Venturi Meter Problems, Bernolli's Principle, Equation of Continuity - Fluid Dynamics

This physics video tutorial provides a basic introduction into the venturi meter and how it works. It's a device used to measure the velocity of a fluid in a tube. It works by changing the cross - sectional area of the pipe to cause an increase in fluid speed which leads to a reduction of pressure which can be visually measured due to the height difference in the two columns. This video explains how to derive the formula that can be used to calculate the fluid's velocity on the left side of the meter using bernoulli's equation. The flow speed in the throat can be calculated using the equation of continuity and the difference in water pressure can be calculated using the gauge pressure formula for fluids or using bernoulli's principle. This fluid mechanics video contains all the formulas and equations you need when dealing with physics problems involving the venturi effect.
Mercury Barometer Problems:
• Mercury Barometer Prob...
Open Tube Manometer:
• Open Tube Manometer, B...
U Tube Manometers:
• U Tube Manometers - Pr...
Archimedes Principle & Buoyant Force:
• Archimedes Principle, ...
Buoyant Force of Helium Balloon:
• How To Calculate The B...
Physics - Intro to Buoyancy:
• Physics - Intro to Buo...
_______________________________
Apparent Weight and Apparent Mass:
• Apparent Weight Physic...
Fractional Volume of Submerged Object:
• How To Calculate The F...
Hydrometer Physics Problems:
• Hydrometer Physics Pro...
Volume Flow Rate and Mass Flow Rate:
• Volume Flow Rate & Mas...
Equation of Continuity:
• Continuity Equation, V...
Bernoulli's Equation:
• Bernoulli's Equation E...
________________________________
Torricelli's Theorem & Speed of Efflux:
• Torricelli's Theorem &...
Dynamic Lift Force:
• Dynamic Lift Force on ...
Viscosity of Fluids and Velocity Gradient:
• Viscosity of Fluids & ...
Full-Length Videos and Worksheets:
/ collections
Physics PDF Worksheets:
www.video-tutor.net/physics-b...

[@TheOrganicChemistryTutor]

Next Video: kzbin.info/www/bejne/fqTKi4Boib2Lr5Y Final Exams and Video Playlists: www.video-tutor.net/

[@LinaOukil-wu5br]

THANK YOU SO MUCH FOR THESE VIDEOS ,UR A LIFE SAVER

[@Chivende]

Your voice is magical 😅😅😅😅...i wish all lectures were this calm..and the content is amazing, everyone gather here😊😊😊

[@Shackled]

For anyone having issues with this one, do this. Just watch it through once and write down everything a long with him. Then just attempt to derive that first equation by yourself without looking and only refer back to your notes if totally stuck. Then watch it again and talk along as if you are discussing it with him and look at your notes. Lastly, take a short break and then come back and watch it at double speed and comment along with it. You will be amazed at how much you have learned in the short time. The rest will be cake.

[@LinaOukil-wu5br]

THNKS IM USING A SIMILAR METHOD WITH DIFFRENT SUBJECTS AND IT WORKS AMAZINGLY

[@truth4513]

waoh i really enjoy how you explain things unlike my fluid lecturer he makes me want to run

[@ongka2000]

This helps a lot! Thank you.

[@biakmuantonsing381]

Keep it up..the moment I watch..I do not need a tutor cuz this online explanation is much better..nice.imparting.

[@raphaelaja5480]

great explanation, really helped me !

[@didiruhyadi4798]

Thank you so much. keep make the lesson video, it's very help me axe final exam

[@POLISNecro]

Thank you so much. Will it be possible to see one with head losses calculations please?

[@user-ds4vo9xn4e]

Thank you so much from france i didnt found a video about venturi in french u help me alots thx u

[@gregroth4696]

Love this. Lost me right at the end. I'm applying this to a social formula. Thank you.

[@anaknadiem]

Matur nuwun gih, mas🙏🏻🙏🏻

[@madeline8968]

You. Are my hero. For real.

[@Channel1212ful]

you're a wealth of knowledge

[@shobyanto6635]

Nice presentation

[@amazingdeen6734]

Thanks Sir!!!

[@pcakshaya4292]

thanku so much it was so helpful :)

[@roniemedel6148]

Thank you so much

[@syamilnazri7440]

i almost do a dark spell to my lecturer until i found your video.. thanks so much

[@mohsaj7652]

wtf

[@speedmax0367]

Thanks you so much

[@sparrow1177]

Thanks a lot....got a lot og info. Important for my JEE

[@ninisanjay6638]

Thanks 😊

[@niloofarkh4779]

thank u so much

[@spacespaceradio6514]

Is the velocity V2 the same as the velocity at point c?

