Ventilation: Purge Time Calculation

  Рет қаралды 4,659

Safety Pro Calculations

Safety Pro Calculations

Күн бұрын

Пікірлер: 12
@apoorvchoudhary774
@apoorvchoudhary774 5 ай бұрын
Thanks for this wonderful information. May I know in which code or standard we could find the reference of this formula please
@gonzlycurgus
@gonzlycurgus 7 ай бұрын
How you get -2.996?
@muhammadwaheedabbasi4926
@muhammadwaheedabbasi4926 2 жыл бұрын
The ventilation rate inside the confined space including the ventilation rate in the breathing zone shall be plz answer
@tonydelpilar
@tonydelpilar 6 ай бұрын
hello, I've been searching the web everywhere for a simple question regarding forced ventilation times of confined spaces but I can't find anything, not even on the Osha website. All osha said was that they recommend 20 air exchanges per hour or 3 air exchanges per minute. Any input would be appreciated! It's for school, and the question is as follows: How long should confined a space be force ventilated if its found to be a hazardous atmosphere? A) 5 mins B) 10 mins C) 15 mins D) 20 mins
@SafetyProCalculations
@SafetyProCalculations 6 ай бұрын
Sorry for late reply. I don't like this question. There is really not a set time for ventilating a contaminated space. You test the atmosphere before entry. If contaminants are present you ventilate. After ventilation begins you conduct periodic testing--throughout the duration of the work operation. You ventilate until the contaminant concentration is reduced to a safe level. If the source of the contamination is in the confined space, ventilation would continue throughout the work operation.
@SafetyProCalculations
@SafetyProCalculations 6 ай бұрын
There is one "rule of thumb," I don't think it is a regulation, that suggests ventilating the space for 10 minutes before initial atmospheric testing. If space is contaminated. ventilate for 10 minutes, then test the atmosphere. But there are so many more variables to consider than just time.--volume of the space, volume of ventilation air etc. Maybe this is what the instructor is asking about?
@jvvee856
@jvvee856 Жыл бұрын
Hi I love your video. thanks for this
@NoorMohammed100
@NoorMohammed100 Жыл бұрын
What is the Natural Logarithm value?
@SafetyProCalculations
@SafetyProCalculations Жыл бұрын
The natural logarithm lnx is the logarithm having base e, where e=2.718281828....
@gonzlycurgus
@gonzlycurgus 7 ай бұрын
Okay thank you i Already Understand, so we must converted 0.05 to Ln formula, so will get a -2.996
@balakrishnan7081
@balakrishnan7081 Жыл бұрын
Hi
@SafetyProCalculations
@SafetyProCalculations Жыл бұрын
Hello
Ventilation:  Calculating Required Dilution Air
4:09
Safety Pro Calculations
Рет қаралды 3,3 М.
Hardy's Integral
13:47
Michael Penn
Рет қаралды 16 М.
My scorpion was taken away from me 😢
00:55
TyphoonFast 5
Рет қаралды 2,7 МЛН
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
B1B1 PGRA ILLUSTRATOR PARTIE 04
5:36
Thierry Dambermont : e-Learning and Graphic Design
Рет қаралды 13
U6V4 Worker Noise Exposure Calculations SAFM 3423
15:10
Safety Pro Calculations
Рет қаралды 1,8 М.
STEL and TWA Calculation methods on gas monitors
3:24
Safety Monitors
Рет қаралды 3,7 М.
ACGIH Lifting TLV Tables
23:54
Safety Pro Calculations
Рет қаралды 887
Mode Factor Calculations for Slings Load (Uniform Load Method)
19:35
Construction Cogs Cranelife
Рет қаралды 10 М.
why the best chips are at michelin restaurants
8:44
acooknamedMatt
Рет қаралды 534
7/10 - Gas Monitors - Time Weighted Average (TWA)
4:06
Eurosafe UK
Рет қаралды 302