Vermeer BC2100XL Brush Chipper in Australia vic Greene tree services
Пікірлер: 81
@danj628910 жыл бұрын
I can't believe that Bobcat lifted such a big tree. That was a lot of tree to chip.
@Ziggynutter5 жыл бұрын
Hey old mate, keep your hands away from the feed table, bit different with horizontal rollers but the logs still move around and fast.
@SirDeanosity10 жыл бұрын
The little bobcat that could.
@daveycrocket48735 жыл бұрын
That guy standing there acting like he's doing something.
@RightCutTreeService12 жыл бұрын
Impressive chipper! Are the chips being utilized or not? Seems like a waist to just use the chips as a landfill compost. A lot of firewood there.
@emifsudster10 жыл бұрын
Highly impressed, look at the safety equipment and professionalism of the workers. Great work, but have a look at the joke masquerading as tree removers in USA , they must have plenty of idiots happy to risk their lives for a dollar, The Bobcat operator was very efficient ,no waiting just get another log and straight into the machine.
@ThatChipperGuy8 жыл бұрын
Nice little operation
@unlimiteduploads29718 ай бұрын
you could slowed down the feeder speed a bit, seems like ur running it on max.
@Average_Joe875 жыл бұрын
First time seeing a Bobcat working in Australia.
@jamesmcsparron2 жыл бұрын
Are the chippings going to be processed into boards, or are they gonna be dried out to be used as biofuel?
@exmark524811 жыл бұрын
that is bad ass chop chop!
@heatherschulz-behrend796211 жыл бұрын
oh oh oh there goes the big one show the rollers!!!
@graysquirreltreeservice72995 жыл бұрын
Should have got a bandit 😂😂😂😂🤣😁
@godmort5 жыл бұрын
Lol
@richardmercado62855 жыл бұрын
Do you own a bandit? Are they better than a Vermeer
@hevertorres50375 жыл бұрын
@@richardmercado6285 Bandits are Amazing can't go wrong
@markmitchell27944 жыл бұрын
Just seen comparison between bandit & vermeer ,vermeer won , juts barely
@graysquirreltreeservice72993 жыл бұрын
Morbark or bandit 👍👍👍
@85evil410 жыл бұрын
damn that thing ate that pretty quick that seems a little fast to me but im not 100% anyways cool video and thats one beast of a chipper fucking a
@brendongreene63588 жыл бұрын
as long as you're sitting at the top is all good
@florin26balalau5 жыл бұрын
Sounds like the chipper is struggling maybe because of the blades are not sharp enough at work we use a bandit we put new blades on it it sounds like it would would run better
@godmort5 жыл бұрын
The way the Vermeer works is using a smart in feed which controls the ramps at hydraulics to Optimate chipping and quality of chips
@GroovesAndLands4 жыл бұрын
Vermeer machines have an automatic in-feed system. Once the in-feed has a hold of the log, the machine automatically forces the log into the knives in manageable "bites" for the knives. The result is: feed, bog, feed, bog, feed, bog until the log is gone. All be design. Vermeer machines work awesome.
@florin26balalau4 жыл бұрын
Yeah that chipper doesn't compare to the Raco the customers are always really scared when we fire it up and feed it large 20 inch logs
@florin26balalau4 жыл бұрын
I understand you guys just turn the key and go but we have to fix this s*** and the blades are really important on a underpowered machine and I just turn off auto feed all together rayco can suck that log and I like to feed the machine my way
@bkb56682 жыл бұрын
Just because you can does not mean you should. That chipper is huge, but that tree should have been bucked up and used for fire 🪵 wood!!!
@bill55522 жыл бұрын
Maybe for an outdoor fire.....you don't want to put pine in a fireplace.
@rubenperugachi11023 жыл бұрын
Buenas noches disculpe endonde puedo conseguir. Y cuanto es el precio? Alguien que me ayude con la pregunta gracias
@theronwinsby11 жыл бұрын
Stupid. But is it lees polution or fuel than a few chainsaws and 2 guys?
@richardmercado62855 жыл бұрын
ProTrees I think I'd rather have this than a few chainsaws and guys lol, how can you even compare?
@hebergarcia55467 жыл бұрын
Buen equipo
@mruk-pq5ol2 жыл бұрын
Nano maszyny na sztućce ja widziałem.Z poważaniem rutka I cała załoga naparu.Tak jak muwiłem zły ato zły W sposób wybitny Kraków łamał dobrem największych mocarzy powtarzam znaczek pod powiekę to za mało.Z poważaniem łza.