[@yasharaltay2766]

how does the increase the venturi effect?

[@SaritaKumari-16]

Hugs from India 💜

[@user-sr4um7ox2e]

what would happen to the pipe if the speed at point B surpasses the max speed(with max speed being the speed that makes H2=0 )

[@JeromeNyamekye]

Nice and a wonderful explanation..... However, I went through the calculations but I did not understand how you calculated the area of the diameters of the pipe and the venturi. Is there any explanation to give to that please

[@brandonduong]

It's given

[@AmirIkhwy]

Question how to find Z1-Z2 ? Explain please

[@steffinatalie]

Thanks

[@anilsharma-ev2my]

Relatives velocity in space formula is like relatives of venturi effects formula 🥂

[@ozgurkacmaz8]

if there is no difference head ( i mean if the 61.2 cm is doesn't there), how to calculate V1 ? if h be equal to zero, what should i do ?

[@zc8778]

Could you tell me, is there a ratio for the most efficient venturi of how much you have flowing in to how much is added via the venturi? So if you have a constant flow rate and constant pressure in say of 10bar air passing through, how much in comparison could be drawn through?

[@zc8778]

Could you induce as much as say 1/2 the constant volume in through the venturi?

[@Freakybananayo]

Good video. I'm confused why the p2 would be less than p1 though. The level of the liquid in the 2nd tube is lower so how come it hasn't got more pressure?

[@ericgibson7889]

The pressure of a venturi meter is always lowest at the throat, where the flow speed is the greatest. The level of the liquid is lower because there is less pressure pushing it up.

[@angelluisgarciaguzman5598]

When you will finally put your mic to max?

[@user-hv6ef9ie1g]

Nice

[@sparshsaxena3519]

This channel is a boon for JEE aspirants in India like me who cannot understand concepts from books.

[@jorgemercent2995]

I am hesitant about calling P1-P2 Delta P, because change is always final minus initial

[@TheSenseiKai]

I guess you could use the absolute value of it ,then to make things simpler for you.

[@StreuB1]

Not always. In this case, it will actually be an indicator of flow direction if that was not already known.

[@sccm100]

Right!

[@Cdawg_6969]

How do you find the height different in the water tubes

[@ninisanjay6638]

It is given

[@tonyn300]

why is change in pressure p1-p2 rather than p2-p1

[@RealEstateWomdersTV]

What about V2?

[@mylobage]

I still don’t understand how you changed the pressure of the whole system, and equated it to pgh.

[@Alireza-fs3ur]

The fluid has a certain pressure at the 2 points, P1=ρgh1 P2=ρgh2 dP=ρg(h1-h2) => dP=ρgdh

[@markalbaytar]

where did that 1000 came from sir? I'm so confused rho=1000?

[@roniemedel6148]

density of fluid in the venturi meter on this case he uses water

[@ninisanjay6638]

Yes

[@thegreatnormad3424]

My lecturer use different formula ! What's going on

[@blameboredom9227]

how on earth did 1/2 minus 1/2 became 1? , I can't hear the video clearly , you said if we factor 1/2 rho v1 squared you have 1? (4:27)

[@lyricslord947]

U didn't change the areas from cm to m when working...check it out

[@Albi91vl]

I thought the video was about a problem (a flaw) in the Venturi metering system. The title of the video was totally misunderstood by me

[@doriswilliams167]

At 8:36, is that supposed to be a "p" or a row = 1000? i am confused.

[@abram3rdking292]

rho

[@markalbaytar]

Im thinking about that too where did that come from

[@JellyScrub]

@@markalbaytar rho is the density of water at 1000kg/m^3

[@sonicdewd]

That's really the only thing that I could pick on (not here to pick on this presentation) but rho should be written as a Greek rho character, not as a 'p' like he did.

[@robsomers3279]

you sound exactly like mark wahlberg

[@jaydipbhattacharya4322]

If you did not cancel the rho*g*h terms and kept h1 and h2 , and eventually h = h2 - h1, it would be much easier to understand

[@sudharanis7616]

Isn't that flow instead of velocity

[@chrisdaniel1339]

I did extremely well in college algebra, but these are some intimidating equations and calculations. Yikes! I have not done any algebra in nearly a decade and a half. If I continue with my next college degree I will be required to take chemistry and I am so out of practice when it comes to solving algebraic equations.

[@hying3838]

hi, can you speak louder, cause my computer speaker has reached 100 and is still very soft.

[@eqisoftcom]

So, where are the "problems"?

[@franciscorussela.8663]

7:29 when uou've calculated the v2 you take the area as 10cm^2 and 5cm^2 then you've come up with 4m/s? EDITED: oh i get it you've just cancel the cm^2 unit😂