Venturimeter Problem Example

[@TutorialsPoint_]

To Get Certification, Click Here: bit.ly/3Pw7VWr Use coupon "KZbin12" to get ‘’FLAT 12%’’ OFF at Checkout.

[@AkkinapallyVamshi]

a venture meter having inlet diameter 100 mm and throat diameter 25mm is fitted in a vertical pipe, throat 0.3m below inlet, for measuring the flow of petrol of specific gravity 0.78 pressure gages are fitted at inlet, and throat. assuming the loss of head between inlet and throat as 30 times the velocity head at inlet, find: a) cd for the meter. b) the discharge in liters per minute when the inlet gauge reads 274.68kn/m² more than the throat gauge How to slove this question

[@rtybgm3564]

A venturimeter of inlet diameter 300 mm and throat diameter 150 mm is inserted in vertical pipe carrying water flowing in the upward direction. A differential mercury manometer connected to the inlet and throat gives a reading of 200 mm. Find the discharge if the coefficient of discharge of meter is 0.98.

[@prohustler9600]

thank you for video chaha it is really helpful to my assignment

[@rtybgm3564]

An oil of sp .Gr. 0.8 is flowing through a venturlmeter having an inlet diameter 20 cmn and throat diameter 10 cm. The oil mercury differential nanometer shows a reading of 25 cm. Examine the discharge of oil through the horizontal venturimeter, Take CD =0.98

[@RelaxUmindy]

A horizontal venturimeter 160mm x 80mm is used to measure the flow of an oil of Sp. Gracity 0.8. Determine the deflection of the oil-mercury gauge, if the discharge of the oil is 50lit/s. Take coefficient of venturimeter as 1. (Ans, 296mm) . . . Solve please

[@kaveeshadilshan4016]

i have problem sir.can u solve that?.i can mail or type hear.

[@nehanetam5185]

Thank you so much sir ...

[@shubhamasdf8317]

Keep this good work going

[@worldwrestlingsports344]

please solve this sir now because tommorow is our paper A horizontal venturimeter 160mm x 80mm is used to measure the flow of an oil of Sp. Gracity 0.8. Determine the deflection of the oil-mercury gauge, if the discharge of the oil is 50lit/s. Take coefficient of venturimeter as 1.

[@godislovenotamassacre9957]

Pls clear me about it sir

[@vishalmoolyanitte6534]

Thank you sir

[@edutechguruengineeringlear4280]

kzbin.info/www/bejne/hmebfJ2IaNamZ68

[@fabrisshark2383]

Thanks

[@venkatreddy6815]

How to sh and s0

[@udaybhaskarkalita7282]

13.6 keise huwa

[@godislovenotamassacre9957]

In some problems CD is shown .98 but why in solving question it takes as 9.81

[@peermohamedrajam1784]

punyo horming Watch carefully

[@Zagamarni]

I thought you're supposed to convert diameter in cm into m

[@worldwrestlingsports344]

great

[@mdirfanalikhan575]

270

[@vrushabhzunjrkar4150]

1m/1000= 1liter