@highvalleycowboy12 жыл бұрын
Epic
@andrewcampbell6276 Жыл бұрын
Why not cut them up for firewood , just seems a waste .
@g2macs6 жыл бұрын
Six out of ten mafia bosses prefer the BC2 to get rid of all of life's little problems.
@Tabktopless-z9b3 жыл бұрын
Started looking up 6 inch chippers and ended up here.
@godmort3 жыл бұрын
Lol
@unalan53486 жыл бұрын
The trick is using it past its possibilities if I picked up that log the normal way the bobcat couldn't lift it
@Eysah_11 жыл бұрын
how did i get here....
@rudolphhessian41833 жыл бұрын
wrong path in life
@gabriel1987010 жыл бұрын
What is the average size/dimesions of the chips?
@GroovesAndLands4 жыл бұрын
About 2.5cm x 2.5cm x 1cm thick - until it's chewing up the last bit of log, when the in-feed roller is no longer forcing material into the knives. At that point, the chips get much longer and less uniformly cut.
@browny388810 жыл бұрын
what a waste, saw the bloody thing up for firewood!! that machine is designed to stop at intervals so it doesnt bog down and stall
@nephilly878 жыл бұрын
Pine firewood? Maybe if you like your chimney on fire
@browny38888 жыл бұрын
+nephilly87 what third world shit hole do you live in, here in New Zealand pine is the most common firewood burnt and we don't have chimney fires unless some useless clown is too lazy to clean his chimney.
@vacuumboy6.011 жыл бұрын
Turbo diesel ? i can hear the turbo spool when it bogs down
@GroovesAndLands4 жыл бұрын
I just rented this thing's baby brother, the BC1000XL, which had a 74hp, 2.9L Deutz turbodiesel... It was an absolute beast and ate everything I gave it - a lot faster than I could feed it - to include some 12" logs. I had to buck them into lengths small enough to balance in my tractors loader, but I'd say the machine could eat 1 foot of 12" diameter log every 2 seconds. Very, very impressive. Vermeer is awesome stuff.
@jamesdurstine88925 жыл бұрын
No muffs 4 the operator?
@GroovesAndLands4 жыл бұрын
That's nuts. I rented this things little brother (BC1000XL) this weekend, and earpro was 100% required.
@hebergarcia55467 жыл бұрын
Necrsito una chipper para picar solamente rama delgada que modelo o serie me recomlendan ustedes
@richardmercado62855 жыл бұрын
Heber Garcia 1000xl compa
@tahraqapie47835 жыл бұрын
a vagaina has no limits
@bretthovey56342 жыл бұрын
that poor bobcat
@StinkyPete6911 жыл бұрын
maybe if you had an outdoor burner.
@mruk-pq5ol2 жыл бұрын
ÓW.
@kennethhuff71583 жыл бұрын
You just chipped up a few hundred dollars in 2x4's .
@godmort3 жыл бұрын
I'm hearing you but pawn in Australia is not worth much money and we don't have the meals to support local arborist to Mill timber I am looking forward to someone to invest milling local timber
@hevertorres50375 жыл бұрын
Absolutely terrible why would you force the machines like that.They are high power but shouldn't be misused.
@GroovesAndLands4 жыл бұрын
The machine has an automatic feeder that forces the log into the knives, then stops while the knives chew it up - then automatically forces more log in.
@aloisiomuguira51596 жыл бұрын
How much?
@harjitsingh2169 жыл бұрын
But is prize this machine
@phil.paulastocks22768 жыл бұрын
What a waste of potential lumber!!!
@bunnywarren8 жыл бұрын
The price they would get for the lumber would probably be less than the amount it would cost to transport and process it.
@danielm77947 жыл бұрын
Phil.Paula Stocks what about biomass heating
@GroovesAndLands4 жыл бұрын
Nah, there's lots of great uses for the woodchips. They turn into rich soil after a year or two when spread out. They're great.
@Droprite13 жыл бұрын
should have bought a rayco 20xp would not have needed 3 min of video to show a little log go threw lol
@Tdaz25013 жыл бұрын
I gotta say that sounds terrible for the engine
@porscha9014 жыл бұрын
Im having dinner mmmmmmmm
@elieltonsbrussi94763 жыл бұрын
No Brasil e uma bosta a assistência só tem em uma cidade e ainda não Paçao informação de nada no Brasil não recomendo se der problema está fudido que tem a máquina. Pois assistência e uma porcaria.