upgrade the plasterboard.

[@gemmatagle2119]

CSA?

[@aaronstout1323]

Would diluting csa with regular S type cement extent the life of the mold but slow the cure? Are your molds polyurethane bases?

[@GlobMarble]

Yes, the molds are polyurethane and generally last much longer than silicon molds. And yes, CSA is designed as an additive, not as a standalone product like the way I used it. The description has links to all the products, and the product page for CSA contains all the dosage rates and corresponding cure times.

[@ouadahsidali1129]

What type of cement did you use?

[@GlobMarble]

CSA. Links to all materials and tools are in the description of the video :)

[@user-xg2sz5gf9r]

Hi

[@dblanchard3635]

'Promo sm' 🤤

[@4tradesmenfencing]

Instead of a disclaimer just edit this video. If it ruins the molds you should take out that portion of the video mi amigo.

[@GlobMarble]

Thats where you are wrong. This video shows newbies a way into this industry without investing in 50 molds to start manufacturing. The benefits greatly outweigh the cost

[@4tradesmenfencing]

@@GlobMarble no I disagree if they get a couple minutes into your video all they will see is you telling them to use a certain type of concrete that concrete will ruin their molds.

[@GlobMarble]

A concrete that will shrink the demold time from 12 hours to 30 minutes. If you would rather buy 50 molds from us to manufacture traditionally, we will not complain :)

[@handsome526]

Turn off power before working around exposed wire